2019+ Mazda 3 Front Strut Tower Bar | CorkSport Mazda Performance

If you’re looking to improve the driver feel and handling of your GEN4 Mazda 3, we are happy to help! The CorkSport Front Strut Tower Bar for 2019+ Mazda 3 connects the two front strut towers together, improving chassis stiffness and allowing the suspension to better do its job. This comes with a nice visual boost to your engine bay, and a super easy 15 minute install! Check out the product video and full info down below.

Read The Blog2019+ Mazda 3 – Front Strut Tower Bar is ready for action!

#ZoomZoom!

The CorkSport Advantage

Handling Focused:

The CorkSport Front Strut Tower Bar is designed to offer handling improvement by increasing chassis stiffness. By connecting the two front strut towers together, there will be reduced flex in the strut towers during cornering, allowing the suspension to function better. This is most easily noticed with better driver feedback and added stability, so you easily know what the car is doing. Don’t confuse chassis rigidity with an uncomfortable ride though, as when not cornering, the car will ride exactly the same as before!

Quality Materials & Visual Boost:

The CS strut bar is made out of 2024-T4 aluminum for the best balance of strength and lightness. The end brackets are made out of carbon steel that is laser cut and precision welded for the utmost in strength. The aluminum center section is fully polished and finished off with a CorkSport name badge for a clean look. The end brackets are powder coated black for corrosion resistance and a look that will match any engine bay.

Hardware & Installation:

All hardware needed for installation is included. The strut bar is connected to the brackets with chrome plated hardware for long lasting good looks and strength. We even supply replacement nuts for the tops of the struts to ensure plenty of thread engagement and final shiny touch. Best of all, the strut bar comes with full color installation instructions and can be installed in as little as 15 minutes!

Additional Features

Vehicle Fitment:2019+ Mazda 3 Sedan & Hatch.
Designed & Developed in America: Designed, tested, and validated in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

How To Install Mazda 3 Tower Brace

It will take you 30 minutes to install the CorkSport Mazda 3 Tower Brace with our easy-to-use instructions.

30 Minute Install Time

1/5 Difficulty

2-Year Warranty

No CEL

The car feels so much more solid on hard corners now and i have much more confidence in the car now

Lane Reinking12/13/2023, 04:54 PM

Installation was very simple thanks to Corksport's instructions. This high quality strut bar looks great under the hood and improves handling a lot.

Matthew Archer08/27/2023, 05:06 PM

Easy to install made a big difference in the handling it was my first suspension upgrade I also bought the rear sway bar I will install that this weekend I have heard that the two together are perfect but this bar by itself makes a large noticeable difference

Michael Briggs08/10/2023, 06:17 PM

Beautiful piece, and locks the front towers down with zero downside. Can't argue with a simple W

Aaron Maves09/02/2022, 10:07 AM

Easy to install, took maybe ten minutes. Looks great and the improvement in handling is noticeable right away. Roll is reduced a lot. This is the only suspension upgrade I have at the moment.

Jon06/16/2022, 07:18 AM

NO MORE SEVERE BODY ROLL IN THE FRONT END!!!! Helps significantly with the understeer feeling at high speed tight cornering. Now just need to figure out a sway bar solution, and life will be perfect…. GO BUY THIS!

Charlie D05/01/2022, 07:43 AM

Absolutely changed the feel of the car. Huge cornering confidence boost and increased handling feel. The difference is night and day ! Install was a breeze thanks to the detailed and clear instructions. Second mod from Corksport that I have on my car. Looking to upgrade more areas after this. Kudos to the team at Corksport for yet another high quality product. Couldn’t have been happier.

Anirudh Mamtora04/27/2022, 10:30 AM

Extremely easy install. Detailed instructions with pictures are always a plus.

James Petterway01/20/2022, 05:24 PM

Great installation information with really simple directions and pictures to getting this installed. Even has the torque specs as well to get this part locked down tight!

Ryan10/20/2021, 05:20 PM

Completely fixed the issues I’ve been chasing in the handling and stability department with the car. The car no longer wanders under hard braking or emergency braking from high speed. The car also doesn’t feel uncertain in hard corners anymore. I now realize there was a lot of flex in the front end, and the strut bar has really shut it down. If you autocross or push the car hard I’d say this is a must have.
Can’t wait till Corksport releases more suspension tuning for the new turbo 3

Stetson Rydberg10/16/2021, 09:11 PM

← Prev

12

Next →

Write a review

Does this fit the cx30?

Asked by Scott | 02/11/2023, 03:37 PM | 1 answer(s)

How much does this weigh?

Asked by Mike | 09/10/2022, 03:29 PM | 1 answer(s)

Any update for CX-30 fitment?

Asked by Samir T | 04/02/2022, 09:27 AM | 1 answer(s)

Any update on whether or not this fits the CX30 turbo?