Mazdaspeed High Flow Fuel Pump Internals | CorkSport Mazda

HPFP for Mazdaspeed

Mazdaspeed 3 High-Pressure Fuel Pump (HPFP) Internals for both the Mazdaspeed3 and Mazdaspeed 6 took over 2 years of research and development to bring innovation you can count on in your Speed3 and Speed6. The CorkSport Max Flow Fuel Pump Internals have the best in market hardening surface treatments, high strength coatings, and a machined tolerance. Our Mazdaspeed HPFP Internals will give you the most performance available for your dollar. We make these fuel pumps with precision machining methods, we then treat the surface and coat it for strength, and finally machine the internals again for a perfect fit that provides your Mazdaspeed ultra-high efficiency. Real world application will allow for a greater horsepower capability, safer air/fuel ratios, and never need to worry about fuel supply in your Mazda.

PRODUCT FEATURE	OEM	APR/CP-E	KMD	AutoTech
OEM Spring Keeper
Upgraded Spring	-
Piston Size	- 8.0	9.5	9.8	9.8	9.8
Octagonal Piston Head
Installation Video (Internals)	-	-
Installation Video (Pump)	-
Install Tool(s)	-	-
Lowest Piston Weight	-
Manufacturer Created Accessport Tuning Maps	-
Serialized		STICKER
Surface Hardening Before Coating	-
Machined After Coating	-
Developed on Mazda MZR

What's In The Box:

Fitment: 2007-2013 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, Mazda CX-7.
Fully Machined Installation Tools Designed to help provide the most trouble free install on the market (the keeper tool even turns into a bottle opener for your keychain).
High Rate Spring A higher rate spring is included in our kit for increased reliability and efficiency.
Designed Specifically for Mazdas The ONLY pump internals on the market designed by a Mazda performance company for the Mazda MZR engine, including Mazdaspeed 3, Mazdaspeed 6 and Turbo CX7.
Precision tolerances and improved efficiency 50% larger than the OEM pump internals for increased fuel volume flow.
Required Hardware Anodized Aluminum Installation Sleeve and Retaining Hardware included.Tough Aluminum Case For storing your factory internals or anything else that is legal.
CorkSport Service and Support: Receive a two year limited warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support.

How To Install Your Mazdaspeed MZR DISI Max Flow Fuel Pump Internals

It will take you two hours to install the CorkSport Mazdaspeed Fuel Pump Internals with our easy-to-use instructions.

2 Hour Install Time

3/5 Difficulty

2-Year Warranty

No CEL

New features

Manufacturer:

CorkSport

I too had my TMIC off during the installation (like Matt G.), and getting to everything was super easy. This was the installation that I worried about the most. But with CS's super instructions and the installation video, this installation was a piece of cake. I installed the CS DP during the same install, and with the 20% increase in fuel flow pressure...I am not worried about running out of fuel at WOT!

Steve Kizer 06/16/2014, 11:22 AM

I have ordered a few parts from Corksport already for my car. When it came time to get the fuel pump internals i didnt think to go anywhere else. Came here right away. They make a great product!!!! Cant wait to get them in and get going.

Danny Garofalo 06/12/2014, 02:45 PM

Can you put this on a 2013 Mazda 3 Skyactiv? And what would happened if you do?

Check out the FAQ tab for this part for an answer.

Cliff 05/30/2014, 06:47 PM

Changing pump internals was pretty uneventful due to good documentation and kitted parts. Hardest part was getting to the pump which just requires some time and tinkering. My stock pump held up pretty well with stage 1 mods but looking forward to stage 2 mods while holding steady at 1670 psi. I've accumulated about 1K miles on the mod and it's running perfect.

Phil Herbert 05/20/2014, 07:46 PM

This item came very well presented. Instruction for install was very thorough and installation was a piece of cake.

Only recommendation is to remove the injector fuse and run the car till it shuts down itself before install. This way you won't have any pressure built up in the high pressure line and will not get sprayed with fuel.

After installation, the difference can be noticed straight away. Much smoother run and maintains plenty of consistent pressure.

Very happy with this product! A must have for all MS3! As always, a quality product from Corksport! Thanks!

Ken W 05/19/2014, 07:06 AM

Wow! I almost didn't want to take it out of the cool-looking black box, but here's my review...

Shipping and Packaging: A+

Shipping was fast as usual with, and I had this sweet setup in my hands within a couple days from ordering (figure VC to Chicago where I'm at). The shipment packaging was as expected: the cool box containing the good was wrapped in bubble tape and then nested in ruffled brown paper. That aside... holy crap that little black metal box containing the goods made me feel like I was opening up something out of National Treasure! CorkSport really didn't have to go to these lengths, but they did.

Quality: A+

Again with the great presentation. The internals come in a beautiful black metal box, components are stamped with serial numbers and vacuum sealed in plastic, it comes with a higher-grade spring, AND installation tools. Oh, and CS was nice enough to include an 8Gb flash stick with the instructions. You can then use the flash stick for anything! This beats the hell out of competitors on so many levels.

Installation Difficulty: 4 out of 10

This isn't really a hard install, but you MUST take your time! I was sweating this install for quite some time, but the CS instructions (I have some suggestions) and YouTube videos showing the step-by-step install made it a breeze. Take your sweet time, and seriously clean your hands when dealing with the actual internals. DO NOT force the internals piston into place. If the fitting is rigid and sticks, lube it with more clean oil. DO NOT force the HPFP assembly back into its seat! You might find that the lower line catches it. You will need to push it down so that you can properly jiggle the assembly into place. I had to take the assembly out because of the lower line pushing up against the assembly. You need to keep on playing with it.

NOTE: I did remove the TMIC for the installation. It seems like it really isn't needed (shroud only), but I did, and found that it gave more access to the HPFP assembly. You don't need to remove the battery.

Performance:

You should really own an Cobb AP, in my opinion. I logged the HPFP before and after the internals installation. The peak on stock internals was 1720 psi at WOT, while CorkSport internals created 2098 psi on the same tune selection.

RECOMMENDATION to CorkSport:

Please add instructions to pull the electrical fuel pump fuse to relieve pressure. Pull the LPFP relay, turn the car on, and then it idle until it dies. There is no need for pressure sprays of gasoline all over the engine. I did this for the installation, and it worked.

Matthew Guevara 05/13/2014, 11:59 PM

Hey guys just a quick note to say the Max Flow Pump Internals were fantastic. Installed over the weekend, instructions were precise the only difficult part was the high pressure line and pushing the pump back against the spring. But this is largely due to my poor mechanical skills.

Purchased via Jase from New Zealand :)

Ken 05/11/2014, 10:01 PM

As some others have stated the packaging had me in awe after I openend the box. The quality seems top notch and went in easy as pie! Holding 1800-1900 PSI on stage 2 with no issues so far. As a side note, the tappet came pre installed so you can skip that step!

Vlad D 05/05/2014, 09:18 AM

Have had these and the racepipe installed now for couple weeks and I love them no complaints 2000 wot psi levels and 1800 steady flow no problem. downpipe going in today.

Ryan Baumgartner 05/01/2014, 08:26 AM

The packaging of this product blew my mind, no other company provides this level of craftsmanship combined with the feeling of purchasing an exclusive product. The white paper sold me on this product and i am happy i purchased. I hit psi levels over 2000 at WOT, but more importantly it is flowing more volume than stock. Install was easy and the pump makes less noise than the stock one. You do not need to be a master mechanic to do this job yourself.

Tyler Tersigni 04/22/2014, 01:33 PM

← Prev

1 2 3 4 5 6 7 8 9 10

Write a review

I installed this on my 11 Mazdaspeed3 and for some reason the car goes now rich, STFT is always -7 to -12.50, Replaced Maf, inspected MAf wiring, claps, TB gasket replaced, replaced TMIC with CS TMIC, stock intake/Inlet tried Silicone Inlet+ Custom Intake. When i removed and installed the OEM one values were back to normal, does this need any kind of tune?

Asked by Cesar Castle | 11/09/2024, 07:37 AM | 0 answer(s)

should I get the MPS HPFP internals from COBB or CorkSport? what are the differences? is the CorkSport HPFP compatible with the COBB accessport?

Asked by Eddie Arteaga | 10/08/2024, 08:44 AM | 1 answer(s)

Is there a way to order just a piston and tappet or do I need to order whole new set of internals?

Asked by Emma | 09/24/2024, 07:25 AM | 1 answer(s)

i bought a used 2008 mazdaspeed with the corksport hpfp internals already done as of late ive had to order a new oe fuel pump to replace it. can i reuse the hardware i have here and order rebuild kit or do i need new internals.

Asked by rafael reyes | 08/30/2024, 10:46 AM | 1 answer(s)

ive been doing some reasearch here and there, checking forums and all that but i cant seem to find a direct answer. If i buy this hpfp will i need to pair it with some bigger injctors ?

Asked by tristan | 01/04/2024, 03:40 PM | 1 answer(s)

Does it come with a warranty?

Asked by Nery Martinez | 07/11/2024, 06:51 PM | 1 answer(s)

Will this work with a CX30, and if not is there a model meant for those specifically? Thank you!

Asked by Eric Andersen | 04/07/2023, 06:06 AM | 1 answer(s)

Will installing your hpfp internals make it so my car wont pass smog?

Asked by Kaden Shah-Welch | 09/23/2021, 12:25 PM | 1 answer(s)

Just purchased a 2010 Mazdaspeed3 with 135,000 miles on it. The car came with a Cobb SRI, but everything else is stock. The next step is to install high pressure fuel pump internals. Will replacing the internals on a high mileage car be fine with the existing fuel pump or should I replace the whole fuel pump and place the high flow internals in a new high pressure fuel pump?

Asked by Carlos Sierra | 11/27/2020, 06:57 PM | 1 answer(s)

I have a fully stock 2010 speed 3 just lowered it and i need more engine upgrades so will i need a new MAF or tune when i install this?

Asked by tim soucie | 11/08/2020, 03:31 PM | 1 answer(s)

My current stock hpfp is ticking, will this also fix my hpfp or should I get a new one first and then buy this kit?

Asked by Youri l. | 06/09/2020, 01:16 PM | 0 answer(s)

First mod of many; can I have my local mechanic do the install?

Asked by Jarvis | 10/22/2019, 03:59 PM | 1 answer(s)

That will work for Mazda 3 2013 2.5 auto trans (non skyactiv)

Asked by Juan | 08/31/2019, 06:49 AM | 1 answer(s)

I went to install these internals and noticed that the little O-ring that the piston passes through had degraded in my stock pump. Any ideas short of buying a new pump would be greatly appreciated?!?

Asked by Tom | 06/19/2019, 07:49 PM | 1 answer(s)

My HPFP makes a loud clicking at the lightest touch of throttle between 2000-3000rpm. I've had CS internals in the hpfp for about 4 years. I replaced the fuel relief valve and even put in new CS HPFP internals and the problem persists. Does anyone on your team know the issue I'm experiencing and how to resolve it?

Asked by Evan | 05/11/2019, 07:25 PM | 3 answer(s)

I have a 2006 Mazdaspeed 6 and there is a Service Bulletin 01-022/08 for engine too lean at idle (P2187) will the fuel pump kit fix the weak fuel pressure at low idle?

Asked by Brad | 10/07/2017, 10:38 AM | 1 answer(s)

can i run a sri and cbe with the stock tune?

Asked by Keni | 07/07/2016, 03:46 AM | 1 answer(s)

I have the stage 2 intake and rmm insert, I don't WOT, go to tracks or race, I just use my car as a dd and I just bought the intake because I read that it would help me save on my mpg. Do I really need to upgrade my HPFP? Thank you

Asked by paul | 06/29/2016, 01:18 PM | 1 answer(s)

I upgraded my pump internals with the CS high flow fuel pump internals. I'ts possible revert the pump internals to stock, with the same stock internals removed?

Asked by Alejandro | 12/16/2016, 04:13 PM | 0 answer(s)

Is this compatible with gen 2 (2009~2013) speed 3?

Asked by cheez | 08/24/2016, 05:54 AM | 1 answer(s)

How much does this effect the fuel mileage?

Asked by Jeff | 05/16/2016, 09:00 PM | 3 answer(s)

I'm assuming that with the tappet already mated to the collar there is no further seating required? This is the only step in the process that differs from the instructions.

Asked by Jeff Magill | 04/30/2016, 02:12 PM | 1 answer(s)

I'm running stage 2 intake, boost tubes, and race pipe. Would I be safe for awhile while running theses mods. Still saving for the fuel pump

Asked by Tarango | 03/27/2016, 08:03 PM | 1 answer(s)

Can I run a stage 1 map on my 2013 mazdaspeed 3? Mods: corksport sri w/TIP, corksport cbe.

Asked by Eden Cerna | 03/21/2016, 12:26 PM | 1 answer(s)

My internals came with the tappet already mated to the collar. Is any further seating needed or just slip on? Sorry if this shows up twice, I got a send error the first time.

Asked by Jeff Magill | 04/30/2016, 02:18 PM | 0 answer(s)

Can you do an ots with the stock do pipe

Asked by George | 02/25/2016, 10:36 AM | 1 answer(s)

I've been told this should be the first upgrade to my ms6 before anything, true? I already have exhaust and short ram intake.

Asked by Ryan foley | 01/26/2016, 06:35 PM | 1 answer(s)

I feel like im beating a dead horse here but do you need any specific map to run this HPFP?

Asked by Jacob Pepel | 12/30/2015, 04:46 PM | 1 answer(s)

Is there any sort of break in period needed or recommended after the installing of this pump?

Asked by ANDY | 12/04/2015, 09:28 AM | 1 answer(s)

I bought and installed the HPFP and my relief valve blew. Im buying a new relief valve and need to know what the peak pressure the pump will make so buy the correct relief valve. Thank you in advance P.S do you have any advice on the relief valve?

Asked by Andrew | 10/28/2015, 09:30 PM | 1 answer(s)

Hello, I installed the corksport internal in a brand new hitachi pump in my gti mk5 fsi engine 2008. The stock pump works perfectly fine, however with the corksport internals the car would have difficulty to start, like if the pump is not primed, and when the car does start the ecu throw the code p2293 Fuel Pressure Regulator 2 Performance code, and the car appears to be a limp mode. No boost no power. Apparently the car is experiencing fuel starvation. When I put back the stock internal in the pump, everything is normal. Any suggestion? Should I try with the stock spring?

Asked by Laurent | 10/12/2015, 10:12 AM | 1 answer(s)

At wot sometimes cuts my fuel like a fuel cut would I need internals?

Asked by zack | 10/02/2015, 06:24 AM | 1 answer(s)

Wat advantage does this have over an entire hig pressure fuel pump? Stock Speed6

Asked by Gio | 07/06/2015, 08:30 AM | 1 answer(s)

this works for mazdaspeed3 2007-13 correct?

Asked by Joe | 06/15/2015, 11:07 AM | 1 answer(s)

Would this work with a 2014 Mazda 3?

Asked by Space | 06/09/2015, 04:28 PM | 1 answer(s)

These will work on a 2010+ ms3 right?

Asked by Isaah | 06/02/2015, 06:34 AM | 1 answer(s)

What should my fuel pressure be at wot/cruise/idle. Im running stock internals with stage 3 corksport cai and inlet pipe. Also running the cobb stage 1 91 cs cai+inlet. Running 1700 at WOT. I need to upgrade just gotta save up. Am I safe or should I down the map to safe mode?

Asked by Derrick | 04/30/2015, 10:09 PM | 1 answer(s)

Would this also fit the fuel pump in a VW/Audi FSI engine?

Asked by Paco | 02/28/2015, 10:37 AM | 1 answer(s)

Do you need an accessport for any changes after install, or is that optional tuning.

Asked by Mike | 01/22/2015, 06:01 AM | 1 answer(s)

Does this work with 2012 Mazda 3 2.0?

Asked by Adam | 11/18/2014, 03:07 PM | 1 answer(s)

After install the internal, do I need to avoid driving full throttle?

Asked by Jae Il Hwang Park | 11/02/2014, 11:25 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits:
2007-2009 Mazdaspeed 3
2010-2013 Mazdaspeed 3
2007-2012 Cx7 Turbo
2006-2007 Mazdaspeed 6
2007-2009 Mazda 3 MPS
2010-2013 Mazda 3 MPS
2005-2007 Mazda 6 MPS