LED Light Kit for 2014+ Mazda 3

CorkSport's LED light kit replaces the incandescent bulbs for the front and rear dome lights, vanity visor lights, license plate, and trunk lights. The lights are simple to install, with no custom adapters or wiring required.

The CorkSport Advantage:

Blue-White Color: 7000k color temperature enhances interior colors compared with the yellow light emitted by incandescent bulbs.
Retains the interior dimming: Dimmer light switch is still usable in the Mazda 3.
Longer lifespan: LED lights resist shock and vibration better than standard bulbs.
Less is more: LED lights generate less heat and have a lower power draw.
Simple Install: The kit includes 8 LED bulbs and includes vehicle specific installation instructions. Installation of the LED lights takes 30 minutes and requires only a small screwdriver.
CorkSport Service and Support:Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support.

Great kit, I’ve bought 2. One for my 3 and one for my CX9. They immediately elevated both interiors to a more premium feel and look. You will be amazed at just how much brighter these are than halogens.

Install is a cake walk, especially with the fantastic instructions that are given. The case that they come in is awesome too!

Tyler Lawson01/27/2025, 10:32 PM

These are a great upgrade! It's very quick and easy to install literally anybody could do it. All of the lights are quite bright, like superrrrrr bright compared to the stock halogens, except for the trunk light. I have the sedan model so maybe its different for the hatchback but the light brightness is almost the same as stock. They all look great and dim exactly like the stock halogens.

Ranen Larsen01/14/2025, 04:57 PM

This was my first purchase from CorkSport. it is an affordable modification that adds usefulness to your Mazda every time you are getting in and out of your vehicle at night. They are LED bulbs, they are super bright. Not much else to say about them. A+

Stephen W.04/10/2023, 06:05 AM

A quick easy upgrade to your interior and license plate lighting. Begone dim and yellow halogens, give your car a glimpse into the modern era of glorious LED illumination.
You may opt to keep your vanity lights stock as these are quite bright.

Joshua Sturtevant12/06/2022, 10:30 AM

Just Got done with LED Mod, Ez of installation with the instruction. Interior lighting looks great! For the price I think a plastic pry tool for cover removal should have been added to the kit. With that said thumbs up!

Juan01/29/2022, 09:14 AM

Very easy install but obnoxiously bright. Needs to be toned down

Justin05/01/2018, 05:22 PM

Agree with all recent posts about ease of install and classy look. Will only add that these are great for interior visibility and clarity in the dark. Bright but not overbearing, simple and easy mod with great utility and appearance. The license plate lights look really cool too.

Eric Riggs03/17/2017, 11:08 AM

Very simple straight for install, the hardest lights to install are more than likely going to be the rear seating lighting, and the license plate lights. (IMO toughest for me) If you have the plastic panel removing tools you will be fine no need to worry about scuffs or other damage. If using a metal flat head screw driver, I would recommend wrapping the flat head screw driver in clear packing tape (its durable and thin will allow easy access to small crevices.) to prevent scuffing damage to interior and exterior plastics. This also depends on the type of flat head used rough textured or smooth finish. The LED lights provide much more light and have a very clean and clear white glow to them. This is my first modification to my 2015 MZ3.

Quintin05/05/2016, 02:59 PM

Just finished installing these bad boys within my car. Will be having the girlfriend use her high definition camera to take some decent pictures for CS. Let me say this. Between the packaging itself, the instructions, the 2 YEAR WARRANTY, as well as the visible change in brightness. This is definitely one of those must have upgrades for anybody looking to give their M3 the luxury feel that it deserves. Great job.

Coulter McGraw10/08/2015, 02:36 PM

Great product, took 10 minutes to install all of them. no fitment issues, all the same color, simple easy to understand instructions. Mine came with 9 leds but I'm not sure what the ninth one is for... It's not in the instructions and is unlike the rest. It's a single led and its pictured on the product listing before you click the picture, but on the actual product page it is not pictured lol. Just curios what it might be for. I would recommend this product for sure, it makes the interior feel even more premium than it already is.

Benjamin Jacob09/24/2015, 04:04 PM

← Prev

12 3

Next →

Write a review

It is fully compatible with Mazda 3 2016 Sedan?

Asked by Rolando | 08/17/2021, 04:24 PM | 1 answer(s)

I bought PrecisionLED kit for around $90, last year, and have to keep replacing them cause they tend to start flickering, and not very long after installation. Is this a specific issue with Mazda that I can be sure these bulbs are resistant to?

Asked by Jason Johnston | 04/02/2019, 02:13 AM | 1 answer(s)

Do these fit a 2018 3 hatchback

Asked by Josh boettcher | 08/05/2018, 04:17 PM | 0 answer(s)

Would these fit a 2018 3 hatchback?

Asked by Josh boettcher | 07/28/2018, 09:57 AM | 1 answer(s)

Will these work in the 2018 models?

Asked by Justin | 06/26/2018, 08:43 PM | 1 answer(s)

Does this kit fit the 2018 Mazda 3 Hatchback?

Asked by Tim | 05/19/2018, 09:24 AM | 1 answer(s)

It is fully compatible with Mazda 3 2017 SportSedan?

Asked by David | 11/29/2016, 05:06 AM | 1 answer(s)

I used an inexpensive led set and the dome light would still glow when they should be off. Would these have the same issue? What makes these different from different sets out there?

Asked by Danny | 08/11/2016, 12:49 PM | 1 answer(s)

I purchased and installed this product in my 2014 Mazda 3. I am getting a lot of flickering from the map lights and vanity mirrors, is this normal? Can it be corrected?

Asked by Vaughn Macfarlane | 07/22/2016, 03:00 PM | 0 answer(s)

I purchased and installed this kit in my 2014 Mazda 3 but I am experiencing flickering from the map and vanity bulbs? Is this a common issue? Can it be fixed?

Asked by Vaughn Macfarlane | 07/21/2016, 08:29 PM | 0 answer(s)

How bright are the LEDs (lumen rating)?

Asked by Justin | 10/04/2015, 02:35 PM | 1 answer(s)

The lights arrived quickly and look great on my 2015 3HB! There was one tiny light in the front/center of the kit with nothing noted in the instructions for it. Any idea what that is for? It looks like it is marked T5-1P.

Asked by Chris M | 03/16/2015, 09:44 AM | 1 answer(s)

New post