FREE CS Backpack!
Add $399 in Parts, Then Add Backpack!
Finally Use Code: CSBACKPACK
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

CorkSport Mazda Performance

Shipping Estimator Shipping Estimator

Get rates

Mazdaspeed 3 Performance Air Intake

Write a review
 
Price: $199.99
Price in points: What are Points?200 points
Axl-6-115-11130
+−
Add to wish list

One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.

Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3

CorkSport Short Ram Intake for Mazdaspeed 3
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Upgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe For the best value on the market
  • Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

How To Install the Mazdaspeed 3 Short Ram Intake.

It will take you Approx. 1 hour to install.

1 hour Install Time

1 hour Install Time

Difficulty: 2/5

2/5 Difficulty

2-Year Warranty

2-Year Warranty

No CEL

No CEL

Installation Instructions for the Mazdaspeed 3 Short Ram Intake

Do you need a tuner first



>>CorkSport Reply: No tuner is required.
Jeffmazdaspeed303/28/2013, 01:35 PM
he have a check engine or not whit this product??
Sim03/24/2013, 11:37 AM
Could not be happier with my deicision to go with this intake. The install was easy thanks to the great instructions provided by CorkSport and it just sounds amazing! Worth every penny for this level of quality. I look forward to CorkSport taking my money again in the future! Thanks!
Keolamai Shook03/21/2013, 12:06 PM
Wow just installed this SRI today and what a big difference in power and sound! Really can hear the boost now thanks guys!
Brandon03/14/2013, 02:43 PM
I have not purchased it yet because i have heard that any bolt on mod throws the check engine light and will void my warranty. only on the 2013 speed3 have i heard this is an issue. is this true or no??



>>CorkSport Reply:The SRI will not give you a check engine light and most well designed products will be fine of your 2013 Mazdaspeed 3. If you are in California look at our Stage II intake, it has a CARB approval.
Thomas03/06/2013, 05:18 PM
Arrived a lot quicker than expected and talk about awesome finish/fit! Only question I would have is one that deals with the instructions vs what the car really had - It says to in the end reconnect a breather valve (the little 90deg. pipe between the MAF housing and TIP) but my car (100% stock til now) had a cap on that breather valve with nothing to connect it to from the start. Was that a good or bad thing? Or is that something on the 2010+ ones? I have a 2008.



>>>CorkSport Reply>>> Sounds like your Mazdaspeed 3 has the TSB repair with the new breather routing and replacement valve cover. You are good to go with capping it off.
William D Robicheaux02/09/2013, 01:56 PM
CORKSPORT!!!!!!!you make fantastic products. I am three days in on a sri intake . I have not had a dry road to test it on yet ,but the the sound and the tire spin is notin but fun fun fun !!!!! will give another review after dry roads and exaust are installed . I live and work on US 129 "the TAIL OF THE DRAGON" if any one wants to start a corksport nation here in east tn contact me at mitch.stott@gmail.com
Mitch01/17/2013, 06:40 PM
CORKSPORT!!!!!!!you make fantastic products. I am three days in on a sri intake . I have not had a dry road to test it on yet ,but the the sound and the tire spin is notin but fun fun fun !!!!! will give another review after dry roads and exaust are installed . I live and work on US 129 "the TAIL OF THE DRAGON" if any one wants to start a corksport nation here in east tn contact me at mitch.stott@gmail.com
Mitch01/17/2013, 06:40 PM
Great product. Fits perfectly and you can hear turbo spool and hear the bov...
Jose Jimenez12/18/2012, 01:54 PM
Could not have wished for better quality sounds great hearing the air rushing in through the intake I was actually shocked at how poorand cheap the oem parts were in apperance and manufacture this goes to prove how good the Corksport boys are at producing such fantastic products which work how they were intended thanks
Michael Walker Melb Aust10/30/2012, 02:01 AM
← Prev
12345678
Next →
Write a review

Description says dirt leaves filter from engine vibrations, but is there a specific cleaning process if it gets gunked up?

Asked by Nick | 03/23/2024, 10:17 AM | 1 answer(s)

Would this fit on COBB’s turbo inlet hose?

Asked by Fernando | 06/19/2023, 05:38 PM | 1 answer(s)

Hey there, does this intake come with a turbo inlet pipe to replace the stock?

Asked by Jason Vargas | 11/07/2021, 07:36 AM | 1 answer(s)

will this fit on a 07 mazda 5 ?

Asked by datmazda dude | 04/15/2021, 08:18 PM | 1 answer(s)

Were the horsepower figures arrived at with a hot engine and the hood closed? Wondering on the effects of pulling in the hot air from under the hood.

Asked by Keith | 07/12/2019, 06:23 AM | 1 answer(s)

If I already have a Corksport Turbo Inlet Pipe installed, this should attach directly to that with no issues, correct? Thanks in advance for an answer

Asked by Chaz | 02/16/2019, 12:56 PM | 1 answer(s)

Looking into intakes for my '07 ms3. Is this basically plug and play? Would I be safe doing this without a tune/HPFP internals? I don't plan on any other mods just yet.

Asked by Miguel Tejada | 10/24/2018, 08:05 AM | 1 answer(s)

Can this be run on stock MS3 2010 without high pressure fuel internals?

Asked by Spin | 08/18/2018, 02:00 PM | 1 answer(s)

Hi, is this a 3” air intake or 2 1/2”

Asked by Silas Galdamez | 02/23/2018, 02:50 PM | 1 answer(s)

Will this fit the 2008 Mazda 3 S? And is the sound people report over 3k rpms different from the sound of the intake resonator delete which also comes over 3k rpms?

Asked by Cameron | 01/12/2017, 05:43 AM | 2 answer(s)

Is this intake carb approved?

Asked by Mordecai | 05/13/2016, 01:03 PM | 1 answer(s)

Is this intake CARB approved?

Asked by Fernand | 04/20/2016, 03:45 PM | 1 answer(s)

Does this intake require an engine tune? Like the Cobb Accessport? Also will it throw a check engine light?

Asked by Cody Lambert | 03/25/2015, 06:34 PM | 1 answer(s)

What is the ID of the MAF housing?

Asked by James | 02/22/2015, 01:32 AM | 1 answer(s)
New post
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits:

2007-2013 Mazdaspeed 3
  • 2007 Mazdaspeed 3
  • 2008 Mazdaspeed 3
  • 2009 Mazdaspeed 3
  • 2010 Mazdaspeed 3
  • 2011 Mazdaspeed 3
  • 2012 Mazdaspeed 3
  • 2013 Mazdaspeed 3
2007-2013 Mazda 3 MPS
  • 2007 Mazda 3 MPS
  • 2008 Mazda 3 MPS
  • 2009 Mazda 3 MPS
  • 2010 Mazda 3 MPS
  • 2011 Mazda 3 MPS
  • 2012 Mazda 3 MPS
  • 2013 Mazda 3 MPS
2007-2013 Mazdaspeed Axela
  • 2007 Mazdaspeed Axela
  • 2008 Mazdaspeed Axela
  • 2009 Mazdaspeed Axela
  • 2010 Mazdaspeed Axela
  • 2011 Mazdaspeed Axela
  • 2012 Mazdaspeed Axela
  • 2013 Mazdaspeed Axela

Jeffmazdaspeed3
Comment
Do you need a tuner first



>>CorkSport Reply: No tuner is required.
sim
Comment
he have a check engine or not whit this product??
Keolamai Shook
Comment
Could not be happier with my deicision to go with this intake. The install was easy thanks to the great instructions provided by CorkSport and it just sounds amazing! Worth every penny for this level of quality. I look forward to CorkSport taking my money again in the future! Thanks!
Brandon
Comment
Wow just installed this SRI today and what a big difference in power and sound! Really can hear the boost now thanks guys!
thomas
Comment
I have not purchased it yet because i have heard that any bolt on mod throws the check engine light and will void my warranty. only on the 2013 speed3 have i heard this is an issue. is this true or no??



>>CorkSport Reply:The SRI will not give you a check engine light and most well designed products will be fine of your 2013 Mazdaspeed 3. If you are in California look at our Stage II intake, it has a CARB approval.
William D Robicheaux
Comment
Arrived a lot quicker than expected and talk about awesome finish/fit! Only question I would have is one that deals with the instructions vs what the car really had - It says to in the end reconnect a breather valve (the little 90deg. pipe between the MAF housing and TIP) but my car (100% stock til now) had a cap on that breather valve with nothing to connect it to from the start. Was that a good or bad thing? Or is that something on the 2010+ ones? I have a 2008.



>>>CorkSport Reply>>> Sounds like your Mazdaspeed 3 has the TSB repair with the new breather routing and replacement valve cover. You are good to go with capping it off.
mitch
Comment
CORKSPORT!!!!!!!you make fantastic products. I am three days in on a sri intake . I have not had a dry road to test it on yet ,but the the sound and the tire spin is notin but fun fun fun !!!!! will give another review after dry roads and exaust are installed . I live and work on US 129 "the TAIL OF THE DRAGON" if any one wants to start a corksport nation here in east tn contact me at mitch.stott@gmail.com
mitch
Comment
CORKSPORT!!!!!!!you make fantastic products. I am three days in on a sri intake . I have not had a dry road to test it on yet ,but the the sound and the tire spin is notin but fun fun fun !!!!! will give another review after dry roads and exaust are installed . I live and work on US 129 "the TAIL OF THE DRAGON" if any one wants to start a corksport nation here in east tn contact me at mitch.stott@gmail.com
jose jimenez
Comment
Great product. Fits perfectly and you can hear turbo spool and hear the bov...
Michael Walker Melb Aust
Comment
Could not have wished for better quality sounds great hearing the air rushing in through the intake I was actually shocked at how poorand cheap the oem parts were in apperance and manufacture this goes to prove how good the Corksport boys are at producing such fantastic products which work how they were intended thanks
← Prev
12345678
Next →

Recommended Products Recommended Products

Mazdaspeed 3 Lowering Spring Set
$279.99
Mazdaspeed 3/6 CST4 Turbocharger
$1,199.99
Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
$39.99
Mazdaspeed 3 TMIC Top Mount Intercooler
$399.99
Mazdaspeed Boost Control Solenoid
$129.99
CorkSport 7th Gear
$99.99