Save An Additional $15
Part Orders Over $199.99!
Use Code: CSBonus15
Save $10 on Part Orders Over $449.99!
CorkSport Mazda Performance
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Shipping Estimator Shipping Estimator

Get rates

2006-2007 Mazdaspeed 6 Stage II Power Series Short Ram Intake

62 reviewsWrite a review
Old price: $279.99  
Price: $265.99
You save: $14.00 (5%)
Price in points: What are Points?266 points
Save $14.00
Axl-6-118-11320
+−
Add to wish list


Give your 2006-2007 Mazdaspeed 6 immediate boosts in horsepower and torque by bringing more air into the intake chamber. Our simple to install Mazdapseed6 SRI includes a MAF housing that is precision machined from one piece of billet aluminum with included air straightener. Designed to maintain optimal flow and generate ideal performance, Corksport designs each part with exacting tolerances and uses the latest in computer aided manufacturing techniques to make sure you get the highest quality, best performing part for your money. In initial testing, the CorkSport Mazdaspeed6 Short Ram Intake netted max gains of +25 lb torque and +33 HP.

The CorkSport Advantage:
 
  • Best value on the market! Our MS6 intake kit includes the turbo inlet pipe to completely replace the stock intake tubing. Purchased separately this part can cost anywhere from $150-$200
  • Choose from 108 different color combinations to customize the look of your SRI
  • Prevent air leaks and inaccurate readings that can cause check-engine lights: The MAF sensor is secured to the housing using T304 stainless fasteners for a rock solid connection
  • Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
  • CARB Approved: Designed and approved to meet California Air Resources Board Emissions Standards: Carb Approval
  • Custom reinforced silicone connector constructed with multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
  • Stainless steel T-bolt clamps: Available in stealth black or polished stainless and ensure an airtight seal which prevents unmetered airflow
  • Replacement Air Filter is: Available Here
  • Corksport Service and Support: Receive a two year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support
    •   

Technical DocumentsVideo Clips


Install time                  3/5 Difficulty               2 year warranty       No CEL




This intake and turbo inlet pipe is amazing!! the install was super easy and fun to do took me about 45min to take off the stock parts and put on the stage II stuff, the clamps that come with are great and the shipping only took 3 days to get to me!... after the install the first test drive put a smile on my face, between the sound of turbo sucking air and the sound of the BPV when shifting is great, cant wait to buy more corksport parts because now i know there top quality.
Adam Desrochers08/01/2013, 10:24 PM
Great price, excellent quality, and other than having to slightly re-position the battery for some clearance the install was clean and simple. Performance increase with absolutely no issues after almost 1 year and 30,000km of use!
Jeff Shugg04/11/2013, 08:59 PM
Pretty easy install with a buddy of mine, and I can easily tell that the car sucks in more air (you can very easily tell that the car is breathing in much more air). Nothing like hearing the car breath then the stock blow off valve open up a little louder. Can't wait to get my new BOV and Exhaust in from CorkSport! Overall a great upgrade that will be couple with a new top mounted intercooler for added airflow to the car. Can't wait to get the car dyno tested this summer to see what kind of power gains I've got :).



As always thanks again Derrick!
Andrew Berhorst12/20/2012, 08:23 AM
Install time was roughly an hour and a half and worth every minute. Only negative I can say is that it would be great if the instructions were laminated because mine are totally destroyed now because my engine bay was filthy! Positives are a noticeable decrease in the lag time between the turbo spool up, and everyone has to love being able to hear the car take a deep breath right before the turbo spools up. Can't wait for my BOV and Turboback exhaust kit to come in. Merry X-mas to me :).
Andrew Berhorst12/05/2012, 08:43 AM
Best SRI/TIP on the market for the MS6 in terms of price and performance. Been using it for a couple months now. Install was straightforward using the instructions provided (my very first intake install). The sound of the turbo spool still brings a smile to my face :). Performance gains are felt instantly while passing or merging onto the highway. Another great product paired with amazing customer service from CS!
Aleem Datoo11/10/2012, 12:46 PM
I got my custom blk n red piece for my speed 6 and i adore it, the sound of the turbo spooling is intoxicating and you can feel the engine thanking you for allowing it to suck all the air it needs, had a stock airbox with a k&n and i wanted to burn it after this install. excellent product
Phil09/23/2012, 10:39 PM
installed this about a month ago. Its awesome!!! The sound it makes + performance is fantastic, you can hear the turbo spool up. Best part is when you get to speed it all settles down and is not a distraction. When you plant it, there the sound is again though. Awesome MOD!
Timothy Walter09/19/2012, 08:55 PM
Been using this product for months now. Unbelievable difference from stock, and the turbo spool is crazy sounding!! Thanks CS, great product!!!!!!
Nathan McIntyre08/16/2012, 09:19 PM
Great looking intake. fantastic sound. quality materials. definitely gave me some high-end power.



my only problem is whoever engineered this for the MS6 didn't do a very good job fitting it. i ended up having to drill holes in my battery tray and relocate it in order to make room for the TIP. now the tray sits at an angle and looks weird.
Matt Mogavero07/11/2012, 10:03 AM
I'm going to start by saying that this is a great deal. For an SRI and a TIP both for the price is very exceptional. Plus, the ability to customize the colors is just icing on the cake. My car sounds great with it on and no problems at all with the MAF sensor / no CEL's.



Now for the negative part of my review: the clamp that's provided to connect the SRI to the TIP is too small. I had to use the stock clamp, but it worked fine. The breather hose was also too long, resulting in me having to cut it so that it doesn't kink. Lastly, one last (but small) gripe: the instructions state to install the MAF sensor in the housing so that the wire connector is on the opposite side of the airflow arrow, this isn't the case.



In reality, my complaints are tiny drops in a bucket. The Corksport Stage II SRI and TIP are a great investment.
Ted Dornin06/13/2012, 10:06 PM
← Prev
1234567
Next →
Write a review
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.


Recommended Products Recommended Products

Save $5.00
2023 Racepipe T-Shirt - CorkSport 25th Ye...
$24.99 $19.99
Save $2.00
Mazdaspeed 3/Mazda 3 Wiper Delete for 201...
$39.99 $37.99
Save $2.00
2019+ Mazda 3 Rear Wiper Delete
$39.99 $37.99
Save $6.50
Mazdaspeed Boost Control Solenoid
$129.99 $123.49
Save $20.00
Mazdaspeed 3 TMIC Top Mount Intercooler
$399.99 $379.99
CorkSport 7th Gear
$99.99