If you’re looking to improve the driver feel and handling of your GEN4 Mazda 3, we are happy to help! The CorkSport Front Strut Tower Bar for 2019+ Mazda 3 connects the two front strut towers together, improving chassis stiffness and allowing the suspension to better do its job. This comes with a nice visual boost to your engine bay, and a super easy 15 minute install! Check out the product video and full info down below.

Read The Blog2019+ Mazda 3 – Front Strut Tower Bar is ready for action!

The CorkSport Advantage

Handling Focused:

The CorkSport Front Strut Tower Bar is designed to offer handling improvement by increasing chassis stiffness. By connecting the two front strut towers together, there will be reduced flex in the strut towers during cornering, allowing the suspension to function better. This is most easily noticed with better driver feedback and added stability, so you easily know what the car is doing. Don’t confuse chassis rigidity with an uncomfortable ride though, as when not cornering, the car will ride exactly the same as before!

Quality Materials & Visual Boost:

The CS strut bar is made out of 2024-T4 aluminum for the best balance of strength and lightness. The end brackets are made out of carbon steel that is laser cut and precision welded for the utmost in strength. The aluminum center section is fully polished and finished off with a CorkSport name badge for a clean look. The end brackets are powder coated black for corrosion resistance and a look that will match any engine bay.

Hardware & Installation:

All hardware needed for installation is included. The strut bar is connected to the brackets with chrome plated hardware for long lasting good looks and strength. We even supply replacement nuts for the tops of the struts to ensure plenty of thread engagement and final shiny touch. Best of all, the strut bar comes with full color installation instructions and can be installed in as little as 15 minutes!

Additional Features

Vehicle Fitment:2019+ Mazda 3 Sedan & Hatch.
Designed & Developed in America: Designed, tested, and validated in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

How To Install Mazda 3 Tower Brace

It will take you 30 minutes to install the CorkSport Mazda 3 Tower Brace with our easy-to-use instructions.

30 Minute Install Time

1/5 Difficulty

2-Year Warranty

No CEL

WILL IT FIT OK ON A MAZDA 2024 AWD TURBO ?

Asked by enzo | 11/01/2025, 11:54 AM | 1 answer(s)

Can the battery be swapped and the brake fluid filled with the bar installed?

Asked by Justin | 07/13/2025, 02:39 PM | 1 answer(s)

i was wondering if this would fit a 2025 Mazda 3 Sport GT turbo

Asked by Chuck | 05/18/2025, 10:52 AM | 1 answer(s)

Does this fit the cx30?

Asked by Scott | 02/11/2023, 03:37 PM | 1 answer(s)

How much does this weigh?

Asked by Mike | 09/10/2022, 03:29 PM | 1 answer(s)

Any update for CX-30 fitment?

Asked by Samir T | 04/02/2022, 09:27 AM | 1 answer(s)

Any update on whether or not this fits the CX30 turbo?

Asked by Scott | 10/28/2021, 03:01 PM | 3 answer(s)

Will these parts for the 2019 all work on the sedan as well?

Asked by Duane | 07/22/2021, 03:30 AM | 1 answer(s)

Any update on whether this will fit the CX-30 Turbo?

Asked by Travis | 06/29/2021, 05:17 AM | 1 answer(s)

Will this work on a 2020 CX-30 I know a lot of the current parts are cross compatible

Asked by Joseph | 03/20/2021, 08:04 AM | 1 answer(s)

Will this work on a 2021 Mazda3 Hatchback Turbo?

Asked by Eric | 01/22/2021, 09:00 AM | 1 answer(s)

When installing this strut bar, do you need to realign your front wheels since you remove the front strut bolts?

Asked by Stephen Cooper | 08/23/2020, 02:17 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits Models

2019+ Mazda 3

2019 Mazda 3
2020 Mazda 3
2021 Mazda 3
2022 Mazda 3
2023 Mazda 3
2024 Mazda 3
2025 Mazda 3

Ed Longo

09/03/2020, 08:46 AM

Comment
I recently purchased this item for my 2019 Mazda 3. Well made first rate product! Easy install. Made a significant difference in chassis stiffness.

Stetson Rydberg

10/16/2021, 09:11 PM

Comment
Completely fixed the issues I’ve been chasing in the handling and stability department with the car. The car no longer wanders under hard braking or emergency braking from high speed. The car also doesn’t feel uncertain in hard corners anymore. I now realize there was a lot of flex in the front end, and the strut bar has really shut it down. If you autocross or push the car hard I’d say this is a must have.
Can’t wait till Corksport releases more suspension tuning for the new turbo 3

Ryan

10/20/2021, 05:20 PM

Comment
Great installation information with really simple directions and pictures to getting this installed. Even has the torque specs as well to get this part locked down tight!

James Petterway

01/20/2022, 05:24 PM

Comment
Extremely easy install. Detailed instructions with pictures are always a plus.

Anirudh Mamtora

04/27/2022, 10:30 AM

Comment
Absolutely changed the feel of the car. Huge cornering confidence boost and increased handling feel. The difference is night and day ! Install was a breeze thanks to the detailed and clear instructions. Second mod from Corksport that I have on my car. Looking to upgrade more areas after this. Kudos to the team at Corksport for yet another high quality product. Couldn’t have been happier.

Charlie D

05/01/2022, 07:43 AM

Comment
NO MORE SEVERE BODY ROLL IN THE FRONT END!!!! Helps significantly with the understeer feeling at high speed tight cornering. Now just need to figure out a sway bar solution, and life will be perfect…. GO BUY THIS!

Jon

06/16/2022, 07:18 AM

Comment
Easy to install, took maybe ten minutes. Looks great and the improvement in handling is noticeable right away. Roll is reduced a lot. This is the only suspension upgrade I have at the moment.

Aaron Maves

09/02/2022, 10:07 AM

Comment
Beautiful piece, and locks the front towers down with zero downside. Can't argue with a simple W

Michael Briggs

08/10/2023, 06:17 PM

Comment
Easy to install made a big difference in the handling it was my first suspension upgrade I also bought the rear sway bar I will install that this weekend I have heard that the two together are perfect but this bar by itself makes a large noticeable difference

Matthew Archer

08/27/2023, 05:06 PM

Comment
Installation was very simple thanks to Corksport's instructions. This high quality strut bar looks great under the hood and improves handling a lot.

← Prev

12

Next →