Search resultsProducts found: 246

Designed specifically for the turbocharged 2.5L SkyActiv.

Improve power and sound in as little as 30 minutes.

Open up the poor flowing OEM intake system and let your turbo breathe

Open up the poor flowing OEM intake system and let your turbo breathe.

Laser cut and formed bracket supports the CS SRI in the engine bay

4-ply reinforced silicone removes the OE intake elbow for a smooth flow design.

Custom laser-cut silicone & precision laser cut bracket ensure a perfect fit.

Precision billet aluminum MAF housing guarantees no air leaks or CELs.

2018+ Mazda 6 Turbo 2.5L & 2016+ CX-9, 20...

$189.99

Quick view

Stock flange fitment, boost by 3500rpm and power to 7000...the CST4 is the turbo for your Mazdaspeed

Internal wastegate setup makes install straightforward and simple.

Add some noise and top end power in your Mazdaspeed with the 0.82 A/R EWG Turbine Housing

400whp+ Mazdaspeed 6 and all the power on under the curve

The easiest Mazdaspeed 3 400whp option today with functional IWG setup.

Included with all IWG turbos, a ceramic coated heatshield.

Mazdaspeed 3/6 CST4 Turbocharger

$1,099.99

Quick view

Tial is the best EWG option for the Mazdaspeed 3 and 6 and the CorkSport go to for our cast exhaust manifold.

304 stainless steel cosntruction ensures a long life of use on your Mazdaspeed.

Each Tial 44mm Wastegate includes an assortment of springs to allow you to tailor the EWG for your Speed

The tial MVR EWG includes everything shown above, fitting, clamps and more to make installation a breeze with your Mazdaspeed turbo

The compact design allows for extra clearance and easy installation in the Mazdaspeed platform.

Save $43.00

Tial Mazdaspeed 3 and Mazdaspeed 6 MV-R W...

$435.99 $392.99

Quick view

Open up your Mazda 6 Turbo with the CorkSport Axle Back Exhaust.

High flowing resonators remove drone and other unwanted noise without affecting the Skyactiv 2.5T performance.

Retain the OEM oxygen sensor for no CELs and no tuning required for your Mazda 6 Turbo.

Polished 80mm piping looks great and livens up your Mazda 6.

Description: Gain some power and much needed noise from your SkyActiv Turbo.

2018+ Mazda 6 2.5L & 2.5L Turbo Axle Back...

$599.99

Quick view

Designed specifically for the 2017+ Mazda CX5 with SkyActiv 2.5L turbocharged engine

This axle-back exhaust system looks just as good as it sounds b. Exhaust-Upgrade-Mazda-CX5

Using the OEM mounting points, the beautiful stainless steel 80mm piping, resonators and exhaust tips fit just as good as the stock exhaust system

Liven up your 2.5T CX-5 with some volume without compromising the daily driving comfort.

Full stainless steel, TIG welded construction ensures strength and good looks for your Mazda Cx5

2017+ Mazda Cx5 Axle Back Exhaust

$599.99

Quick view

The CorkSport Coilovers offer great performance for the street or track.

15-way adjustable damping ensures you get the ride you prefer

Easy to access damper adjusters mean no disassembly needed to tune your ride and handling.

7K front springs and 8.5K rear springs offer supreme handling characteristics without being too stiff for the street.

Up to three degrees of negative camber in the front to perfect handling and wheel fitment.

Approximately 2 inches of height adjustability to dial in your stance

Change how your Mazda feels with an easy install that does not require a spring compressor.

Save $250.00

2004-2013 Mazdaspeed 3 & Mazda 3 Coilover...

$1,599.99 $1,349.99

Quick view

Laser Etched Specs

OEM Shape to fit onto your intake manifold

Easy plug and play connector. No extension harness needed

Perfect Seal with High Quality O-ring

Mazdaspeed 4.5 Bar MAP Sensor

$99.99

Quick view

Let your CX-9’s turbo breath better with the CorkSport Axle back Exhaust.

High flow, pass through resonators eliminate drone while retaining good flow characteristics.

Stainless steel construction ensures an exhaust that will last a lifetime.

Exhaust tips were extended and increased in size to fill out the bumper cutouts and give a clean look.

Spice up your grocery-getter with the some added noise and a nice visual boost.

2016+ Mazda CX-9 Axle Back Exhaust

$599.99

Quick view

Keep your Skyactiv engine healthy and clean with the CorkSport OCC

Prevent oil, fuel, and water vapors from entering your Skyactiv Turboengine

Billet aluminum construction ensures great fitment and durability for years to come

Hardware, brackets, and even a drain kit is all included to ensure an easy Mazda install.

Reinforced silicone hose is heat, chemical, and weather resistant to prevent leaks or tears

Bolt in OCC solution for your Skyactiv Turbo

2018+ Mazda 6 2.5L Turbo - Oil Catch Can Kit

$239.99

Quick view

The CS vacuum block helps clean up your Mazda engine bay.

Easily connect a boost gauge or methanol system without the need for tees

Precision machined billet aluminum is anodized for a long lasting finish that looks great

Seven 1/8" NPT threaded ports offer use with a variety of fittings

Simplify your vacuum and boost sources into one location

Small size and end mounting location gives tons of freedom for install location

Simplify your vacuum and boost sources into one location

Vacuum/Boost Distribution Block

$49.99

Quick view

Lightweight and strong design improves handling and driver feedback in your Mazda 6

2018+ Mazda 6 2.5L Turbo - Front Strut To...

$179.99

Quick view

The CST6 includes a free MAP sensor for your Mazdaspeed 3, 6, or Cx7

Stock flange Mazdaspeed 3 power record holder

Billet compressor wheel with the latest tech for quick response and airflow for your Mazdaspeed

Balanced rotating assembly for durability

Stock Mazdaspeed 3 and 6 downpipe bolt pattern

The stock flange Mazdaspeed power dyno pull

CST6 Turbo Upgrade - 2006-2013 Mazdaspeed

$1,499.99

Quick view

← Prev

1 2 3 4 5 6 7 8

Next → 2 - 16