Free CS Backpack - New Orders Only!
Part Orders of $499 or More
Add Backpack + Use Code: CSBACKPACK
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

CorkSport Mazda Performance

Shipping Estimator Shipping Estimator

Get rates

Mazdaspeed 3, 3 inch Power Series Intake

16 reviewsWrite a review
 
Price: $299.99
Price in points: What are Points?300 points
Axl-6-276-63131
+−
Add to wish list

Mazdaspeed True 3 inch intake
** MAF recalibration with Accessport is required for product installation.**



Dramatically reduce intake restrictions and get an impressive improvement in power throughout the entire RPM range with the CorkSport Mazdaspeed Power Series 3" Intake System.

The Mazdaspeed True 3" Intake System is fabricated with a high polished 3 inch turbo inlet pipe and a true 3" inside diameter MAF housing. The velocity stack design smooths air flow for maximum performance. If you plan on upgrading or have already upgraded your turbo this upgrade is a must to keep your MAF sensor functioning within its calibrated range.

high flow Mazdaspeed maf
Up to a 35% increase in air flow over the OEM Maf housing.





  • Fitment:2007-2013 Mazdaspeed 3, 2006-2007 Mazdaspeed 6.
    • Designed Specifically for Mazda: All CorkSport parts have been designed and tested specifically for Mazdas.
    • True 3" MAF: Machined with a True 3" inside diameter MAF.
    • Turbo Inlet Pipe: A precision high polished 3" aluminum turbo inlet pipe..
    • Velocity Stack Design: Smooths the incoming air flow and increases the flow rate of air and reduces turbulence.
    • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter.
    • Custom Reinforced Silicone Connectors: Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow.
    • Upgraded Turbos: Highly recommended for Mazdaspeeds with upgraded turbos.
    • Replacement Air Filter is: Available Here
    • CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.
      • advisory header
    Best bang for your buck looks amazing under the hood sounds good and good power gain corksport did a awesome job as always
    Sebastian02/12/2019, 05:16 PM
    Very nice piece. It fit perfectly and I was very careful not to scratch the tube as the finish is flawless. The silicone is tough and the clamps are wicked.
    I love the sound of the turbo now, I had a 2.5" Mazdaspeed Intake before and sounded more like a pissed off blow dryer, this intake sounds great.

    The flare for the bypass valve hose is large so I really had to wrangle on the Corksport replacement bypass valve hose. Its never coming off!!!!

    Really sets off the engine bay.
    Kent Marven09/06/2018, 11:35 PM
    Quality fit and finish were as expected from corksport, perfect as always. Sounds great and looks almost stock under hood. However this intake with corksport's upgraded turbo does not fit with the stock ecu/battery box.
    Kyle Rankin08/27/2018, 09:38 AM
    this is a must! great quality and color options!
    Teun Ootes07/01/2017, 01:03 AM
    Not much I can say about this intake, other than its amazing; works and looks amazing. The Corksport intakes are very well made items. I had the regular stage II before this one. Both are great. It will most definitely be one of the sexiest thing under your hood.
    Christopher DeCaro03/16/2017, 01:06 PM
    Yes yes and yes. Ran this unit on in conjunction with the CS turbo & TMIC. Better intake sound than my other SRI. Larger MAF let me run the turbo with no restrictions. Was making 390 g / sec with this unit on the CS turbo @ 24lbs. The MazdaSpeed intake is a known choke. Top quality and would recommend for making numbers. Complete kit so no worries about this clamp or that. Huge filter looks great too. Tight but no fitment issues
    Tyler Blackman03/06/2017, 09:55 PM
    This intake is a must! Amazing color options for the engine bay to spice it up and wonderful construction of the product
    Joe Genuario02/04/2016, 06:40 PM
    Oh baby this looks sounds and feels awesome, unbelievable change to the car...she's a whole new beast!
    Chris Hyndman01/23/2015, 01:15 PM
    Wow, talk about a tight fit. Great job on not requiring a ECU relocate. Upgrading from the regular CS power series intake I must say, this baby frees up a lot of restriction on the turbo. After installing this intake I was able to lower my WGDC by at least 20% across the board. I have no longer have a problem of hitting and maintaining my boost targets. Keep up the good work!
    Littleloogy11/19/2014, 11:30 AM
    Difference between this and the power series 3 intake? Can I use this on a completely stock car?
    Bryan Calderon03/27/2014, 07:07 AM
    ← Prev
    12
    Next →
    Write a review
    Mazda performance parts financing is available with CorkSport

    Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

    Fits Models

    2007-2013 Mazdaspeed 3
    • 2007 Mazdaspeed 3
    • 2008 Mazdaspeed 3
    • 2009 Mazdaspeed 3
    • 2010 Mazdaspeed 3
    • 2011 Mazdaspeed 3
    • 2012 Mazdaspeed 3
    • 2013 Mazdaspeed 3
    2006-2007 Mazdaspeed 6
    • 2006 Mazdaspeed 6
    • 2007 Mazdaspeed 6
    2007-2012 Mazda CX-7
    • 2007 Mazda CX-7
    • 2008 Mazda CX-7
    • 2009 Mazda CX-7
    • 2010 Mazda CX-7
    • 2011 Mazda CX-7
    • 2012 Mazda CX-7

    Recommended Products Recommended Products

    Save $50.00
    Mazdaspeed 3/6 CST4 Turbocharger
    $1,199.99 $1,149.99
    Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
    $39.99
    Mazdaspeed 3 TMIC Top Mount Intercooler
    $399.99
    Mazdaspeed Boost Control Solenoid
    $129.99
    CorkSport 7th Gear
    $99.99