Performance Air Intake | Short Ram Intake

One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.

Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3

CorkSport Short Ram Intake for Mazdaspeed 3

Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
Upgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe For the best value on the market
Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

How To Install the Mazdaspeed 3 Short Ram Intake.

It will take you Approx. 1 hour to install.

1 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Actually feel a few more horses and it sounds amazing

Jedidiah Threadgill08/28/2011, 03:18 PM

You can't ask for a better value! After I installed this I noticed an amazing HP gain and It sounds so freaking cool now. You can really hear the turbo spooling. If you haven't bought one, do it NOW!

Michael Genna08/23/2011, 10:24 AM

No check engine light, easy to follow instructions, great gains, free sticker in the box! I am thrilled with my sir/tip and will gladly buy more fromt his great company.

Joe Hannigan08/21/2011, 10:11 AM

This was my first mod and I LOVE IT! I think that every one should do this mod first. Worth the money hands down.

Brian Rogers07/06/2011, 06:30 PM

Great product, impressive results. The sounds is great and coupled with other intake/exhaust mods and a tuning solution your MS3 will really put you in your seat!

Wilson Buck06/28/2011, 07:12 PM

For all of you who have been kicking around the idea of an intake (like I did for 9 months) just do yourself a favor and buy the Corksport intake/TIP combo. I cannot tell you how much of a blast the car is to drive now. There is a noticable increase in acceleration over 3000 rpm. The sound is awesome and LOUD - you can even hear the stock BPV now! I suggest getting the cold air box also to fill the hole in your engine bay and to protect the filter from any stray water/dirt.

The guys at CS were awesome and magicked up an airbox for me even though I was origonally told it might be a three week wait. The parts are manufactured and packaged well and the install isn't to bad - just make sure you have a longnose set of angled pliers handy - the longer the better!

Cannot speak highly enough of Corksport and their products/customer service.

Matt06/13/2011, 09:32 PM

Wow, simply amazing... very well constructed... the gains they claim you can feel, turbo spools much quicker, car feels like it just woke up... one of the best performance mods money can buy, my Mazda dealer even likes it... they have no issues about it at all. btw the sound you get is well worth the admission ticket...Thanks Corksport for producing such an amazing product

Cezary Koral05/21/2011, 04:50 PM

I have bought this, installed it, and love it aswell. However, my mazda dealership says i have to take it off or it will void my warranty. Any advice/suggestions?

Jamie04/16/2011, 08:55 PM

Amazing....the sound is great...the power is there...fun fun fun

Michael Ski04/06/2011, 07:54 PM

Hardest part is removing the old parts. Installed in about 30 minutes. Noticable HP increase. Well worth the money.

Thomas Busciglio02/13/2011, 02:01 PM

← Prev

1 2 3 4 567 8

Next →

Write a review

Would this fit on COBB’s turbo inlet hose?

Asked by Fernando | 06/19/2023, 05:38 PM | 1 answer(s)

Hey there, does this intake come with a turbo inlet pipe to replace the stock?

Asked by Jason Vargas | 11/07/2021, 07:36 AM | 1 answer(s)

will this fit on a 07 mazda 5 ?

Asked by datmazda dude | 04/15/2021, 08:18 PM | 1 answer(s)

Were the horsepower figures arrived at with a hot engine and the hood closed? Wondering on the effects of pulling in the hot air from under the hood.

Asked by Keith | 07/12/2019, 06:23 AM | 1 answer(s)

If I already have a Corksport Turbo Inlet Pipe installed, this should attach directly to that with no issues, correct? Thanks in advance for an answer

Asked by Chaz | 02/16/2019, 12:56 PM | 1 answer(s)

Hi, is this a 3” air intake or 2 1/2”

Asked by Silas Galdamez | 02/23/2018, 02:50 PM | 1 answer(s)

Looking into intakes for my '07 ms3. Is this basically plug and play? Would I be safe doing this without a tune/HPFP internals? I don't plan on any other mods just yet.

Asked by Miguel Tejada | 10/24/2018, 08:05 AM | 1 answer(s)

Can this be run on stock MS3 2010 without high pressure fuel internals?

Asked by Spin | 08/18/2018, 02:00 PM | 1 answer(s)

Will this fit the 2008 Mazda 3 S? And is the sound people report over 3k rpms different from the sound of the intake resonator delete which also comes over 3k rpms?

Asked by Cameron | 01/12/2017, 05:43 AM | 2 answer(s)