Performance Air Intake | Short Ram Intake

One of the easiest and most beneficial performance enhancements you can do for your Mazdaspeed3 ,the Short Ram Air Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. The Mazdaspeed 3 Short Ram Performance Intake includes our precision machined MAF housing made from one piece of billet aluminum with included air straightener, durable dry flow air filter, and custom reinforced silicone connector. In initial testing, the Mazdaspeed 3 Short Ram Intake netted peak gains of +12HP and +17 lb torque.

Read The BlogProduct Release! Corksport Stage One Power Series Short Ram Intake for Mazdaspeed 3

CorkSport Short Ram Intake for Mazdaspeed 3

Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF housing is precision machined from billet aluminum with included air straightener.
Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
Stainless steel T-bolt clamps: Comes with polished stainless and ensure an airtight seal which prevents unmetered airflow
Upgrade to a CARB legal Stage Two Mazdaspeed Intake with a Turbo Inlet Pipe For the best value on the market
Corksport Service and Support: Receive a two-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

How To Install the Mazdaspeed 3 Short Ram Intake.

It will take you Approx. 1 hour to install.

1 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

whats the diff. in the stages?

CorkSport Reply:TIP and CAI extensions

Grant01/22/2014, 10:53 AM

does this intake require a tune?

CorkSport Reply:No

Graaant01/07/2014, 10:07 AM

Besides the power difference, is there a sound difference between the stage 1 and stage 2 intake? Which one is louder?

CorkSport Reply:Stage II is a little louder.

Mike12/09/2013, 12:23 PM

I just got a 2010 speed3. It happens to have a CP-E inlet pipe and CAI. I'd rather have a short ram intake. Question is: will your SRI work with the CP-E inlet pipe?

CorkSport Reply:If the CPE inlet is supported it will.

Matt12/01/2013, 02:50 PM

Trying to decide between this and the stage 2. How much more power will the stage 2 create?

CorkSport Reply: 7-8 hp and the Stage II intake is CARB approved.

Dan10/22/2013, 10:34 PM

my first Corksport product, installed this weekend, and i love it! nice to hear that turbo doing work for a change! kinda crazy how well mazda was able to silence it with the stock box. the instructions were perfect but i'd add one sidenote, if you're on an 09 MS3, the house clamp on the TIP was a B**** to get to, it's doable with some ingenuity but would be a lot easier with the battery housing/ECU harnesses removed...but i suppose if you are removing all that you might as well buy the Stage 2 version of this intake. Great product, excellent quality and excellent customer service (big thanks Spencer!) highly recommend for someone who wants to do some light bolt-ons

Michael Davis09/17/2013, 06:49 AM

Easy Install. Great instructions. Looks great and sounds even better!

Sam Bradford08/22/2013, 11:33 AM

loving the sri! definitely can hear the turbo spool and the stock bov. i should have gotten the blue MAF housing. it was an easy install. instructions are right on. the only thing i was missing the hex to tighten my sensor but i have a set of hexes and found the right one. be careful when tightening the clamp that goes over the stock TIP as i may have cracked mine but so far its good.

RICARDO EVA08/16/2013, 12:43 PM

I juste instal it on my car andmy exust tip is black . This is normal??

CorkSport Reply:The Mazdaspeed 3s all carbon up the exhaust tips stock or modified.

Marc07/13/2013, 03:25 PM

Ordered my short shift plate and Stage 1 SRI on May 28, and received my order on the 31st of May. Very fast shipping considering the order went vis US Postal Service from Washington State to Easter PA. Installed both the shift plate and the SRI in about an hour. Very easy install and very high quality products.

The short shift plate made shifting much more precise and quick. Awesome product. The SRI looks awesome and since the air box needed to be out of the way, I would recommend doing both of these mods at the same time. The sound of the turbo spooling and the BPV working is just awesome. I have not had the chance to really do any butt dynoing yet, but from what I can tell there is an increase in the force at which the car pulls.

Spending a couple of hundred bucks for this much fun and improvement in the car is a no brainer.

John Pizzurro05/31/2013, 12:29 PM

← Prev

1 234 5 6 7 8

Next →

Write a review

Would this fit on COBB’s turbo inlet hose?

Asked by Fernando | 06/19/2023, 05:38 PM | 1 answer(s)

Hey there, does this intake come with a turbo inlet pipe to replace the stock?

Asked by Jason Vargas | 11/07/2021, 07:36 AM | 1 answer(s)

will this fit on a 07 mazda 5 ?

Asked by datmazda dude | 04/15/2021, 08:18 PM | 1 answer(s)

Were the horsepower figures arrived at with a hot engine and the hood closed? Wondering on the effects of pulling in the hot air from under the hood.

Asked by Keith | 07/12/2019, 06:23 AM | 1 answer(s)

If I already have a Corksport Turbo Inlet Pipe installed, this should attach directly to that with no issues, correct? Thanks in advance for an answer

Asked by Chaz | 02/16/2019, 12:56 PM | 1 answer(s)

Hi, is this a 3” air intake or 2 1/2”

Asked by Silas Galdamez | 02/23/2018, 02:50 PM | 1 answer(s)

Looking into intakes for my '07 ms3. Is this basically plug and play? Would I be safe doing this without a tune/HPFP internals? I don't plan on any other mods just yet.

Asked by Miguel Tejada | 10/24/2018, 08:05 AM | 1 answer(s)

Can this be run on stock MS3 2010 without high pressure fuel internals?

Asked by Spin | 08/18/2018, 02:00 PM | 1 answer(s)

Will this fit the 2008 Mazda 3 S? And is the sound people report over 3k rpms different from the sound of the intake resonator delete which also comes over 3k rpms?

Asked by Cameron | 01/12/2017, 05:43 AM | 2 answer(s)