Vancouver, WA
HRS
M-TH 9A-11:30/12:30-5P | F-SU CLOSED
Shipping Estimator Shipping Estimator
- Menu
- New Products
- 7th Gear Membership
- CorkSport Merch
- Mazda Performance Air Intake Systems
- Mazda Springs
- Mazda Turbo Upgrade Kits & Parts
- Mazda Brake Kits & Parts
- Mazda Performance Exhausts
-
Mazdaspeed 3
- Mazda 3 Turbo
-
Mazda 3 Peformance Parts
- Mazdaspeed 6
- Mazda 6
- Mazda Miata/MX5
- Mazda CX3
- Mazda CX-30
- Mazda CX5
- Mazda CX-50
- Mazda CX7
- 2016+ Mazda CX9
- 2010-2014 Mazda 2
- Mazdaspeed Miata
- Mazdaspeed Protege
- Mazda Protege
- Mazda RX7
- Mazda RX8
- General Application
Mazda 3 Brake Lines Stainless Steel Braided - 2014-2018
One of the best ways to improve the braking feel in your Mazda 3 is to replace the factory rubber brake lines with a set of stainless steel reinforced brake lines front and rear. Designed specifically for the 2014-2018 Mazda 3, so they fit just as well as they perform. Featuring a PTFE inner liner that is surrounded by a stainless steel weave to restrict the expansion of the brake lines. Lastly, they are coated in a PVC covering to protect the braiding and PTFE liner from debris and moisture.
Read The BlogThe Best CS Stainless Steel Brake Lines For Your Mazda!
The CorkSport Advantage
Fitment & Design:
Designed to be a direct OEM replacement upgrade, the CorkSport Performance Brake Lines come with all the necessary hardware and mounting points to fit like OEM.
Materials:
With Durability and performance in mind, the CorkSport Brake Lines utilize a three-layer design. The innermost layer is a PTFE liner that contains the brake fluid. The middle layer is the stainless steel braided mesh; this gives the brake line its performance strength and resistance to expansion. Lastly is the outermost layer that protects the brake line. This is a PVC coating that protects from debris and moisture.
Performance:
Simple and effective define the CorkSport Brake Lines. Replacing the old rubber OEM line with a braided stainless line reduces flex and expansion of the brake line directly increasing braking performance. You can feel this in the car with a firmer pedal.
Hardware and Accessories:
New hardware consisting of banjo bolts and crush washers round out the kit for an easy install. The only additional component needed to complete the installation is brake fluid that meets the OE requirements.
- Proper bleeding of the brakes after brake line installation is critical to the operation of the braking system.
Additional Features
- Vehicle Fitment: 2014-2018 Mazda 3
- Developed in America: Designed, tested, and validated in Vancouver, Washington, in the Pacific Northwest.
- CorkSport Service and Support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.
How To Install the Mazda 3 Brake Lines Stainless Steel Braided
It will take you Approx. 2 hours to install.
2 hour Install Time
3/5 Difficulty
2-Year Warranty
No CEL
When paired with the BBK, I feel like I can stop on a dime all the time.
These are a great upgrade for anyone who wants confidence in their brakes or anyone who is in the market for brake lines in general.
Do these fit the made in Mexico 2015 Mazda 3 or are they for the made in Japan?
They will both
Can these cables be used to future-proof any upgrade to BBK?
These are designed only for the OEM caliper, if you buy our big brake kit it will come with its own proprietary set of lines.
Do these fit the 3rd gen mazda 6 also?
These are only tested on a 3rd gen Mazda3 and have not been test fitted in on the Mazda6
Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.
Fits
2014-2018 Mazda 3
- 2014 Mazda 3
- 2015 Mazda 3
- 2016 Mazda 3
- 2017 Mazda 3
- 2018 Mazda 3
Recommended Products Recommended Products
About CorkSport
ABOUT CORKSPORT