Mazdaspeed Performance Turbo Inlet Intake Pipe Upgrade

Constructed from 60mm mandrel-bent aluminum with smooth sweeping curves for optimal flow, the CorkSport Mazdaspeed turbo inlet pipe provides a 14% improvement in flow over the restrictive stock turbo inlet pipe.

The CorkSport Advantage:

60mm Mandrel bent aluminum piping: A true high-performance turbocharger inlet pipe that is made from aluminum piping unlike other silicone turbo inlet pipes on the market
Avoid unwanted check engine lights: Designed with a downstream recirculation valve fitting to prevent turbulence backwash around the MAF sensor and avoid unnecessary check engine lights and stumbling
Customize your engine bay:Offered in polished aluminum or powder-coated black with blue, red or black silicone to enhance the look of your engine bay.
14% improvement in flow: Replace the restrictive shape of the OEM inlet pipe to improve and smooth airflow resulting in improved boost levels.
Compatible: Has been re-designed to fit seamlessly with the OEM intake as well as most aftermarket intakes.
Offered With or Without Breather Hose: Optional crankcase breather hose available for turbo vehicles affected by Mazda Service Bulletin #01-002/11 that received a factory fix for turbo smoking due to insufficient crankcase ventilation. This only applies to 2007-2009 Mazdaspeed 3 and CX7 built before July 2008. Click Here to see the whole TSB from Mazda. Page 3 shows a diagram on what to look for to see if your vehicle has had the TSB.
CorkSport Service and Support: Receive a two-year limited warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone support

WARNING:The TIP does not work well with the Injen CAI. Requires custom bracket work to fit properly.

How To Install the Mazdaspeed Turbo Inlet Pipe

It will take you 1-2 hours to install the Mazdaspeed Turbo Inlet Pipe.

2 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Easy sell....

-The factory TIP is a joke.

-CS knows how to get the best performance out of your Mazda. -This TIP is not joke.

-Looks and sounds sexy.

Christopher DeCaro04/21/2014, 01:39 PM

I have a 2010 Speed3 with an Injen CAI, will your turbo inlet pipe work for me? ( no other mods done yet)

anything else I need?

Jon Wright04/14/2014, 10:05 AM

Dear Corksport team,

I have a 09 MS3 with a K&N typhoon air intake system. I would like to install your turbo inlet pipe. Is it fully compatible with my K&N. As I didn't buy it new, I have no idea regarding a service bulletin from Mazda. Do you know if European MS3 had this service bulletin?

Best regards.

Pierre

Schohn Pierre04/04/2014, 07:21 AM

After seeing what Mazda designed as a TIP, which is laughable, this is a welcome addition to my engine and had I known thats how restrictive the stock unit was, I would've done this much sooner (maybe add a pic of the OEM unit to your site).

Quite a noticeable difference in all gears but definitely in 4th going up to 5th when merging onto highways. Still adjusting to the throttle sensitivity in that aspect as the car moves to say the least. You cant beat the price and even as a Canadian, free shipping within the US still works for me.

Overall, another winner from CS. Thanks!

Dave B03/18/2014, 03:40 AM

On my 2012 mazdaspeed 3 will i need to use the tsb pipe or just the standard thank you for your time

Steve Tsiourtsiouris03/05/2014, 06:17 AM

i have a 06 speed6 with a aem cold air intake. will the inlet pipe work with that? and will i get everything i need with it?

Nic Grimm02/18/2014, 04:07 PM

I have a Mazdaspeed6 with a CAI and this TIP was a great improvement over the stock TIP. It is a little difficult to install but with the detailed instructions, it made installation lot easier. Great product Corksport!

Justin Crews02/01/2014, 01:49 PM

I have a 2012 MS3 with a corksport stage 3 CAI...will I be ok installing the turbo inlet pipe? Or do I need to add/remove additional parts?

CorkSport Reply:The TIP will include everything you need.

Danno Nahabedian01/15/2014, 04:02 PM

Corksport,

I have a mazdaspeed 3 with CB-E & CAI could I install the Turbo Inlet pipe before upgrading my Fuel Pump Internals?

CorkSport Reply:Give us a call, 360-260-2675

Eric Nelson01/07/2014, 01:32 PM

How do I know if I need the turbo inlet with the fix or not I'm in sa unable to phone abroad

thanks in advance

CorkSport Reply:Look in the product listing above at the link to the Mazda TSB. Page 3 shows the difference.

Duane01/06/2014, 12:46 AM

← Prev

123 4 5 6 7

Write a review

Is this compatible with the corksport 3 inch short ram intake.

Asked by Chayson | 11/07/2022, 03:22 PM | 1 answer(s)

I have a bone stock 2007 MS3, apart from the ventilation update from Mazda. If I swapped my stock TIP with this one, would I require a tune? Would this constitute as an OEM replacement? Thanks!

Asked by Mike | 07/27/2022, 12:41 PM | 1 answer(s)

I may have missed it somewhere, but how many inches is this?

Asked by Charles | 07/16/2021, 07:58 AM | 1 answer(s)

If I have a 07 speed3 with a CSt4 turbo, will I need the valve concerning the recall?

Asked by Dallas Kennedy | 11/12/2020, 07:23 AM | 1 answer(s)

Will this inlet fit a bnrs2 turbo upgrade?

Asked by Telly | 10/02/2020, 12:49 PM | 1 answer(s)

Will this fit if I have a stage 2 short ram intake?

Asked by David Urquiza | 04/01/2020, 07:34 PM | 1 answer(s)

Will this TIP work with the Fujita CAI Part Number: CA-2508 from Street Unit? Thanks.

Asked by David | 10/21/2019, 08:31 PM | 1 answer(s)

I have cs cat back and sri do i need tune or hpfp to add this tip?

Asked by Mark | 07/15/2019, 09:59 PM | 1 answer(s)

Hola Mi Mazda 6 mps es del año 2007, no tiene ninguna modificación. Esta pieza es compatible para mí coche? Gracias

Asked by Juan | 12/10/2018, 10:59 AM | 1 answer(s)

Does this piece work with the HPS SRI?

Asked by Mike | 08/05/2018, 08:36 AM | 1 answer(s)

I want to run stock k04 with the 3.5" corksport power series ms3 intake - should I also install the corksport TIP or does the 3.5" intake not require a stock/aftermarket TIP?

Asked by Justin Bowen | 06/08/2018, 01:52 PM | 1 answer(s)

I have the head of the cork sport 76mm with filter someone stole my TIP out of my garage. Is this the same TIP I need to have everything again?

Asked by Jose | 08/17/2017, 06:33 PM | 1 answer(s)

Will it fit a DC sports cai?

Asked by Dave | 09/06/2017, 10:33 PM | 1 answer(s)

Planning on installing the bnr s4 turbo in my gen2 will this TIP work with the bnr s4

Asked by Moises | 01/19/2017, 10:15 PM | 1 answer(s)

I have a Cobb CAI, I really want your turbo inlet pipe because of the fact it is aluminum(Better quality), Cheaper Will this fit up with their Intake. I know your parts aren't made to fit there's, Just curious..

Asked by Josh | 04/14/2016, 03:58 PM | 1 answer(s)

I have a 2010 with a SURE SRI. Will this for?

Asked by Nick | 05/31/2016, 06:35 AM | 1 answer(s)

Really want this TIP, Will it Match up will Cobb SRI? This product is much better quality.

Asked by Josh | 04/14/2016, 04:32 PM | 0 answer(s)

If I install the TIP and sylicon elbo, would I pass Ca. Emissions test?

Asked by Neil Brosious | 03/03/2016, 09:04 AM | 1 answer(s)

Back in 12/2014 someone asked if this TIP was compatible with a K&N SRI, you responded by noting that you had not tried it yet. I was wondering if you had any new info.

Asked by Tyson Williams | 01/29/2016, 06:51 AM | 1 answer(s)

I have a 2006 Mazdaspeed 6 with upgraded hpfp, bov. catback exhaust, cobb ap, and CP-E cai. Will this tip be compatible with my CP-E cai?

Asked by Cody | 11/14/2015, 09:23 PM | 1 answer(s)

I was considering between this and the Cobb tuning TIP as I have a Cobb accessport. The accessport only notes "approved" intakes but it really doesn't say anything about TIP/TIH , TMIC, Exhausts etc. The Cobb tuning TIP is significantly more expensive than your product. That being said, is there a difference in air flow or do your products perform the same? Also is there any additional installation needed if I currently have the mazdaspeed CAI installed on my vehicle?

Asked by Jimmy | 11/10/2015, 09:12 PM | 1 answer(s)

So I want to use this TIP with the stock air box on the speed3. Does this TIP come with the silicone intake elbow to connect it to the air box, or would I have to purchase that part separately?

Asked by Dave | 09/30/2015, 02:38 AM | 1 answer(s)

I just bought a BOV and a SRI from you guys. I wanted to know do I have to upgrade my fuel pump before I get this inlet pipe? Thanks

Asked by Lee Louisville | 09/08/2015, 05:38 AM | 1 answer(s)

I want to purchase this inlet pipe but I want to make sure there will be no issues or ad ons I need. Can I install the inlet pipe even with a cp-e cold air intake. Just bolt on and done?

Asked by Jjabaj | 09/08/2015, 05:36 AM | 1 answer(s)

Will this fit a gen1 and a gen2 MS3 without issues?

Asked by Jeff | 07/29/2015, 09:51 AM | 1 answer(s)

Will this fit an AEM Cold air intake?

Asked by Angelo Cotoni | 07/16/2015, 10:52 AM | 1 answer(s)

Will the turbo spool sound be more prominent if I install this tip with the stock air filter box?

Asked by Dave | 06/20/2015, 10:34 PM | 1 answer(s)

Would i need a tune for this and the stage 1 short ram intake?

Asked by Stephen Duran | 06/18/2015, 06:14 AM | 1 answer(s)

So I currently have the injen CAI installed and I need to upgrade my TIP. How much work am I looking at with having to mod the mounting plate for proper installation? Do you have any tips or pictures of how it can be modded?

Asked by Jeffrey | 03/31/2015, 02:45 PM | 1 answer(s)

I have a long ram cool air intake,will your TIP,fit without any problemscscart_) thanxx

Asked by ihave a long ram intake,will urTIP fit without any problem? | 03/29/2015, 02:13 PM | 1 answer(s)

I've the SRI and just installed the TIP, but i have the impression that the intake sits a little lower than the stock TIP... Or i just installed wrong?

Asked by Edgar | 02/22/2015, 09:25 AM | 1 answer(s)

I have the stage 1 corksport SRI. Will the TIP work well without any other upgrades, including the stage 2 intake?

Asked by Chris | 02/05/2015, 07:25 AM | 1 answer(s)

Will the cs tip work with a CPe SRI ?

Asked by PJ Wallington | 02/01/2015, 06:14 PM | 1 answer(s)

I have installed the TIP and my car is now idling roughly and vibrates the car... I assume there is a vacuum leak somewhere, any insight? Scares me that my turbo is getting damaged from an air leak.

Asked by Dustin | 01/02/2015, 08:18 PM | 1 answer(s)

I saw the cai could add a tip for $70 but I believe that's silicone. How good is this power series compared to the silicone? What's the major differences

Asked by Derrick | 01/01/2015, 09:12 AM | 1 answer(s)