360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Shipping Estimator Shipping Estimator

Mazdaspeed 3 Performance Air Intake

Old price: $199.99 Ā 
Price: $183.99
You save: $16.00Ā (8%)
Price in points: What are Points?184 points
Save $16.00
Axl-6-115-12120
Add to wish list

One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.

Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3

CorkSport Short Ram Intake for Mazdaspeed 3
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Upgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe For the best value on the market
  • Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

How To Install the Mazdaspeed 3 Short Ram Intake.

It will take you Approx. 1 hour to install.

1 hour Install Time

1 hour Install Time

Difficulty: 2/5

2/5 Difficulty

2-Year Warranty

2-Year Warranty

No CEL

No CEL

Installation Instructions for  the Mazdaspeed 3 Short Ram Intake

whats the diff. in the stages?



CorkSport Reply:TIP and CAI extensions
does this intake require a tune?



CorkSport Reply:No
Besides the power difference, is there a sound difference between the stage 1 and stage 2 intake? Which one is louder?



CorkSport Reply:Stage II is a little louder.
I just got a 2010 speed3. It happens to have a CP-E inlet pipe and CAI. I'd rather have a short ram intake. Question is: will your SRI work with the CP-E inlet pipe?



CorkSport Reply:If the CPE inlet is supported it will.
Trying to decide between this and the stage 2. How much more power will the stage 2 create?



CorkSport Reply: 7-8 hp and the Stage II intake is CARB approved.
my first Corksport product, installed this weekend, and i love it! nice to hear that turbo doing work for a change! kinda crazy how well mazda was able to silence it with the stock box. the instructions were perfect but i'd add one sidenote, if you're on an 09 MS3, the house clamp on the TIP was a B**** to get to, it's doable with some ingenuity but would be a lot easier with the battery housing/ECU harnesses removed...but i suppose if you are removing all that you might as well buy the Stage 2 version of this intake. Great product, excellent quality and excellent customer service (big thanks Spencer!) highly recommend for someone who wants to do some light bolt-ons
Easy Install. Great instructions. Looks great and sounds even better!
loving the sri! definitely can hear the turbo spool and the stock bov. i should have gotten the blue MAF housing. it was an easy install. instructions are right on. the only thing i was missing the hex to tighten my sensor but i have a set of hexes and found the right one. be careful when tightening the clamp that goes over the stock TIP as i may have cracked mine but so far its good.
I juste instal it on my car andmy exust tip is black . This is normal??



CorkSport Reply:The Mazdaspeed 3s all carbon up the exhaust tips stock or modified.
Ordered my short shift plate and Stage 1 SRI on May 28, and received my order on the 31st of May. Very fast shipping considering the order went vis US Postal Service from Washington State to Easter PA. Installed both the shift plate and the SRI in about an hour. Very easy install and very high quality products.



The short shift plate made shifting much more precise and quick. Awesome product. The SRI looks awesome and since the air box needed to be out of the way, I would recommend doing both of these mods at the same time. The sound of the turbo spooling and the BPV working is just awesome. I have not had the chance to really do any butt dynoing yet, but from what I can tell there is an increase in the force at which the car pulls.



Spending a couple of hundred bucks for this much fun and improvement in the car is a no brainer.
Write a review
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits:

2007-2013 Mazdaspeed 3
  • 2007 Mazdaspeed 3
  • 2008 Mazdaspeed 3
  • 2009 Mazdaspeed 3
  • 2010 Mazdaspeed 3
  • 2011 Mazdaspeed 3
  • 2012 Mazdaspeed 3
  • 2013 Mazdaspeed 3
2007-2013 Mazda 3 MPS
  • 2007 Mazda 3 MPS
  • 2008 Mazda 3 MPS
  • 2009 Mazda 3 MPS
  • 2010 Mazda 3 MPS
  • 2011 Mazda 3 MPS
  • 2012 Mazda 3 MPS
  • 2013 Mazda 3 MPS
2007-2013 Mazdaspeed Axela
  • 2007 Mazdaspeed Axela
  • 2008 Mazdaspeed Axela
  • 2009 Mazdaspeed Axela
  • 2010 Mazdaspeed Axela
  • 2011 Mazdaspeed Axela
  • 2012 Mazdaspeed Axela
  • 2013 Mazdaspeed Axela

Recommended Products Recommended Products