Save $10
Part Orders of $299 or More
Use Code: CORKSPORT10
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

CorkSport Mazda Performance

Shipping Estimator Shipping Estimator

Get rates

Mazdaspeed 3, 3 inch Power Series Intake

16 reviewsWrite a review
 
Price: $299.99
Price in points: What are Points?300 points
Axl-6-276-63130
+−
Add to wish list

Mazdaspeed True 3 inch intake
** MAF recalibration with Accessport is required for product installation.**



Dramatically reduce intake restrictions and get an impressive improvement in power throughout the entire RPM range with the CorkSport Mazdaspeed Power Series 3" Intake System.

The Mazdaspeed True 3" Intake System is fabricated with a high polished 3 inch turbo inlet pipe and a true 3" inside diameter MAF housing. The velocity stack design smooths air flow for maximum performance. If you plan on upgrading or have already upgraded your turbo this upgrade is a must to keep your MAF sensor functioning within its calibrated range.

high flow Mazdaspeed maf
Up to a 35% increase in air flow over the OEM Maf housing.





  • Fitment:2007-2013 Mazdaspeed 3, 2006-2007 Mazdaspeed 6.
    • Designed Specifically for Mazda: All CorkSport parts have been designed and tested specifically for Mazdas.
    • True 3" MAF: Machined with a True 3" inside diameter MAF.
    • Turbo Inlet Pipe: A precision high polished 3" aluminum turbo inlet pipe..
    • Velocity Stack Design: Smooths the incoming air flow and increases the flow rate of air and reduces turbulence.
    • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter.
    • Custom Reinforced Silicone Connectors: Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow.
    • Upgraded Turbos: Highly recommended for Mazdaspeeds with upgraded turbos.
    • Replacement Air Filter is: Available Here
    • CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.

      • ** 07-09 Mazdaspeed 3 and Mazdaspeed 6 must make ecu or battery modifications for fitment.
      ** Does not fit with CorkSport cold air box.
      ** This system is not CARB approved..



      ** MAF recalibration with Accessport is required for product installation.**
      ** MAF Calibration Instructions
      ** MAF Calibration Table






    Does this not fit on the 06 mazdaspeed6?
    Casey03/05/2014, 08:09 AM
    doing things right takes time
    Ricardo Rodriguez02/28/2014, 04:49 PM
    Will the tip get a option to be powdered coated or ceramic coated black
    Nick02/21/2014, 10:07 PM
    k I gotta ask! can I buy just clamps, MAF, and Filter only ? or is this a strictly buy full kit. kinda thing? fingers crossed. srry 300$ sexy price for beautiful flawless design that iv come to know and love from yall. but if I could save a few buxs id enjoy that to :)
    Matthew Newton02/21/2014, 06:23 AM
    Will this fit with the sri/fmic piping?
    Matt Harris02/18/2014, 06:53 AM
    Will this fit with the sri/fmic piping?
    Matt Harris02/18/2014, 06:53 AM
    ← Prev
    12
    Next →
    Write a review

    I currently have FBO with the CST4 with the Corksport Stage 2 SRI that is hitting its wall at about 340whp. Without fueling upgrades, will this intake be enough to reach my fueling limits, or will the 3.5 inch be needed?

    Asked by Timothy Nelson | 06/20/2020, 07:41 PM | 1 answer(s)

    Can I purchase an extra filter when ordering this intake? Thanks.

    Asked by BILL MAH | 01/18/2019, 08:47 AM | 1 answer(s)

    Are there any plans to get this intake CARB certified in the near future?

    Asked by Kolby Knickerbocker | 09/10/2018, 05:07 PM | 1 answer(s)

    Does this have fitment application to a 2007-2008 CX-7? With HPFP, & versatune? Or is their another option with similar benefits? I have the speed3-speed6 corksport turbo but was told my incompetent mechanic that it doesn't fit and can't fit? So it's not been installed yet

    Asked by Thomas | 05/03/2018, 05:27 AM | 1 answer(s)

    Will the 3 inch intake work with your FMIC for gen1 Mazdaspeed3??

    Asked by Johanan N. | 02/27/2018, 10:21 AM | 1 answer(s)

    Hi does this product need addition items to be purchased with or does it work on oem parts?

    Asked by Omar Ferdous | 12/12/2016, 10:35 AM | 1 answer(s)

    Well I got my intake today. I installed it with with no problems, but hard a hard time getting the bypass hose to stretch enough to fit on to the turbo inlet. But my biggest problem is I have no way to calibrate the maf. Cobb no longer has "cobb tuner race" what is my next option???

    Asked by Kyle D | 08/28/2016, 07:13 AM | 1 answer(s)

    Will this work fine with just a MAF recalibration via the AP? Do I absolutely need to get it professionally tuned (for the safety of my engine)? I live in California so I'm trying to think ahead to when it's time to get smogged and need to revert back to stock. Don't want to deal with tuning every time...

    Asked by Maria | 06/22/2016, 10:36 AM | 1 answer(s)

    What battery/ecu modification is needed for the MS6?

    Asked by Justin Burgess | 04/07/2016, 08:35 PM | 0 answer(s)

    What battery modification is required for the MS6?

    Asked by Justin Burgess | 04/07/2016, 08:34 PM | 1 answer(s)

    A tuner told me that I would need a hpfp in order to run this intake and map recalibration. Is this true or would my car run perfectly fine without the internals? I have boost tubes and a test pipe installed

    Asked by Tarango | 03/01/2016, 09:30 AM | 1 answer(s)

    What would be the cause of me not getting the Maf sensor with this. Is it an urgent thing to get it right away?

    Asked by Ctango | 01/14/2016, 09:28 AM | 1 answer(s)

    What's the difference between the power series and the stage 2 short ram.

    Asked by Caezar tarango | 01/02/2016, 02:48 PM | 1 answer(s)

    So can the coupler fit on a GTX3076R turbo?

    Asked by Brian Reza | 10/12/2015, 06:26 PM | 1 answer(s)

    Does this come with a coupler for a BNRs3 or a bigger turbo ?

    Asked by shortliv3ed | 10/11/2015, 05:10 PM | 1 answer(s)

    Can this be ran without tuning or maf recalibration?

    Asked by Jon Nguyen | 09/04/2015, 07:36 AM | 1 answer(s)

    Will this intake ever get CARB approval?

    Asked by Steven | 08/05/2015, 09:39 AM | 1 answer(s)

    I am looking into getting this 3in power series intake and you guys don't have the battery box relocation kit for the 2009 MS3, will I need it to fit this intake? Do you have pictures of the ECU/battery box mod that needs to be done with this install? Your help would be greatly appreciated.

    Asked by Jeff | 03/30/2015, 06:43 AM | 1 answer(s)

    Will this fit with your front mount intercooler?

    Asked by Bryan Calderon | 03/10/2015, 02:12 PM | 0 answer(s)

    Does the intake fit the mazdaspeed 3 and 6? Any adapters? Does the speed 6 and 3 use the same intakes ?

    Asked by Kenneth  | 12/18/2014, 12:42 PM | 1 answer(s)

    Is there some real power benefit (with stock turbo) comparing with CS Stage II Power Series Short Ram Intake?

    Asked by Juraj Dugáček | 12/09/2014, 02:25 PM | 1 answer(s)
    New post
    Mazda performance parts financing is available with CorkSport

    Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

    Fits Models

    Recommended Products Recommended Products

    Save $100.00
    Mazdaspeed 3/6 CST4 Turbocharger
    $1,199.99 $1,099.99
    Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
    $39.99
    Mazdaspeed 3 TMIC Top Mount Intercooler
    $399.99
    Mazdaspeed Boost Control Solenoid
    $129.99
    CorkSport 7th Gear
    $99.99