Mazdaspeed 6 SRI | Stage II Power Series Short Ram Intake

CorkSport Mazda Performance Gauges Video

Give your 2006-2007 Mazdaspeed 6 immediate boosts in horsepower and torque by bringing more air into the intake chamber. Our simple to install Mazdapseed6 SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport designs each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport Mazdaspeed6 Short Ram Intake netted max gains of +25 lb torque and +33 HP.

The CorkSport Advantage:

Best value on the market! Our MS6 intake kit includes the turbo inlet pipe to completely replace the stock intake tubing. Purchased separately this part can cost anywhere from $150-$200
Choose from 108 different color combinations to customize the look of your SRI
Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection
Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
CARB Approved: Designed and approved to meet California Air Resources Board Emissions Standards: Carb Approval
Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
Stainless steel T-bolt clamps: Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow
Replacement Air Filter is: Available Here
Corksport Service and Support: Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

Install time 3/5 Difficulty 2 year warranty No CEL

Hardest part is removing the old parts. Installed in about 30 minutes. Noticable HP increase. Well worth the money.

Thomas Busciglio02/13/2011, 02:01 PM

Installation of the Corksport sri was a bit time consuming but straight forward and easy. For the money it is a very good product. Power gain is noticeable and the sound of hearing the turbo spool never gets old. If you get the sri also get the Forge BPV at the same time. They sound and look amazing together!!

Frank Francia12/25/2010, 09:14 AM

I have had this intake on my car for over a week now and I LOVE IT!!!!! This was a fairly easy project to install and the quality and fitment are superb. I love the way it sounds and the power it has generated is wonderful. Thank you Derrick for all your help and a great product. This intake is def what my car was missing.

Chris Hayes11/21/2010, 02:35 PM

As the previous reviews have listed, the worse part is removing the stock parts. After that the CS SRI/TIP goes on quick and matches up tightly. The sound is amazing. The only draw back is a slight loss of power in the lower RPM range. I am already contemplating adding the race pipe to try to regain my low end power. Hopefully CS has a solution for the CEL on the down pipe, as well! Nothing like 310+ hp in a hatchback!!!

Logan Rees11/01/2010, 10:01 AM

THE #1 mod that should be installed onto this car is this here intake. The gains are noticeable, the sound is loud enough to hear the woosh, but quiet enough where it doesn't annoy you. Absolutely spectacular product!

Pat Bateman[YP]10/13/2010, 03:52 PM

Great product and great quality. The car feels really strong and the sound is awesome. Derrick hooked me up with some great service and answered every one of my questions. Thanks guys!

Patrick Smith10/07/2010, 08:36 AM

All I can say about this intake is WOW!!!! This system was very simple to install. The only thing that took any time at all was removing all of the stock parts. Talk about a very poor flowing stock intake system!! When that was all done putting the CorkSport on was a cake walk. The inlet pipe fit rite up to the turbo nice and snug. When I was all done instaling I took the car out for a little spin. The sounds this system makes are crazy!!! It put a big smile on my face. The performance is even better!!! The turbo is rite there from the dig and never drops or falls. This is the best intake system I have ever heard or felt.The power gain's you get from this intake system are AMAZING!!!. If you have a 2010 Speed3 then you need this intake kit. Great job CorkSport for a great intake system.

Robbie Stiff09/28/2010, 08:00 AM

Great product. Warning, I am a driver, not an installer. I do not even like to look under the hood, I just like to drive my awesome 2k10 ms3. I pay for my parts to be put on.

Pros:

-Great power increase starting mid-range and finishing through top of rpm range

-horsepower per dollar upgrade is as good as it gets

-more powerful sound than stock

Cons:

-None, this is an extremely well priced and useful part, couldn't imagine the car without it.

Kevin Grillo09/22/2010, 06:19 PM

I noticed after installing the intake that I lost a little power in the lower rpm range. However, the top-end performance has been greatly enhanced. Stock, it used to fall on its face after 4500 or so. Now it pulls hard all the way to red-line. I recommend buying the race-pipe as well to bring back some of the low-end power you lose.

Brett Jackson09/05/2010, 04:18 PM

Wow! The first time I heard the sound of the intake I honestly giggled. This intake paired with a Turbosmart Dual Port BOV makes some fantastic noise; almost sounds like a purring panther. Car pulls harder and turbo spools quicker. This is a no brainer upgrade. Excellent quality product. Easy install though takes some patience, the right tools and tiny hands are useful.

Adam McCall09/04/2010, 11:55 AM

← Prev

1 2 3 4 567

Next →

Write a review

Can i run this intake with a cst4/350whp down the road?

Asked by Zac Barker | 07/11/2022, 03:24 AM | 1 answer(s)