Shipping Estimator Shipping Estimator

Mazdaspeed Boost Gauge

 
Price: $109.99
Price in points:  What are Points? 110 points
Two color face for easy readability.
GEN-9-341-11
+
Add to wish list

Keep an eye on your turbocharged Mazda’s performance with the CorkSport Electronic Boost Gauge.  Style and design aspects with an optional color change to match your main gauges. With programmable visual and audible warning and peak recalls allows you to know where your Mazdaspeed boost is at a quick glance. Without having to pull data logs. Feel safer that you'll be alerted to problems with your boost levels when they happen.

Learn how to adjust the Peak Recall Limit, Warning Setting Limit and Warning Alarm Settings on the new CorkSport High-Performance Boost Gauge with this video.

Check out the installation instructions below. Share your performance review with the CorkSport community once installed!


The CorkSport Advantage

Mazdaspeed 3 boost gauge

Design Focused

The CorkSport Boost Gauge was designed to be easily readable so you can monitor your Mazdaspeed boost levels with just a quick glance. The simple design shows you exactly what you need to see for boost levels with nothing to distract you. Dual-color backlit faces ensure that it will look good no matter the interior and comes equipped with sun hoods so it will be visible at all hours of the day. You can even wire your boost gauge so they are a different color when you have your lights on at night.

Mazdaspeed Gauge Shield

Precision Accuracy

A stepper motor is used to control the gauge to provide the utmost in accuracy and response time, so you get accurate real-time readouts on when monitoring your boost. In addition, stepper motors allow 270° of the gauge face to be used for the dial to add even more clarity to the visual field. The appropriate sensor and wiring are included with the gauge to ensuring it's boost readouts are as accurate as possible.

Mazdaspeed Gauge Angle

Features

The logic that controls the stepper motor in the boost gauge allows CorkSport to package a few bonus features. There is a programmable boost threshold warning that has both an audio and visual cue to alarm you if you over boost your Mazda. That way, if your Mazdaspeed has troubles with boost spiking the gauge will alert you with an alarm and flashing lights. Finally, there is a peak recall function that will show you the maximum value the boost gauge reached during your most recent driving cycle.

Mazdaspeed Performance Gauges

For example: If Luke is driving his Mazdaspeed3, and wanted to check the max boost level reached during that drive. He is able to refer to his boost gauge using the peak recall function. 

 



Additional Features

  • Compatible with: MZR DISI Engine: Mazdaspeed3, Mazdaspeed6, CX-7 or any turbocharged vehicle
  • Easy Readability: Two colors for easy to read face
  • Accuracy: 270-degree sweep stepper motor needle
  • Designed & Developed in America: CorkSport Mazda Performance is resides in Vancouver, Washington and is located in the beautiful Pacific Northwest.
  • CorkSport Service & Support: 1-year limited warranty, full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

How To Install Your CorkSport Gauges

It will take you 2-4 hours to install the CorkSport Gauges with our easy-to-use instructions.

 

4 Hour Install Time

2-4 Hour Install Time

Difficulty: 3/5

3/5 Difficulty

1-Year Warranty

1-Year Warranty

No CEL

No CEL

I have this gauge installed along with the oil pressure and water temp gauges. All in all, awesome product! I have them installed in an a pillar trippe gauge pod and they look and perform amazingly. Also the warning feature is great. Would definitely recommend these.
Looks great very accurate and very easy to install. The pod isn't the best but were talking about the gauge because that's the important part. The inline filter is a great addition longer lasting as well. The color change feature is awesome white in the day or red at night of vice versa. Love it to death.
Write a review

What pod is being used in the photo with the 2 gauges?

Asked by shayne | 04/13/2018, 12:55 PM | 0 answer(s)

Are all of the gauges required? Can I just use the boost gauge alone? Do I need anything along with the gauge for it to work? Thanks!

Asked by Paul Ragon | 12/12/2017, 08:42 PM | 1 answer(s)

I know these are 52mm but how deep are they? I have a custom vent pod from Block8Head, do you think this will fit? I bought a Autometer mechanical boost gauge 2-1/16" but it doesn't fit length wise with all the fittings and tubing attached.

Asked by Kelvin | 11/13/2017, 02:21 PM | 1 answer(s)

Are these 52mm or 60mm gauges?

Asked by Rob Hillier | 10/26/2016, 09:21 PM | 1 answer(s)

Can I see a picture of the guages installed ? Just wondering where the suggested mounting location is.

Asked by Tony  | 10/26/2016, 09:05 PM | 1 answer(s)

What is the diameter for the gauges?

Asked by Francesco | 11/20/2016, 06:53 AM | 1 answer(s)

Will you guys be making a boost gage for high boost mazdaspeed3? Something up to 50 psi? #PT6466Life

Asked by Micheal Pate  | 12/14/2016, 07:39 PM | 0 answer(s)

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.