CorkSport Big Brake calipers provide the ultimate in stopping power for your Mazda. Crafted from extremely lightweight billet aluminum, the CorkSport calipers use an opposed-piston design that is fixed to provide greatly improved pad wear, and caliper rigidity over the OEM design. At just over 7 lbs, the aluminum CorkSport Big Brake Kit shaves almost 8 lbs of unsprung weight off each corner of your Mazda, all while adding more stopping power and a much better pedal feel. Available in 3 anodized colors, this brake system includes everything you need to easily upgrade your stock braking system and includes: High strength steel brackets, calipers, stainless steel braided front brake lines, brake pads, and all necessary hardware. Just install and go, no searching for extra parts or ordering additional items. Fits2004-2013 Mazda 3 and Mazdaspeed 3 2007-2013 with the use of OEM sized Mazdaspeed 3 rotors.
With aluminum pistons, and dual high-temperature O-rings instead of fragile dust boots, the CorkSport Big Brake Calipers are perfect for daily driving, spirited runs in the mountains or track day fun.

The CorkSport Advantage:

Superior Construction: Crafted from billet aluminum and made to last with durable components

Longevity: With dual O-rings far away from the brake pads these calipers are able to handle much more abuse than typical dust boot equipped calipers.

Lightweight: At just over 7lbs a side, this kit saves almost 8lbs of unsprung weight per corner!

Cost Effective: We kept the cost lower by replacing just the Front Calipers, which have the most stopping power.

Versatile: Designed around a popular brake pad style (Hawk #HB700) (HB700B.562 HPS, HB700B.562 HPS5.0, HB700N.562 HP+, HB700W.562 DTC-30), you can use almost any brake pad compound available on the market.

Available in Three Colors: Choose from Black, Red or Blue in a durable anodized finish

Ease of Use: With simple hand tools you can change brake pads in minutes and with full rebuild-ability you can be back to factory fresh brakes in no time.

CorkSport Service and Support: Receive full color installation instructions, all of the needed installation hardware, and knowledgeable telephone support.

Note: Track use and/or extreme heat can fade the anodization resulting in a silver/gold finish. This does not affect performance of the brake kit.

**Worried about fitment with your custom wheels?? Print out this helpful template**

**New or resurfaced rotors are strongly recommended with the installation of this product**

**Mazda 3 Installation requires the rotors to be upgraded to Mazdaspeed 3 Rotors**

**Requires 5mm spacers when the caliper kit is installed on stock Mazdaspeed 3 wheels**

Watch a Full Install Video and How to Bleed Your Brakes Below

2007-2013 Mazdaspeed 3 Brake Upgrade Kit Video

How To Install Your CorkSport Mazdaspeed3 Caliper Upgrade Kit

It will take you three hours to install the CorkSport Caliper Upgrade Kit with our easy-to-use instructions.

3 Hour Install Time

3/5 Difficulty

2-Year Warranty

No CEL

Just wondering about fitment issues when running 19x8.5 wheels. Any clearance issues there? Will spacers be required? Have the TSW Nurburgring wheels

CorkSport Reply: Print out the template on the product page above and try it in your wheel.

Neel08/29/2013, 04:09 PM

I would like to second this comment ::::: "You should make a full 4 wheel brake upgrade kit. It should increase the rear brake rotor size to the same size fronts, for better stopping power. And the kit should also include your choice of regular rotors, slotted rotors, drilled rotors, or slotted-drilled rotors. I would buy that. "

Johnny08/26/2013, 07:57 PM

Will these fit a 2012 Skyactiv?

CorkSport Reply:With Mazdaspeed 3 rotors yes.

Drew08/15/2013, 05:03 PM

will brake pads be included with the kit or will they need to be purchased seperate

CorkSport Reply:Pads are included with the kit.

Kyle08/13/2013, 10:11 AM

do your guys' corksport pads fit these calipers as well? Looking to have a one stop shop kinda thing. Or is it ONLY 2006 WRX TR size pads?

CorkSport Reply:The only pad which fits is the 2006 WRX TR size pad.

Damien Huitron08/10/2013, 07:49 PM

Looks like an amazing product. Would you recommend buying a set for front AND back, or is that just overkill?

CorkSport Reply:The majority of the brake load is taken by the front. The rear stock brakes are more than enough unless you are endurance racing.

Jeremy08/06/2013, 09:57 PM

You should make a full 4 wheel brake upgrade kit. It should increase the rear brake rotor size to the same size fronts, for better stopping power. And the kit should also include your choice of regular rotors, slotted rotors, drilled rotors, or slotted-drilled rotors. I would buy that.

Dylan Wang08/02/2013, 03:01 AM

are these 4 piston?

CorkSport Reply:Yes they are.

Mike07/29/2013, 08:56 AM

will these work with the stock wheels ?

CorkSport Reply:The kit will work with stock Mazdaspeed 3 wheels.

Jay07/27/2013, 09:14 AM

for the price i'd love to buy a set! any idea if these will fit volvo C30's ? i know we can do an upgrade to ms3 brakes so i wouldnt see why not

CorkSport Reply: If you can use the Mazdaspeed 3 brake then these would fit when installed with the Mazdaspeed 3 rotors.

Chris07/17/2013, 04:30 PM

← Prev

1 2 3 4 567 8

Next →

Write a review

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Requires 5mm spacers when used with stock wheels

Fits

2004 Mazda 3
2005 Mazda 3
2006 Mazda 3
2007 Mazda 3
2008 Mazda 3
2009 Mazda 3
2010 Mazda 3
2011 Mazda 3
2012 Mazda 3
2013 Mazda 3

2007 Mazdaspeed 3
2008 Mazdaspeed 3
2009 Mazdaspeed 3
2010 Mazdaspeed 3
2011 Mazdaspeed 3
2012 Mazdaspeed 3
2013 Mazdaspeed 3

Neil Brosious

01/07/2014, 08:10 PM

Comment
Does the traction control and abs still work

CorkSport Reply:Yes. The caliper kit does not affect the wheel speed sensors.

Christopher Harris

01/09/2014, 01:31 PM

Comment
Have you guys tried to put speed rotors on the CX-5 because I run 20" wheels, and would love to have larger brakes (for looks and my heavier larger wheels) and would want this brake kit for improved stopping and aesthetic.

CorkSport Reply:The kit is different. Submit a product request to let our engineers this is something you would like to see being made. http://www.corksport.com/product-ideas.html

Neel

01/12/2014, 02:59 PM

Comment
Will you be offering different colors or as a custom order perhaps in the future?

CorkSport Reply:We only have the 3 colors available. Custom colors are not an option currently.

Alan

01/19/2014, 12:49 AM

Comment
Do these fit a stock mazda 3 2013 sedan?

If you have large enough wheels and you install them with Mazdaspeed 3 rotors yes. Check out the wheel template in the product listing to confirm if they fit with your wheels.

David Ferron

01/27/2014, 09:36 AM