FREE CS Backpack!
Add $399 in Parts, Then Add Backpack!
Finally Use Code: CSBACKPACK
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

CorkSport Mazda Performance

Shipping Estimator Shipping Estimator

Get rates

2006-2007 Mazdaspeed 6 Stage II Power Series Short Ram Intake

Write a review
 
Price: $279.99
Price in points:  What are Points? 280 points
Axl-6-118-13130
+ −
Add to wish list

Give your 2006-2007 Mazdaspeed 6 immediate boosts in horsepower and torque by bringing more air into your DISI engine with our performance air intake.

Our simple to install Mazdaspeed6 SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport designs each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport Mazdaspeed6 Short Ram Intake netted max gains of +25 lb torque and +33 HP.


The CorkSport Advantage:
 
  • Best value on the market! Our MS6 intake kit includes the turbo inlet pipe to completely replace the stock intake tubing. Purchased separately this part can cost anywhere from $150-$200
  • Choose from 108 different color combinations to customize the look of your SRI
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • CARB Approved: Designed and approved to meet California Air Resources Board Emissions Standards: Carb Approval
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Replacement Air Filter is: Available Here
  • Corksport Service and Support: Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support
    •   

Technical DocumentsVideo Clips


Install time                  3/5 Difficulty               2 year warranty       No CEL




Hardest part is removing the old parts. Installed in about 30 minutes. Noticable HP increase. Well worth the money.
Thomas Busciglio 02/13/2011, 02:01 PM
Installation of the Corksport sri was a bit time consuming but straight forward and easy. For the money it is a very good product. Power gain is noticeable and the sound of hearing the turbo spool never gets old. If you get the sri also get the Forge BPV at the same time. They sound and look amazing together!!
Frank Francia 12/25/2010, 09:14 AM
I have had this intake on my car for over a week now and I LOVE IT!!!!! This was a fairly easy project to install and the quality and fitment are superb. I love the way it sounds and the power it has generated is wonderful. Thank you Derrick for all your help and a great product. This intake is def what my car was missing.
Chris Hayes 11/21/2010, 02:35 PM
As the previous reviews have listed, the worse part is removing the stock parts. After that the CS SRI/TIP goes on quick and matches up tightly. The sound is amazing. The only draw back is a slight loss of power in the lower RPM range. I am already contemplating adding the race pipe to try to regain my low end power. Hopefully CS has a solution for the CEL on the down pipe, as well! Nothing like 310+ hp in a hatchback!!!
Logan Rees 11/01/2010, 10:01 AM
THE #1 mod that should be installed onto this car is this here intake. The gains are noticeable, the sound is loud enough to hear the woosh, but quiet enough where it doesn't annoy you. Absolutely spectacular product!
Pat Bateman[YP] 10/13/2010, 03:52 PM
Great product and great quality. The car feels really strong and the sound is awesome. Derrick hooked me up with some great service and answered every one of my questions. Thanks guys!
Patrick Smith 10/07/2010, 08:36 AM
All I can say about this intake is WOW!!!! This system was very simple to install. The only thing that took any time at all was removing all of the stock parts. Talk about a very poor flowing stock intake system!! When that was all done putting the CorkSport on was a cake walk. The inlet pipe fit rite up to the turbo nice and snug. When I was all done instaling I took the car out for a little spin. The sounds this system makes are crazy!!! It put a big smile on my face. The performance is even better!!! The turbo is rite there from the dig and never drops or falls. This is the best intake system I have ever heard or felt.The power gain's you get from this intake system are AMAZING!!!. If you have a 2010 Speed3 then you need this intake kit. Great job CorkSport for a great intake system.
Robbie Stiff 09/28/2010, 08:00 AM
Great product. Warning, I am a driver, not an installer. I do not even like to look under the hood, I just like to drive my awesome 2k10 ms3. I pay for my parts to be put on.



Pros:

-Great power increase starting mid-range and finishing through top of rpm range

-horsepower per dollar upgrade is as good as it gets

-more powerful sound than stock



Cons:

-None, this is an extremely well priced and useful part, couldn't imagine the car without it.
Kevin Grillo 09/22/2010, 06:19 PM
I noticed after installing the intake that I lost a little power in the lower rpm range. However, the top-end performance has been greatly enhanced. Stock, it used to fall on its face after 4500 or so. Now it pulls hard all the way to red-line. I recommend buying the race-pipe as well to bring back some of the low-end power you lose.
Brett Jackson 09/05/2010, 04:18 PM
Wow! The first time I heard the sound of the intake I honestly giggled. This intake paired with a Turbosmart Dual Port BOV makes some fantastic noise; almost sounds like a purring panther. Car pulls harder and turbo spools quicker. This is a no brainer upgrade. Excellent quality product. Easy install though takes some patience, the right tools and tiny hands are useful.
Adam McCall 09/04/2010, 11:55 AM
← Prev
1 2 3 4 5 6 7
Next →
Write a review

Can i run this intake with a cst4/350whp down the road?

Asked by Zac Barker | 07/11/2022, 03:24 AM | 1 answer(s)

is there any 3.5 intake for ms6?

Asked by vireak | 10/15/2021, 03:18 AM | 1 answer(s)

Will this fit interchangably on the Mazdaspeed 3 gen2?

Asked by Johnas | 01/28/2020, 05:05 AM | 1 answer(s)

Will this replace both the factory TIP and Intake?

Asked by Jake | 12/01/2017, 08:24 AM | 1 answer(s)

What is the diameter of this intake and what is the diameter of air filter mouth is required?

Asked by David | 06/21/2016, 05:07 PM | 1 answer(s)

If this is my one and only modification, will I be OK using the stock fuel pump or should I upgrade?

Asked by Daniel | 11/02/2015, 04:08 AM | 1 answer(s)

Is this a 3.5" or 3" MAF housing?

Asked by Dan | 10/28/2015, 04:54 PM | 1 answer(s)

Would I need a Tune if I install this?

Asked by Brandon | 06/18/2015, 03:15 PM | 1 answer(s)
New post
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.


Jeff Shugg
Comment
Great price, excellent quality, and other than having to slightly re-position the battery for some clearance the install was clean and simple. Performance increase with absolutely no issues after almost 1 year and 30,000km of use!
Adam Desrochers
Comment
This intake and turbo inlet pipe is amazing!! the install was super easy and fun to do took me about 45min to take off the stock parts and put on the stage II stuff, the clamps that come with are great and the shipping only took 3 days to get to me!... after the install the first test drive put a smile on my face, between the sound of turbo sucking air and the sound of the BPV when shifting is great, cant wait to buy more corksport parts because now i know there top quality.
Sam
Comment
Amazing kit. Really awesome finish and fitment was perfect for me.



Turbo spool sound is really nice. Linked with the Forge BPV, I couldnt be happier.
Christopher Mazzei
Comment
This intake is an amazing first modification. I have been running it in my SPEED6 for a year/12000 miles. It unlocks the noise of the turbo spooling and gives you a bit more noticeable power without an accessport or a tune. The instructions were clear and well thought out. Watch out for the factory boost control solenoid nipples on high mileage cars because they become brittle and can easily break. Overall I absolutely love the product. Thank you Corksport!
Sean Rivers
Comment
Installed this about 4-5 months ago on my '06 MS6 and I love it! Great sound under boost and the look under the hood is perfect for me. I went all black for more of a "stealth" look and couldn't be happier. I would highly recommend this SRI to any MS6 owner. Installation instructions were easy to follow and all in all was an easy to moderate install. I will definitely be purchasing more Corksport products for my MS6 in the future!
Shawn Thompson
Comment
This was fairly easy to install. I had already taken out the intake resonator so I didn't have to do that during the installation. Just make sure that when you are pulling the hoses off of the connections you are careful because they break easily. The whooshing sound is wonderful!! The power wasn't too noticeable around town, but on the freeway it was very noticeable! Absolutely recommended!!
Jordan Shrum
Comment
Bought this as a replacement for my worn out Mazdaspeed 6 In-Fender Cold Air Intake. This intake is by far the best out there for the MS6 as it replaces key items such as the turbo inlet tube, which gives even throttle throughout the RPM band. Easy to install as I bought the all black kit to keep my engine bay looking OEM. Also thank you Corksport for the superior customer service, called me to let me know when the item shipped! Thank you Corksport for the superior items and great customer service!
Erik M
Comment
Let me say first off it came in, in 2 days and the instructions ( if u don't know how) were supper easy to follow and the results were um well more than expected!!!!!! My ms6 sounds awesome!!!!!! Must buy if you just starting to mod
Evan Defibaugh
Comment
The install time was about 2 hours for me. I kept trying to make the wiring harness that goes over the TIP fit well. I gave up on that. I love that it is metal and has a metal fitting for the boost solenoid to the TIP. I did have some trouble installing the air flow sensor, but that was because the holes weren't drilled evenly from Mazda. The intake bit is a bit floppy. I'm trying to make a PVC support for it.



It sounds so good! I hold more boost! I've had it in for just over a week.
Ryan Kelly
Comment
Best and easiest addition to enhance performance. Sounds great when you tap in to the turbo, definitely notice a power increase! I did have to drill a new hole in the battery tray because it was rubbing the TIP and removing the paint.
← Prev
1 2 3 4 5 6 7
Next →

Recommended Products Recommended Products

2023 Racepipe T-Shirt - CorkSport 25th Ye...
$24.99
Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
$39.99
2019+ Mazda 3 Rear Wiper Delete
$39.99
Mazdaspeed Boost Control Solenoid
$129.99
Mazdaspeed 3 TMIC Top Mount Intercooler
$399.99
CorkSport 7th Gear
$99.99