Shipping Estimator Shipping Estimator

Mazdaspeed High Pressure Fuel Pump Internals

 
Price: $349.99
Price in points:  What are Points? 350 points
Gen-6-999-10
+
Add to wish list

HPFP for Mazdaspeed

Mazdaspeed 3 High-Pressure Fuel Pump (HPFP) Internals for both the Mazdaspeed3 and Mazdaspeed 6 took over 2 years of research and development to bring innovation you can count on in your Speed3 and Speed6. The CorkSport Max Flow Fuel Pump Internals have the best in market hardening surface treatments, high strength coatings, and a machined tolerance. Our Mazdaspeed HPFP Internals will give you the most performance available for your dollar. We make these fuel pumps with precision machining methods, we then treat the surface and coat it for strength, and finally machine the internals again for a perfect fit that provides your Mazdaspeed ultra-high efficiency. Real world application will allow for a greater horsepower capability, safer air/fuel ratios, and never need to worry about fuel supply in your Mazda.


PRODUCT FEATURE OEM APR/CP-E KMD AutoTech Mazdaspeed-3-fuel-pump-upgrade-header
OEM Spring Keeper
Upgraded Spring -
Piston Size - 8.0 9.5 9.8 9.8 9.8
Octagonal Piston Head
Installation Video (Internals) - -
Installation Video (Pump) -
Install Tool(s) - -
Lowest Piston Weight -
Manufacturer Created Accessport Tuning Maps -
Serialized STICKER
Surface Hardening Before Coating -
Machined After Coating -
Developed on Mazda MZR

What's In The Box:

  • Fully Machined Installation Tools Designed to help provide the most trouble free install on the market (the keeper tool even turns into a bottle opener for your keychain).
  • High Rate Spring A higher rate spring is included in our kit for increased reliability and efficiency.
  • Designed Specifically for Mazdas The ONLY pump internals on the market designed by a Mazda performance company for the Mazda MZR engine, including Mazdaspeed 3, Mazdaspeed 6 and Turbo CX7.
  • Precision tolerances and improved efficiency 50% larger than the OEM pump internals for increased fuel volume flow.
  • Required Hardware Anodized Aluminum Installation Sleeve and Retaining Hardware included.Tough Aluminum Case For storing your factory internals or anything else that is legal.
  • CorkSport Service and Support: Receive a two year limited warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support.


Additional Features

How To Install Your Mazdaspeed MZR DISI Max Flow Fuel Pump Internals

It will take you two hours to install the CorkSport Mazdaspeed Fuel Pump Internals with our easy-to-use instructions.

2 Hour Install Time

2 Hour Install Time

Difficulty: 3/5

3/5 Difficulty

2-Year Warranty

2-Year Warranty

No CEL

No CEL

how to install Mazdaspeed 3 high pressure fuel pump internals

New features

Manufacturer:
CorkSport
These parts are a NECESSARY evil on our engines. Buy them from corksport to ensure quality and quick shipping! Was everything I expected and more. I would recommend this upgrade to anyone looking to mod. As in do this first and be smart. They are expensive but well worth it. Not to mention is comes in a nice case (as do most CS products) as well as the tool used to install it functions as a keychain bottle opener. Always love cracking a cold one with my HPFP tool.. because its badass bro. Buy it
Excellent quality, best features on the market, and as always good tech support from the guys had a technical question and they followed up with me right away.
They're the best in the game, can't even compare how dedicated these guys are to other manufacturers. It makes me question why cp-e,cobb, and jbr didn't even make their own fuel pump internals. It's quality every time I purchase something here. They include everything you need and need to know.
Got them in and installed the same day! I didn't have any problems the instructions were on point and only took an hour to install. The price though for what the part really is isn't cool but you need them to keep modding your car and CorkSport did the best. And I noticed the gains instantly.
Easy installation. No issues with fuel pressure dropping out at high rpms. What more can you ask for?
My car performance is awesome with the new internals. Installing the internals is a little more difficult that the instructions or the video show. It is impossible to get to the fuel pump without removing the battery box. Also if you have the Corksport intake system installed, some of it is going to need to be removed. Other than that the install went well, it just takes a little longer than the 2 hours estimate.
Wow! What a product. Have done a lot of research about which internals to buy and everything kept coming back to corksport. Install was a breeze. Took about an hour and 10 minutes. Instructions were in great detail. I work for Mazda and showed our master Mazda tech the new internals and he was very impressed. Especially after I showed him the before and after data logs. Easily pushing over 2000 CFM's at WOT. HIGHLY RECOMMEND these internals over anyone else's. Great job Corksport
Install was simple took longer to get a torque wrench that to install. I was getting a cel for running lean at off idle but now that's gone and the car runs great. Thanks CS
Derek first of all I know Cody thank you for making it Superior product great fuel pump and it's amazing simply amazing great quality performance is unreal thank you for making awesome products
Easy installation, guide was very helpful. Car is running awesome with the new fuel pump.
Write a review

Will installing your hpfp internals make it so my car wont pass smog?

Asked by Kaden Shah-Welch | 09/23/2021, 12:25 PM | 1 answer(s)

Just purchased a 2010 Mazdaspeed3 with 135,000 miles on it. The car came with a Cobb SRI, but everything else is stock. The next step is to install high pressure fuel pump internals. Will replacing the internals on a high mileage car be fine with the existing fuel pump or should I replace the whole fuel pump and place the high flow internals in a new high pressure fuel pump?

Asked by Carlos Sierra | 11/27/2020, 06:57 PM | 1 answer(s)

I have a fully stock 2010 speed 3 just lowered it and i need more engine upgrades so will i need a new MAF or tune when i install this?

Asked by tim soucie | 11/08/2020, 03:31 PM | 1 answer(s)

My current stock hpfp is ticking, will this also fix my hpfp or should I get a new one first and then buy this kit?

Asked by Youri l. | 06/09/2020, 01:16 PM | 0 answer(s)

First mod of many; can I have my local mechanic do the install?

Asked by Jarvis | 10/22/2019, 03:59 PM | 1 answer(s)

That will work for Mazda 3 2013 2.5 auto trans (non skyactiv)

Asked by Juan  | 08/31/2019, 06:49 AM | 1 answer(s)

I went to install these internals and noticed that the little O-ring that the piston passes through had degraded in my stock pump. Any ideas short of buying a new pump would be greatly appreciated?!?

Asked by Tom | 06/19/2019, 07:49 PM | 1 answer(s)

My HPFP makes a loud clicking at the lightest touch of throttle between 2000-3000rpm. I've had CS internals in the hpfp for about 4 years. I replaced the fuel relief valve and even put in new CS HPFP internals and the problem persists. Does anyone on your team know the issue I'm experiencing and how to resolve it?

Asked by Evan | 05/11/2019, 07:25 PM | 3 answer(s)

I have a 2006 Mazdaspeed 6 and there is a Service Bulletin 01-022/08 for engine too lean at idle (P2187) will the fuel pump kit fix the weak fuel pressure at low idle?

Asked by Brad | 10/07/2017, 10:38 AM | 1 answer(s)

can i run a sri and cbe with the stock tune?

Asked by Keni | 07/07/2016, 03:46 AM | 1 answer(s)

I have the stage 2 intake and rmm insert, I don't WOT, go to tracks or race, I just use my car as a dd and I just bought the intake because I read that it would help me save on my mpg. Do I really need to upgrade my HPFP? Thank you

Asked by paul | 06/29/2016, 01:18 PM | 1 answer(s)

I upgraded my pump internals with the CS high flow fuel pump internals. I'ts possible revert the pump internals to stock, with the same stock internals removed?

Asked by Alejandro | 12/16/2016, 04:13 PM | 0 answer(s)

Is this compatible with gen 2 (2009~2013) speed 3?

Asked by cheez | 08/24/2016, 05:54 AM | 1 answer(s)

How much does this effect the fuel mileage?

Asked by Jeff | 05/16/2016, 09:00 PM | 3 answer(s)

I'm assuming that with the tappet already mated to the collar there is no further seating required? This is the only step in the process that differs from the instructions.

Asked by Jeff Magill | 04/30/2016, 02:12 PM | 1 answer(s)

I'm running stage 2 intake, boost tubes, and race pipe. Would I be safe for awhile while running theses mods. Still saving for the fuel pump

Asked by Tarango | 03/27/2016, 08:03 PM | 1 answer(s)

Can I run a stage 1 map on my 2013 mazdaspeed 3? Mods: corksport sri w/TIP, corksport cbe.

Asked by Eden Cerna | 03/21/2016, 12:26 PM | 1 answer(s)

My internals came with the tappet already mated to the collar. Is any further seating needed or just slip on? Sorry if this shows up twice, I got a send error the first time.

Asked by Jeff Magill | 04/30/2016, 02:18 PM | 0 answer(s)

Can you do an ots with the stock do pipe

Asked by George | 02/25/2016, 10:36 AM | 1 answer(s)

I've been told this should be the first upgrade to my ms6 before anything, true? I already have exhaust and short ram intake.

Asked by Ryan foley | 01/26/2016, 06:35 PM | 1 answer(s)

I feel like im beating a dead horse here but do you need any specific map to run this HPFP?

Asked by Jacob Pepel | 12/30/2015, 04:46 PM | 1 answer(s)

Is there any sort of break in period needed or recommended after the installing of this pump?

Asked by ANDY | 12/04/2015, 09:28 AM | 1 answer(s)

I bought and installed the HPFP and my relief valve blew. Im buying a new relief valve and need to know what the peak pressure the pump will make so buy the correct relief valve. Thank you in advance P.S do you have any advice on the relief valve?

Asked by Andrew | 10/28/2015, 09:30 PM | 1 answer(s)

Hello, I installed the corksport internal in a brand new hitachi pump in my gti mk5 fsi engine 2008. The stock pump works perfectly fine, however with the corksport internals the car would have difficulty to start, like if the pump is not primed, and when the car does start the ecu throw the code p2293 Fuel Pressure Regulator 2 Performance code, and the car appears to be a limp mode. No boost no power. Apparently the car is experiencing fuel starvation. When I put back the stock internal in the pump, everything is normal. Any suggestion? Should I try with the stock spring?

Asked by Laurent | 10/12/2015, 10:12 AM | 1 answer(s)

At wot sometimes cuts my fuel like a fuel cut would I need internals?

Asked by zack | 10/02/2015, 06:24 AM | 1 answer(s)

Wat advantage does this have over an entire hig pressure fuel pump? Stock Speed6

Asked by Gio | 07/06/2015, 08:30 AM | 1 answer(s)

this works for mazdaspeed3 2007-13 correct?

Asked by Joe | 06/15/2015, 11:07 AM | 1 answer(s)

Would this work with a 2014 Mazda 3?

Asked by Space | 06/09/2015, 04:28 PM | 1 answer(s)

These will work on a 2010+ ms3 right?

Asked by Isaah  | 06/02/2015, 06:34 AM | 1 answer(s)

What should my fuel pressure be at wot/cruise/idle. Im running stock internals with stage 3 corksport cai and inlet pipe. Also running the cobb stage 1 91 cs cai+inlet. Running 1700 at WOT. I need to upgrade just gotta save up. Am I safe or should I down the map to safe mode?

Asked by Derrick  | 04/30/2015, 10:09 PM | 1 answer(s)

Would this also fit the fuel pump in a VW/Audi FSI engine?

Asked by Paco | 02/28/2015, 10:37 AM | 1 answer(s)

Do you need an accessport for any changes after install, or is that optional tuning.

Asked by Mike | 01/22/2015, 06:01 AM | 1 answer(s)

Does this work with 2012 Mazda 3 2.0?

Asked by Adam | 11/18/2014, 03:07 PM | 1 answer(s)

After install the internal, do I need to avoid driving full throttle?

Asked by Jae Il Hwang Park | 11/02/2014, 11:25 PM | 1 answer(s)
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits:
2007-2009 Mazdaspeed 3
2010-2013 Mazdaspeed 3
2007-2012 Cx7 Turbo
2006-2007 Mazdaspeed 6
2007-2009 Mazda 3 MPS
2010-2013 Mazda 3 MPS
2005-2007 Mazda 6 MPS