Mazdaspeed Performance Turbo Inlet Intake Pipe Upgrade

Constructed from 60mm mandrel-bent aluminum with smooth sweeping curves for optimal flow, the CorkSport Mazdaspeed turbo inlet pipe provides a 14% improvement in flow over the restrictive stock turbo inlet pipe.

The turboinlet pipe is an easy power increase for your Mazdaspeed

The CorkSport Advantage:

60mm Mandrel bent aluminum piping: A true high-performance turbocharger inlet pipe that is made from aluminum piping unlike other silicone turbo inlet pipes on the market
Avoid unwanted check engine lights: Designed with a downstream recirculation valve fitting to prevent turbulence backwash around the MAF sensor and avoid unnecessary check engine lights and stumbling
Customize your engine bay:Offered in polished aluminum or powder-coated black with blue, red or black silicone to enhance the look of your engine bay.
14% improvement in flow: Replace the restrictive shape of the OEM inlet pipe to improve and smooth airflow resulting in improved boost levels.
Compatible: Has been re-designed to fit seamlessly with the OEM intake as well as most aftermarket intakes.
Offered With or Without Breather Hose: Optional crankcase breather hose available for turbo vehicles affected by Mazda Service Bulletin #01-002/11 that received a factory fix for turbo smoking due to insufficient crankcase ventilation. This only applies to 2007-2009 Mazdaspeed 3 and CX7 built before July 2008. Click Here to see the whole TSB from Mazda. Page 3 shows a diagram on what to look for to see if your vehicle has had the TSB.
CorkSport Service and Support: Receive a two-year limited warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone support

WARNING:The TIP does not work well with the Injen CAI. Requires custom bracket work to fit properly.

How To Install the Mazdaspeed Turbo Inlet Pipe

It will take you 1-2 hours to install the Mazdaspeed Turbo Inlet Pipe.

2 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

How do I know if I need the turbo inlet with the fix or not I'm in sa unable to phone abroad

thanks in advance

CorkSport Reply:Look in the product listing above at the link to the Mazda TSB. Page 3 shows the difference.

Duane01/06/2014, 12:46 AM

I have a mazdaspeed cai would this inlet work with that? All the hook ups?

CorkSport Reply:Yes.

David01/05/2014, 07:51 PM

Will this work with the HKS RS intake you guys also sell?

CorkSport Reply:Yes it will.

Bobby T01/02/2014, 06:29 PM

I have a Cobb SRI i know will this fit in my gen1 engine bay and my cobb SRI, so i have to remove anything else such as the battery case?

CorkSport Reply:The TIP fits with the stock ECU and battery box.

Xavier12/31/2013, 06:32 PM

I have an '07 MS3 with a Sure SRI. I bought car used a few years back and do not know if i received a service bulletin. How would I know if I need to order the TIP with the fix?

Thank you,

CorkSport Reply:Call us.

Robert12/07/2013, 05:06 PM

do I need the vent breather hose with my gen 2?

Samuel Walton10/21/2013, 08:58 AM

do I need the vent breather hose with my gen 2?

CorkSport Reply:No.

Samuel Walton10/21/2013, 08:58 AM

i have a 2007 mazda speed 3 with a cpe cold air do i need a breather.

CorkSport Reply: Contact our sales staff at 360-260-2675

Leo10/16/2013, 03:15 PM

Do you offer anything for a 3in turbo inlet or just the stock 2 in?

CorkSport Rreply:We currently just offer the 2.25 ID version.

Jeremy10/08/2013, 12:01 PM

I have a 2011 ms3 with K & N typhoon sri will this tip fit and do I need the breather hose?

CorkSport Reply: You will not need the breather fitting.

Ryan Bolin09/30/2013, 08:05 AM

← Prev

1 234 5 6 7

Next →

Write a review

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits Models

2007-2013 Mazdaspeed 3

2007 Mazdaspeed 3
2008 Mazdaspeed 3
2009 Mazdaspeed 3
2010 Mazdaspeed 3
2011 Mazdaspeed 3
2012 Mazdaspeed 3
2013 Mazdaspeed 3

2006-2007 Mazdaspeed 6

2006 Mazdaspeed 6
2007 Mazdaspeed 6

2007-2012 Mazda CX-7

2006 Mazda CX-7
2007 Mazda CX-7
2008 Mazda CX-7
2009 Mazda CX-7
2010 Mazda CX-7
2011 Mazda CX-7
2012 Mazda CX-7

duane

01/06/2014, 12:46 AM

Comment
How do I know if I need the turbo inlet with the fix or not I'm in sa unable to phone abroad

thanks in advance

CorkSport Reply:Look in the product listing above at the link to the Mazda TSB. Page 3 shows the difference.

David

01/05/2014, 07:51 PM

Comment
I have a mazdaspeed cai would this inlet work with that? All the hook ups?

CorkSport Reply:Yes.

Bobby T

01/02/2014, 06:29 PM

Comment
Will this work with the HKS RS intake you guys also sell?

CorkSport Reply:Yes it will.

xavier

12/31/2013, 06:32 PM

Comment
I have a Cobb SRI i know will this fit in my gen1 engine bay and my cobb SRI, so i have to remove anything else such as the battery case?

CorkSport Reply:The TIP fits with the stock ECU and battery box.

Robert

12/07/2013, 05:06 PM

Comment
I have an '07 MS3 with a Sure SRI. I bought car used a few years back and do not know if i received a service bulletin. How would I know if I need to order the TIP with the fix?

Thank you,

CorkSport Reply:Call us.

Samuel Walton

10/21/2013, 08:58 AM

Comment
do I need the vent breather hose with my gen 2?

Samuel Walton

10/21/2013, 08:58 AM

Comment
do I need the vent breather hose with my gen 2?

CorkSport Reply:No.

leo

10/16/2013, 03:15 PM

Comment
i have a 2007 mazda speed 3 with a cpe cold air do i need a breather.

CorkSport Reply: Contact our sales staff at 360-260-2675

Jeremy

10/08/2013, 12:01 PM

Comment
Do you offer anything for a 3in turbo inlet or just the stock 2 in?

CorkSport Rreply:We currently just offer the 2.25 ID version.

Ryan Bolin

09/30/2013, 08:05 AM

Comment
I have a 2011 ms3 with K & N typhoon sri will this tip fit and do I need the breather hose?

CorkSport Reply: You will not need the breather fitting.

← Prev

1 234 5 6 7

Next →

CODE	Vent Breather Hose	Pipe Finish	Silicone Color	Clamp Color	Availability	Price
Gen-6-463-13001	No - Standard	Powder Coated Black	Blue	Polished	In stock	$159.99	Select options
Gen-6-462-11001	Yes - Received Mazda Service Bulletin Fix 01-002/11	Powder Coated Black	Black	Polished	In stock	$159.99	Select options
Gen-6-462-12000	Yes - Received Mazda Service Bulletin Fix 01-002/11	Polished	Red	Polished	In stock	$159.99	Select options
Gen-6-462-12001	Yes - Received Mazda Service Bulletin Fix 01-002/11	Powder Coated Black	Red	Polished	In stock	$159.99	Select options
Gen-6-462-13000	Yes - Received Mazda Service Bulletin Fix 01-002/11	Polished	Blue	Polished	In stock	$159.99	Select options
Gen-6-462-13001	Yes - Received Mazda Service Bulletin Fix 01-002/11	Powder Coated Black	Blue	Polished	In stock	$159.99	Select options
Gen-6-463-11001	No - Standard	Powder Coated Black	Black	Polished	In stock	$159.99	Select options
Gen-6-463-12000	No - Standard	Polished	Red	Polished	In stock	$159.99	Select options
Gen-6-463-12001	No - Standard	Powder Coated Black	Red	Polished	In stock	$159.99	Select options
Gen-6-463-13000	No - Standard	Polished	Blue	Polished	In stock	$159.99	Select options
Gen-6-462-11000	Yes - Received Mazda Service Bulletin Fix 01-002/11	Polished	Black	Polished	In stock	$159.99	Select options
Gen-6-463-11000	No - Standard	Polished	Black	Polished	In stock	$159.99	Select options

HRS

HRS

Shipping Estimator Shipping Estimator

Mazdaspeed Turbo Inlet Pipe

Mazdaspeed Performance Turbo Inlet Intake Pipe Upgrade

How To Install the Mazdaspeed Turbo Inlet Pipe

Fits Models

Recommended Products Recommended Products

About CorkSport

Shopping

Connect

Social links

SPONSORSHIP