FREE CS Backpack!
Add $399 in Parts, Then Add Backpack!
Finally Use Code: CSBACKPACK
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

CorkSport Mazda Performance

Shipping Estimator Shipping Estimator

Get rates

Mazdaspeed 3 Performance Air Intake

Write a review
 
Price: $199.99
Price in points: What are Points?200 points
Axl-6-115-11130
+−
Add to wish list

One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.

Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3

CorkSport Short Ram Intake for Mazdaspeed 3
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Upgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe For the best value on the market
  • Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

How To Install the Mazdaspeed 3 Short Ram Intake.

It will take you Approx. 1 hour to install.

1 hour Install Time

1 hour Install Time

Difficulty: 2/5

2/5 Difficulty

2-Year Warranty

2-Year Warranty

No CEL

No CEL

Installation Instructions for the Mazdaspeed 3 Short Ram Intake

Actually feel a few more horses and it sounds amazing

Jedidiah Threadgill08/28/2011, 03:18 PM
You can't ask for a better value! After I installed this I noticed an amazing HP gain and It sounds so freaking cool now. You can really hear the turbo spooling. If you haven't bought one, do it NOW!
Michael Genna08/23/2011, 10:24 AM
No check engine light, easy to follow instructions, great gains, free sticker in the box! I am thrilled with my sir/tip and will gladly buy more fromt his great company.
Joe Hannigan08/21/2011, 10:11 AM
This was my first mod and I LOVE IT! I think that every one should do this mod first. Worth the money hands down.
Brian Rogers07/06/2011, 06:30 PM
Great product, impressive results. The sounds is great and coupled with other intake/exhaust mods and a tuning solution your MS3 will really put you in your seat!
Wilson Buck06/28/2011, 07:12 PM
For all of you who have been kicking around the idea of an intake (like I did for 9 months) just do yourself a favor and buy the Corksport intake/TIP combo. I cannot tell you how much of a blast the car is to drive now. There is a noticable increase in acceleration over 3000 rpm. The sound is awesome and LOUD - you can even hear the stock BPV now! I suggest getting the cold air box also to fill the hole in your engine bay and to protect the filter from any stray water/dirt.

The guys at CS were awesome and magicked up an airbox for me even though I was origonally told it might be a three week wait. The parts are manufactured and packaged well and the install isn't to bad - just make sure you have a longnose set of angled pliers handy - the longer the better!

Cannot speak highly enough of Corksport and their products/customer service.
Matt06/13/2011, 09:32 PM
Wow, simply amazing... very well constructed... the gains they claim you can feel, turbo spools much quicker, car feels like it just woke up... one of the best performance mods money can buy, my Mazda dealer even likes it... they have no issues about it at all. btw the sound you get is well worth the admission ticket...Thanks Corksport for producing such an amazing product
Cezary Koral05/21/2011, 04:50 PM
I have bought this, installed it, and love it aswell. However, my mazda dealership says i have to take it off or it will void my warranty. Any advice/suggestions?
Jamie04/16/2011, 08:55 PM
Amazing....the sound is great...the power is there...fun fun fun
Michael Ski04/06/2011, 07:54 PM
Hardest part is removing the old parts. Installed in about 30 minutes. Noticable HP increase. Well worth the money.
Thomas Busciglio02/13/2011, 02:01 PM
← Prev
12345678
Next →
Write a review

Description says dirt leaves filter from engine vibrations, but is there a specific cleaning process if it gets gunked up?

Asked by Nick | 03/23/2024, 10:17 AM | 1 answer(s)

Would this fit on COBB’s turbo inlet hose?

Asked by Fernando | 06/19/2023, 05:38 PM | 1 answer(s)

Hey there, does this intake come with a turbo inlet pipe to replace the stock?

Asked by Jason Vargas | 11/07/2021, 07:36 AM | 1 answer(s)

will this fit on a 07 mazda 5 ?

Asked by datmazda dude | 04/15/2021, 08:18 PM | 1 answer(s)

Were the horsepower figures arrived at with a hot engine and the hood closed? Wondering on the effects of pulling in the hot air from under the hood.

Asked by Keith | 07/12/2019, 06:23 AM | 1 answer(s)

If I already have a Corksport Turbo Inlet Pipe installed, this should attach directly to that with no issues, correct? Thanks in advance for an answer

Asked by Chaz | 02/16/2019, 12:56 PM | 1 answer(s)

Looking into intakes for my '07 ms3. Is this basically plug and play? Would I be safe doing this without a tune/HPFP internals? I don't plan on any other mods just yet.

Asked by Miguel Tejada | 10/24/2018, 08:05 AM | 1 answer(s)

Can this be run on stock MS3 2010 without high pressure fuel internals?

Asked by Spin | 08/18/2018, 02:00 PM | 1 answer(s)

Hi, is this a 3” air intake or 2 1/2”

Asked by Silas Galdamez | 02/23/2018, 02:50 PM | 1 answer(s)

Will this fit the 2008 Mazda 3 S? And is the sound people report over 3k rpms different from the sound of the intake resonator delete which also comes over 3k rpms?

Asked by Cameron | 01/12/2017, 05:43 AM | 2 answer(s)

Is this intake carb approved?

Asked by Mordecai | 05/13/2016, 01:03 PM | 1 answer(s)

Is this intake CARB approved?

Asked by Fernand | 04/20/2016, 03:45 PM | 1 answer(s)

Does this intake require an engine tune? Like the Cobb Accessport? Also will it throw a check engine light?

Asked by Cody Lambert | 03/25/2015, 06:34 PM | 1 answer(s)

What is the ID of the MAF housing?

Asked by James | 02/22/2015, 01:32 AM | 1 answer(s)
New post
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits:

2007-2013 Mazdaspeed 3
  • 2007 Mazdaspeed 3
  • 2008 Mazdaspeed 3
  • 2009 Mazdaspeed 3
  • 2010 Mazdaspeed 3
  • 2011 Mazdaspeed 3
  • 2012 Mazdaspeed 3
  • 2013 Mazdaspeed 3
2007-2013 Mazda 3 MPS
  • 2007 Mazda 3 MPS
  • 2008 Mazda 3 MPS
  • 2009 Mazda 3 MPS
  • 2010 Mazda 3 MPS
  • 2011 Mazda 3 MPS
  • 2012 Mazda 3 MPS
  • 2013 Mazda 3 MPS
2007-2013 Mazdaspeed Axela
  • 2007 Mazdaspeed Axela
  • 2008 Mazdaspeed Axela
  • 2009 Mazdaspeed Axela
  • 2010 Mazdaspeed Axela
  • 2011 Mazdaspeed Axela
  • 2012 Mazdaspeed Axela
  • 2013 Mazdaspeed Axela

Jedidiah Threadgill
Comment
Actually feel a few more horses and it sounds amazing

Michael Genna
Comment
You can't ask for a better value! After I installed this I noticed an amazing HP gain and It sounds so freaking cool now. You can really hear the turbo spooling. If you haven't bought one, do it NOW!
Joe Hannigan
Comment
No check engine light, easy to follow instructions, great gains, free sticker in the box! I am thrilled with my sir/tip and will gladly buy more fromt his great company.
Brian Rogers
Comment
This was my first mod and I LOVE IT! I think that every one should do this mod first. Worth the money hands down.
Wilson Buck
Comment
Great product, impressive results. The sounds is great and coupled with other intake/exhaust mods and a tuning solution your MS3 will really put you in your seat!
Matt
Comment
For all of you who have been kicking around the idea of an intake (like I did for 9 months) just do yourself a favor and buy the Corksport intake/TIP combo. I cannot tell you how much of a blast the car is to drive now. There is a noticable increase in acceleration over 3000 rpm. The sound is awesome and LOUD - you can even hear the stock BPV now! I suggest getting the cold air box also to fill the hole in your engine bay and to protect the filter from any stray water/dirt.

The guys at CS were awesome and magicked up an airbox for me even though I was origonally told it might be a three week wait. The parts are manufactured and packaged well and the install isn't to bad - just make sure you have a longnose set of angled pliers handy - the longer the better!

Cannot speak highly enough of Corksport and their products/customer service.
Cezary Koral
Comment
Wow, simply amazing... very well constructed... the gains they claim you can feel, turbo spools much quicker, car feels like it just woke up... one of the best performance mods money can buy, my Mazda dealer even likes it... they have no issues about it at all. btw the sound you get is well worth the admission ticket...Thanks Corksport for producing such an amazing product
jamie
Comment
I have bought this, installed it, and love it aswell. However, my mazda dealership says i have to take it off or it will void my warranty. Any advice/suggestions?
Michael Ski
Comment
Amazing....the sound is great...the power is there...fun fun fun
Thomas Busciglio
Comment
Hardest part is removing the old parts. Installed in about 30 minutes. Noticable HP increase. Well worth the money.
← Prev
12345678
Next →

Recommended Products Recommended Products

Mazdaspeed 3 Lowering Spring Set
$279.99
Mazdaspeed 3/6 CST4 Turbocharger
$1,199.99
Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
$39.99
Mazdaspeed 3 TMIC Top Mount Intercooler
$399.99
Mazdaspeed Boost Control Solenoid
$129.99
CorkSport 7th Gear
$99.99