FREE CS Backpack!
Add $399 in Parts, Then Add Backpack!
Finally Use Code: CSBACKPACK
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

CorkSport Mazda Performance

Shipping Estimator Shipping Estimator

Get rates

Mazdaspeed 3 Performance Air Intake

Write a review
 
Price: $199.99
Price in points:  What are Points? 200 points
Axl-6-115-11130
+ −
Add to wish list

One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.

Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3

CorkSport Short Ram Intake for Mazdaspeed 3
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Upgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe For the best value on the market
  • Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

How To Install the Mazdaspeed 3 Short Ram Intake.

It will take you Approx. 1 hour to install.

1 hour Install Time

1 hour Install Time

Difficulty: 2/5

2/5 Difficulty

2-Year Warranty

2-Year Warranty

No CEL

No CEL

Installation Instructions for the Mazdaspeed 3 Short Ram Intake

whats the diff. in the stages?



CorkSport Reply:TIP and CAI extensions
Grant 01/22/2014, 10:53 AM
does this intake require a tune?



CorkSport Reply:No
Graaant 01/07/2014, 10:07 AM
Besides the power difference, is there a sound difference between the stage 1 and stage 2 intake? Which one is louder?



CorkSport Reply:Stage II is a little louder.
Mike 12/09/2013, 12:23 PM
I just got a 2010 speed3. It happens to have a CP-E inlet pipe and CAI. I'd rather have a short ram intake. Question is: will your SRI work with the CP-E inlet pipe?



CorkSport Reply:If the CPE inlet is supported it will.
Matt 12/01/2013, 02:50 PM
Trying to decide between this and the stage 2. How much more power will the stage 2 create?



CorkSport Reply: 7-8 hp and the Stage II intake is CARB approved.
Dan 10/22/2013, 10:34 PM
my first Corksport product, installed this weekend, and i love it! nice to hear that turbo doing work for a change! kinda crazy how well mazda was able to silence it with the stock box. the instructions were perfect but i'd add one sidenote, if you're on an 09 MS3, the house clamp on the TIP was a B**** to get to, it's doable with some ingenuity but would be a lot easier with the battery housing/ECU harnesses removed...but i suppose if you are removing all that you might as well buy the Stage 2 version of this intake. Great product, excellent quality and excellent customer service (big thanks Spencer!) highly recommend for someone who wants to do some light bolt-ons
Michael Davis 09/17/2013, 06:49 AM
Easy Install. Great instructions. Looks great and sounds even better!
Sam Bradford 08/22/2013, 11:33 AM
loving the sri! definitely can hear the turbo spool and the stock bov. i should have gotten the blue MAF housing. it was an easy install. instructions are right on. the only thing i was missing the hex to tighten my sensor but i have a set of hexes and found the right one. be careful when tightening the clamp that goes over the stock TIP as i may have cracked mine but so far its good.
RICARDO EVA 08/16/2013, 12:43 PM
I juste instal it on my car andmy exust tip is black . This is normal??



CorkSport Reply:The Mazdaspeed 3s all carbon up the exhaust tips stock or modified.
Marc 07/13/2013, 03:25 PM
Ordered my short shift plate and Stage 1 SRI on May 28, and received my order on the 31st of May. Very fast shipping considering the order went vis US Postal Service from Washington State to Easter PA. Installed both the shift plate and the SRI in about an hour. Very easy install and very high quality products.



The short shift plate made shifting much more precise and quick. Awesome product. The SRI looks awesome and since the air box needed to be out of the way, I would recommend doing both of these mods at the same time. The sound of the turbo spooling and the BPV working is just awesome. I have not had the chance to really do any butt dynoing yet, but from what I can tell there is an increase in the force at which the car pulls.



Spending a couple of hundred bucks for this much fun and improvement in the car is a no brainer.
John Pizzurro 05/31/2013, 12:29 PM
← Prev
1 2 3 4 5 6 7 8
Next →
Write a review

Description says dirt leaves filter from engine vibrations, but is there a specific cleaning process if it gets gunked up?

Asked by Nick | 03/23/2024, 10:17 AM | 1 answer(s)

Would this fit on COBB’s turbo inlet hose?

Asked by Fernando | 06/19/2023, 05:38 PM | 1 answer(s)

Hey there, does this intake come with a turbo inlet pipe to replace the stock?

Asked by Jason Vargas | 11/07/2021, 07:36 AM | 1 answer(s)

will this fit on a 07 mazda 5 ?

Asked by datmazda dude | 04/15/2021, 08:18 PM | 1 answer(s)

Were the horsepower figures arrived at with a hot engine and the hood closed? Wondering on the effects of pulling in the hot air from under the hood.

Asked by Keith | 07/12/2019, 06:23 AM | 1 answer(s)

If I already have a Corksport Turbo Inlet Pipe installed, this should attach directly to that with no issues, correct? Thanks in advance for an answer

Asked by Chaz | 02/16/2019, 12:56 PM | 1 answer(s)

Looking into intakes for my '07 ms3. Is this basically plug and play? Would I be safe doing this without a tune/HPFP internals? I don't plan on any other mods just yet.

Asked by Miguel Tejada | 10/24/2018, 08:05 AM | 1 answer(s)

Can this be run on stock MS3 2010 without high pressure fuel internals?

Asked by Spin | 08/18/2018, 02:00 PM | 1 answer(s)

Hi, is this a 3” air intake or 2 1/2”

Asked by Silas Galdamez | 02/23/2018, 02:50 PM | 1 answer(s)

Will this fit the 2008 Mazda 3 S? And is the sound people report over 3k rpms different from the sound of the intake resonator delete which also comes over 3k rpms?

Asked by Cameron | 01/12/2017, 05:43 AM | 2 answer(s)

Is this intake carb approved?

Asked by Mordecai | 05/13/2016, 01:03 PM | 1 answer(s)

Is this intake CARB approved?

Asked by Fernand | 04/20/2016, 03:45 PM | 1 answer(s)

Does this intake require an engine tune? Like the Cobb Accessport? Also will it throw a check engine light?

Asked by Cody Lambert | 03/25/2015, 06:34 PM | 1 answer(s)

What is the ID of the MAF housing?

Asked by James | 02/22/2015, 01:32 AM | 1 answer(s)
New post
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits:

2007-2013 Mazdaspeed 3
  • 2007 Mazdaspeed 3
  • 2008 Mazdaspeed 3
  • 2009 Mazdaspeed 3
  • 2010 Mazdaspeed 3
  • 2011 Mazdaspeed 3
  • 2012 Mazdaspeed 3
  • 2013 Mazdaspeed 3
2007-2013 Mazda 3 MPS
  • 2007 Mazda 3 MPS
  • 2008 Mazda 3 MPS
  • 2009 Mazda 3 MPS
  • 2010 Mazda 3 MPS
  • 2011 Mazda 3 MPS
  • 2012 Mazda 3 MPS
  • 2013 Mazda 3 MPS
2007-2013 Mazdaspeed Axela
  • 2007 Mazdaspeed Axela
  • 2008 Mazdaspeed Axela
  • 2009 Mazdaspeed Axela
  • 2010 Mazdaspeed Axela
  • 2011 Mazdaspeed Axela
  • 2012 Mazdaspeed Axela
  • 2013 Mazdaspeed Axela

Jedidiah Threadgill
Comment
Actually feel a few more horses and it sounds amazing

Galen Sanderlin
Comment
Installed it last weekend! My butt dyno definitely can tell the difference. The sound is brilliant. There is quite a bit less lag with turbo spooling. 2nd and 3rd gear pull really nicely.



I've been driving with the window open to hear its song.



It took me quite a bit longer to install than the instructions laid out, but it's done and I am extremely happy!!!
Stephen Biroc
Comment
Took me a little longer to install but was well worth it, Chris at corksport was super helpful and I'm so happy with how the car sounds and performs now, hands down amazing part!
vetter
Comment
good install and excellent quality. the sound is pretty cool
Justin Huntington
Comment
This item arrived quickly and well protected. The install went smoothly and the fit was very good. My expectations were modest even in light of the hefty power gains claimed by CorkSport. My expectations have definetely been exceeded. The power increase is phenomenal. The sound of air rushing in is addictive. I typically leave the radio off now with the side window down just to enjoy the sound. while unscientific, my "seat of the pants" dynometer confirms CorkSports power claims. This is a terrific modification and worth every penny at twice the price.
Gerald Rollason
Comment
I would like to start this review by stating my mechanical experience:

NONE

With that being said...wow!

I ordered the part on Sunday afternoon and received it Thursday (in Florida). Everything was packed with care, including the instructions. When the weekend finally rolled around, I requested a helping hand from my father-in-law and his tools. Seeing as this was my first installation of an aftermarket part, I thought I needed all the help I could get. Even though his help was greatly appreciated, looking back on it now, I realized I could have taken care of this myself. The instructions were perfect. From start to finish, everything was laid out in such an intuitive manner in the instructions, it would be difficult NOT to install it correctly! It took a little over 1 and 1/2 hours (if I had any prior mechanical experience, I'm sure it would have only taken about 40 minutes or less, but since I kept on referring back to the instructions every few moments to ensure a proper install, it took me longer). It really is shocking to see the factory parts that Mazda used. And when comparing them to Corksport's parts, it is a wonder the car even ran! When installing the parts, you can see the meticulous details that Corksport put into their parts, from the welding and bends, to the quality raw materials to make this Mazda scream now! And man does it scream! After installing the parts and ensuring everything was secure, I cranked her up and let her sit at idle to make sure I didn't get any CELs. After that period was over, it as time for the test drive. I wanted the full experience, so I rolled the windows down to hear the SRI and TIP pull in the air...but it wasn't my ears that caught the first difference, it was the "butt dyno." When I gave her some gas, I was grinning from ear to year. The additional power and sound still gets me every time. The car has more pull and a beautiful "Whoooosh!" sound kicks in when you give it some gas. Along with this, if you drive "like a normal person" you improve your gas mileage by a few mpg...but with the power and sound, it is awfully hard not to push the accelerator a little harder than normal.



After it is all said and done, I couldn't be happier. From detailed instructions to noticeable power gains, the total experience was flawless. Corksport has a customer for life! Great product and great service!
Jeremy Lyczewski
Comment
This is the first mod that you should do on your Mazdaspeed3!! What a difference it makes and the sound of the turbo spool makes driving your speed a whole new beast. The installation instructions that are provided by Corksport are perfect and easy to follow so installing this mod is no problem. Thank you Corksport for making such a high quality mod! Don’t wait, the SRI and TIP are worth the money and it is the best value compared to any other company. Stop reading reviews and pick this up now!!
Jason Steinley
Comment
this is a great product for the money adds great power, and sounds great to boot........ however the first mod should be the motor mount insert, but this for sure should be the second.
Corey May
Comment
My first mod on my 2012 ms3. Excellent quality. Best bang for the buck. Easy install. Love the sounds. Good job Corksport... :)

VinnyTheBush
Comment
real quality parts and great shipping customer service cant be beat and if mapped with the cobb tuner this intake is the best
← Prev
1 2 3 4 5 6 7 8
Next →

Recommended Products Recommended Products

Mazdaspeed 3 Lowering Spring Set
$279.99
Mazdaspeed 3/6 CST4 Turbocharger
$1,199.99
Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
$39.99
Mazdaspeed 3 TMIC Top Mount Intercooler
$399.99
Mazdaspeed Boost Control Solenoid
$129.99
CorkSport 7th Gear
$99.99