Mazdaspeed Performance Turbo Inlet Intake Pipe Upgrade

Constructed from 60mm mandrel-bent aluminum with smooth sweeping curves for optimal flow, the CorkSport Mazdaspeed turbo inlet pipe provides a 14% improvement in flow over the restrictive stock turbo inlet pipe.

The turboinlet pipe is an easy power increase for your Mazdaspeed

The CorkSport Advantage:

60mm Mandrel bent aluminum piping: A true high-performance turbocharger inlet pipe that is made from aluminum piping unlike other silicone turbo inlet pipes on the market
Avoid unwanted check engine lights: Designed with a downstream recirculation valve fitting to prevent turbulence backwash around the MAF sensor and avoid unnecessary check engine lights and stumbling
Customize your engine bay:Offered in polished aluminum or powder-coated black with blue, red or black silicone to enhance the look of your engine bay.
14% improvement in flow: Replace the restrictive shape of the OEM inlet pipe to improve and smooth airflow resulting in improved boost levels.
Compatible: Has been re-designed to fit seamlessly with the OEM intake as well as most aftermarket intakes.
Offered With or Without Breather Hose: Optional crankcase breather hose available for turbo vehicles affected by Mazda Service Bulletin #01-002/11 that received a factory fix for turbo smoking due to insufficient crankcase ventilation. This only applies to 2007-2009 Mazdaspeed 3 and CX7 built before July 2008. Click Here to see the whole TSB from Mazda. Page 3 shows a diagram on what to look for to see if your vehicle has had the TSB.
CorkSport Service and Support: Receive a two-year limited warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone support

WARNING:The TIP does not work well with the Injen CAI. Requires custom bracket work to fit properly.

How To Install the Mazdaspeed Turbo Inlet Pipe

It will take you 1-2 hours to install the Mazdaspeed Turbo Inlet Pipe.

2 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits Models

2007-2013 Mazdaspeed 3

2007 Mazdaspeed 3
2008 Mazdaspeed 3
2009 Mazdaspeed 3
2010 Mazdaspeed 3
2011 Mazdaspeed 3
2012 Mazdaspeed 3
2013 Mazdaspeed 3

2006-2007 Mazdaspeed 6

2006 Mazdaspeed 6
2007 Mazdaspeed 6

2007-2012 Mazda CX-7

2006 Mazda CX-7
2007 Mazda CX-7
2008 Mazda CX-7
2009 Mazda CX-7
2010 Mazda CX-7
2011 Mazda CX-7
2012 Mazda CX-7

Marius HOLLAND

01/21/2013, 03:03 PM

Comment
I want to buy this item, but I also have the Injen Air Intake...Cody! What do you mean with Awkward Fitment!? Does it fit or not!?

CorkSport Reply:It will work fine with the Injen intake.

Carlos, Las Vegas, NV

12/11/2012, 11:11 PM

Comment
I just installed a turbo inlet pipe and a short shifter plate on my 2012 MS3 and wow!!! What a huge difference, throttle response is way better than I was expecting and the shift plate makes the throw between gears effortless. Easy install with the instructions provided. Totally worth every dollar and more!!! Definitely will be more purchases with Corksport in my future

Cody

10/03/2012, 04:35 PM

Comment
Excellent upgrade over stock. Noticeable difference in sound and throttle response. However, made for an awkward fitment with my Injen SRI.

Coleby Thomas

07/14/2012, 09:03 AM

Comment
Built quality is beautiful. black finish is very good looking. have not put it on yet but i will after i get the rest of the stuff i ordered.

miguel viau

04/26/2012, 06:08 PM

Comment
im getting it soon! after hearing the reviews i cant wait to get it!

Ben

04/04/2012, 01:04 PM

Comment
Easy Instalation, took about an hour and a half. I also added some heat reflective material to mine and seems to keep heat soak and radiance to a minimum. All in all a great product that I have already noticed efficiecy differences from. The car spools much more smoothly now.

CPE CAI, Corksport TIP and it fits great!

Scott

02/18/2012, 10:49 AM

Comment
I added mine today and it took less than 2 hours. Not bad at all. So far the car feels much livelier. All ready had a CAI, but it adds a bit more.

Gary

02/16/2012, 05:35 PM

Comment
took about an hour to install, only trouble was getting around the wiring harnesses in the engine bay. turbo spools, holds boost and sounds way better. looks great in all black, very satisfied.

Maxime Lavoie-Gauvreau

10/25/2011, 07:54 PM

Comment
1hours and quarter to install, after the installation I take a ride and my cars sound like a jet combined with CAI. powder coat is very nice, good sound, Great product!

CoryT

09/26/2011, 02:37 PM

Comment
The welds inside the pipe left much to be desired, however it fit fine, powdercoat is good and gives the intake a nice sound. Make the stock TIP look like a pancake.

← Prev

1 2 3 4 567

Next →

CODE	Vent Breather Hose	Pipe Finish	Silicone Color	Clamp Color	Availability	Price
Gen-6-463-13001	No - Standard	Powder Coated Black	Blue	Polished	In stock	$159.99	Select options
Gen-6-462-11001	Yes - Received Mazda Service Bulletin Fix 01-002/11	Powder Coated Black	Black	Polished	In stock	$159.99	Select options
Gen-6-462-12000	Yes - Received Mazda Service Bulletin Fix 01-002/11	Polished	Red	Polished	In stock	$159.99	Select options
Gen-6-462-12001	Yes - Received Mazda Service Bulletin Fix 01-002/11	Powder Coated Black	Red	Polished	In stock	$159.99	Select options
Gen-6-462-13000	Yes - Received Mazda Service Bulletin Fix 01-002/11	Polished	Blue	Polished	In stock	$159.99	Select options
Gen-6-462-13001	Yes - Received Mazda Service Bulletin Fix 01-002/11	Powder Coated Black	Blue	Polished	In stock	$159.99	Select options
Gen-6-463-11001	No - Standard	Powder Coated Black	Black	Polished	In stock	$159.99	Select options
Gen-6-463-12000	No - Standard	Polished	Red	Polished	In stock	$159.99	Select options
Gen-6-463-12001	No - Standard	Powder Coated Black	Red	Polished	In stock	$159.99	Select options
Gen-6-463-13000	No - Standard	Polished	Blue	Polished	In stock	$159.99	Select options
Gen-6-462-11000	Yes - Received Mazda Service Bulletin Fix 01-002/11	Polished	Black	Polished	In stock	$159.99	Select options
Gen-6-463-11000	No - Standard	Polished	Black	Polished	In stock	$159.99	Select options

HRS

HRS

Shipping Estimator Shipping Estimator

Mazdaspeed Turbo Inlet Pipe

Mazdaspeed Performance Turbo Inlet Intake Pipe Upgrade

How To Install the Mazdaspeed Turbo Inlet Pipe

Fits Models

Recommended Products Recommended Products

About CorkSport

Shopping

Connect

Social links

SPONSORSHIP