Mazdaspeed 6 SRI | Stage II Power Series Short Ram Intake

CorkSport Mazda Performance Gauges Video

Give your 2006-2007 Mazdaspeed 6 immediate boosts in horsepower and torque by bringing more air into the intake chamber. Our simple to install Mazdapseed6 SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport designs each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport Mazdaspeed6 Short Ram Intake netted max gains of +25 lb torque and +33 HP.

The CorkSport Advantage:

Best value on the market! Our MS6 intake kit includes the turbo inlet pipe to completely replace the stock intake tubing. Purchased separately this part can cost anywhere from $150-$200
Choose from 108 different color combinations to customize the look of your SRI
Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection
Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
CARB Approved: Designed and approved to meet California Air Resources Board Emissions Standards: Carb Approval
Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
Stainless steel T-bolt clamps: Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow
Replacement Air Filter is: Available Here
Corksport Service and Support: Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

Install time 3/5 Difficulty 2 year warranty No CEL

I've put quite a few CAIs on Mazda3s over the past 6 years but this is the first MS3 I've done. Man was it a pain in the butt compared to a naturally aspirated car; nevertheless, it was worth it. I'm about 600 miles away from my home and tools and was able to use a tool kit purchased at the local gas station, some pliers, and a crescent wrench. I would suggest having what it recommends but I'm an AmeriCan, not an AmeriCan't. 2012 MS3 sounds awesome and pulls like hell.

Shane Miller02/24/2012, 03:25 AM

Just installed this on my 2011 speed3. I bought the car brand new in August of 2011 so it has less than 8,000 miles. Immediate power gain and incredible sound. Not only does the turbo spool up faster, it also holds boost much better than with the stock air intake. Took longer to install than the estimated time on the instructions, but not difficult. Instructions were easy to follow and had great diagrams. Glad I chose this as my first mod.

Marc Walker02/16/2012, 06:23 PM

real quality parts and great shipping customer service cant be beat and if mapped with the cobb tuner this intake is the best

VinnyTheBush01/03/2012, 12:00 PM

My first mod on my 2012 ms3. Excellent quality. Best bang for the buck. Easy install. Love the sounds. Good job Corksport... :)

Corey May12/31/2011, 12:30 AM

this is a great product for the money adds great power, and sounds great to boot........ however the first mod should be the motor mount insert, but this for sure should be the second.

Jason Steinley12/14/2011, 08:34 PM

This is the first mod that you should do on your Mazdaspeed3!! What a difference it makes and the sound of the turbo spool makes driving your speed a whole new beast. The installation instructions that are provided by Corksport are perfect and easy to follow so installing this mod is no problem. Thank you Corksport for making such a high quality mod! Don’t wait, the SRI and TIP are worth the money and it is the best value compared to any other company. Stop reading reviews and pick this up now!!

Jeremy Lyczewski12/06/2011, 11:12 AM

I would like to start this review by stating my mechanical experience:

NONE

With that being said...wow!

I ordered the part on Sunday afternoon and received it Thursday (in Florida). Everything was packed with care, including the instructions. When the weekend finally rolled around, I requested a helping hand from my father-in-law and his tools. Seeing as this was my first installation of an aftermarket part, I thought I needed all the help I could get. Even though his help was greatly appreciated, looking back on it now, I realized I could have taken care of this myself. The instructions were perfect. From start to finish, everything was laid out in such an intuitive manner in the instructions, it would be difficult NOT to install it correctly! It took a little over 1 and 1/2 hours (if I had any prior mechanical experience, I'm sure it would have only taken about 40 minutes or less, but since I kept on referring back to the instructions every few moments to ensure a proper install, it took me longer). It really is shocking to see the factory parts that Mazda used. And when comparing them to Corksport's parts, it is a wonder the car even ran! When installing the parts, you can see the meticulous details that Corksport put into their parts, from the welding and bends, to the quality raw materials to make this Mazda scream now! And man does it scream! After installing the parts and ensuring everything was secure, I cranked her up and let her sit at idle to make sure I didn't get any CELs. After that period was over, it as time for the test drive. I wanted the full experience, so I rolled the windows down to hear the SRI and TIP pull in the air...but it wasn't my ears that caught the first difference, it was the "butt dyno." When I gave her some gas, I was grinning from ear to year. The additional power and sound still gets me every time. The car has more pull and a beautiful "Whoooosh!" sound kicks in when you give it some gas. Along with this, if you drive "like a normal person" you improve your gas mileage by a few mpg...but with the power and sound, it is awfully hard not to push the accelerator a little harder than normal.

After it is all said and done, I couldn't be happier. From detailed instructions to noticeable power gains, the total experience was flawless. Corksport has a customer for life! Great product and great service!

Gerald Rollason10/17/2011, 01:15 PM

This item arrived quickly and well protected. The install went smoothly and the fit was very good. My expectations were modest even in light of the hefty power gains claimed by CorkSport. My expectations have definetely been exceeded. The power increase is phenomenal. The sound of air rushing in is addictive. I typically leave the radio off now with the side window down just to enjoy the sound. while unscientific, my "seat of the pants" dynometer confirms CorkSports power claims. This is a terrific modification and worth every penny at twice the price.

Justin Huntington10/05/2011, 02:22 PM

good install and excellent quality. the sound is pretty cool

Vetter10/01/2011, 04:28 PM

Took me a little longer to install but was well worth it, Chris at corksport was super helpful and I'm so happy with how the car sounds and performs now, hands down amazing part!

Stephen Biroc09/30/2011, 05:28 PM

← Prev

1 2 345 6 7

Next →

Write a review

Can i run this intake with a cst4/350whp down the road?

Asked by Zac Barker | 07/11/2022, 03:24 AM | 1 answer(s)