If you’re replacing your injector seals or even an injector in your Mazdaspeed, the CorkSport Injector Puller is a must-have.

It eliminates the risk of damaging your injectors while looking good and staying strong for repeated use. You can even bundle it with our Injector Seals for a discount! Check out the video and info below to see the puller in action and get full details.

Check out the video and info below to see the puller in action and get full details.

User-Focused

We designed the CorkSport Injector Puller specifically for the injectors found in the 2.3L DISI MZR engine from the MS3 and MS6. The tool head slides directly over the end of the injector once the o-ring is removed and grips on the metal end of the injector. This prevents any damage to the end of the injector that is caused when using vice grips or pliers to remove the injectors.

The CorkSport Injector Puller is also easy to use. Using a simple slide hammer allows you to apply as little or as much force as you need to get your injectors out.

Materials & Manufacturing

The CorkSport Injector Puller utilizes T-304 stainless steel that is precision machined for great fitment every time. Additionally, stainless steel construction ensures that the injector puller stays strong and looking good for repeated use. Since the injectors are steel, aluminum injector pullers can be damaged during use and become unable to remove injectors

Vehicle Fitment:2007-2013 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, 2007-2012 Mazda CX-7
Designed in America: Designed, Manufactured, and Assembled in Vancouver, Washington, in the Pacific Northwest
CorkSport Service & Support: Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support at (360) 260-2675.

How To Assemble Your CorkSport DISI MZR Injector Puller Tool

It will take you less than 30 minutes hour to assemble with our easy-to-use instructions.

-30m Assembly

1/5 Difficulty

2-Year Warranty

No CEL

Used it a year ago when I was valve cleaning and cleaning injectors… and it turned what people described a nightmare of possibly damaged injectors into a breeze. I replaced with OEM seals at the time due to budget and being a fully stock Speed6, but now that I’m considering upgrading injectors seals (and throwing on the sweet CS Intake Manifold I have in a box) I have no doubts it will be smooth sailing again with this tool.

Alek Pfeiffer11/12/2025, 07:07 AM

Have you seen or heard of the horror stories in removing stuck stubborn injectors with built up carbon and junk ? I have and didn’t even want to risk it without having this tool on hand before starting the repairs . The best part is it’s easy to use like a little slide hammer and could be reused again cause we all got that friend that don’t listen to buy their own haha !
I was sending out my injectors to be cleaned and flow tested before installing my new CS injector seals and wanted to make sure they didn’t get damaged during removal and the job itself takes enough time you don’t need to waste downtime being pissed off you didn’t get this tool. For most of us these are weekend projects and when the time comes make sure to have all your bases covered the first time .

John Lehr02/14/2025, 08:15 AM

A must for anyone that does their own maintenance work or has an 8th port injection system. This gives me peace of mind that I wont accidentally break or tweak an injector and makes removal so much easier. Between all my cars, this has saved me a significant amount of time!

Jaclyn M03/06/2024, 09:01 AM

Wanna break your knuckles with pliers or whatever, go for it. Remove em easier with this. My injectors were fused with carbon, and this puller did not care. YOINK!

Raider02/27/2024, 03:45 PM

Awesome tool to get the job done. Make this fuel injector task easier for you with this tool. If i wouldn't had this tool in hand, it would of been a pain in the ass to get injectors out without screwing things up. Recommend this product 100%

Eliezer Perez02/08/2021, 05:46 PM

Why wouldn't you want to purchase this. This made perfectly for our platform and much strong and MORE durable than all others.

Christopher OConnor04/25/2018, 07:35 PM

Write a review

No FAQ found

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Christopher OConnor

04/25/2018, 07:35 PM

Comment
Why wouldn't you want to purchase this. This made perfectly for our platform and much strong and MORE durable than all others.

Eliezer Perez

02/08/2021, 05:46 PM

Comment
Awesome tool to get the job done. Make this fuel injector task easier for you with this tool. If i wouldn't had this tool in hand, it would of been a pain in the ass to get injectors out without screwing things up. Recommend this product 100%

Raider

02/27/2024, 03:45 PM

Comment
Wanna break your knuckles with pliers or whatever, go for it. Remove em easier with this. My injectors were fused with carbon, and this puller did not care. YOINK!

Jaclyn M

03/06/2024, 09:01 AM

Comment
A must for anyone that does their own maintenance work or has an 8th port injection system. This gives me peace of mind that I wont accidentally break or tweak an injector and makes removal so much easier. Between all my cars, this has saved me a significant amount of time!

John Lehr

02/14/2025, 08:15 AM

Comment
Have you seen or heard of the horror stories in removing stuck stubborn injectors with built up carbon and junk ? I have and didn’t even want to risk it without having this tool on hand before starting the repairs . The best part is it’s easy to use like a little slide hammer and could be reused again cause we all got that friend that don’t listen to buy their own haha !
I was sending out my injectors to be cleaned and flow tested before installing my new CS injector seals and wanted to make sure they didn’t get damaged during removal and the job itself takes enough time you don’t need to waste downtime being pissed off you didn’t get this tool. For most of us these are weekend projects and when the time comes make sure to have all your bases covered the first time .