Mazdaspeed and Mazda 3 Urethane Exhaust Hangers

Mazdaspeed 3 urethane performance exhaust hangers

Keep your new exhaust firmly in place with CorkSport Urethane Exhaust Hangers. Combining a new exhaust system with the stock rubber exhaust hanger allows for movement under normal driving conditions and can cause a thumping of the exhaust touching the underside of your car when going over bumps or navigating potholes. Autocrossing or high performance driving can also result in movement during aggressive steering maneuvers. Installing the CorkSport exhaust hangers will limit the excessive movement of your performance exhaust and keep you system tightly in place.

The CorkSport Advantage

Made from firm, long lasting polyurethane
Stylish blue color and molded to an exact fit
Works with CorkSport, stock, and most aftermarket exhaust systems that use stock exhaust hanger diameter
Single exit set contains four hangers, dual exhaust set contains six hangers for a secure, precise fitment on the Mazda 3
CorkSport Service and Support: Receive full color installation instructions, all of the needed hardware and knowledgeable telephone installation support

Please note the quantity of the hangars in this kit is designed for the CorkSport Power Series Exhaust systems. If you are using the exhaust hangars with the factory exhaust system you will not have enough hangars for all mounting locations.

Install time 1/5 Difficulty 2 year warranty No CEL

Have the UR catback and basically no longer wanted to drive my car because of how bad it banged around and squeaked. Wasn't to sure if I wanted to drop 60 dollars on some hangers, but I'm glad I did. Exhaust fits tight now and does not make any unwanted noises. Thanks corksport. 2013ms3

Mike04/05/2014, 04:11 PM

Had problems with my Ultimate Racing Catback moving around when going over speedbumps, now the exhaust stays solid and doesn't hit anything or squeak over bumps. Absolutely pleased with this product

Erick03/14/2014, 04:56 PM

any chance of these coming in anything but blue?

CorkSport Reply:Blue is the only option.

James01/27/2014, 04:51 PM

This fixed the issue of my CBE moving around and banging around making my 13 MS3 sound like an old beater.. outstanding.

Jose10/05/2013, 11:10 PM

Used these with a CP-E exhaust system perfect fit look good and easy to install. Hold my exhaust nice and tight.

Randy Scrivner09/18/2013, 02:28 AM

My exhaust is not going anywhere unlike before. Great product. No more banging on my control arm.

Matt Grenauer05/31/2013, 05:43 AM

First, I just wanna say, THESE ARE SUCH A HUGE IMPROVEMENT OVER THE OEM JUNK THAT MAZDA INSTALLS and they look soo much nicer too! Second, These should be recommended when ordering the Axle-Back Muffler Delete Exhaust System. Due to the increased vibration without the mufflers, the hanger on the mid pipe behind the test pipe was banging around underneath the car and it was unpleasant to say the least! And the rest of the system was soo loose, it looked terrible. These hangers are a great quality item and help alot with absorbing the vibrations and harshness and hold the exhaust with a firm grip and now the system hardly moves. If it wasn't for these hangers I was about ready to sell the Muffler Delete, but now I'm keeping it and wringing it out LOUD!! Thanks CorkSport for a great item, just recommend it with the Muffler Delete so the rest of your customers don't have to go through what I did. Keep up the great work for the Mazda(Speed) crowd!

Jeffrey04/15/2013, 02:02 PM

Awesome!! My aftermarket exhaust flopped around like a dead fish and made all sorts of noises! My car sounded like a beater! Got these installed today and no more exhaust movement! Thanks Corksport!

James03/21/2013, 07:21 PM

These go on very easy. Cut the old ones off. Once you put these on though, its a pain to get them off but thats the point isn't it? These work great. My exhaust stayed right where it should when i ran my car tonight after the install (DP, racepipe, CBE) and i really ran her hard tonight. Thank you CorkSport for another great product. And vibrations aren't bad from the exhaust like my friends :)

Sean Strout01/27/2013, 08:26 PM

Excellent product. Took away all of the exhaust movement, with my aftermarket CBE. Now my exhaust doesn't hit the under carriage of my car, when corning hard.

Tyler Hasenpflug10/09/2012, 05:38 PM

← Prev

12

Next →

Write a review

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Mike

04/05/2014, 04:11 PM

Comment
Have the UR catback and basically no longer wanted to drive my car because of how bad it banged around and squeaked. Wasn't to sure if I wanted to drop 60 dollars on some hangers, but I'm glad I did. Exhaust fits tight now and does not make any unwanted noises. Thanks corksport. 2013ms3

Erick

03/14/2014, 04:56 PM

Comment
Had problems with my Ultimate Racing Catback moving around when going over speedbumps, now the exhaust stays solid and doesn't hit anything or squeak over bumps. Absolutely pleased with this product

James

01/27/2014, 04:51 PM

Comment
any chance of these coming in anything but blue?

CorkSport Reply:Blue is the only option.

Jose

10/05/2013, 11:10 PM

Comment
This fixed the issue of my CBE moving around and banging around making my 13 MS3 sound like an old beater.. outstanding.

Randy Scrivner

09/18/2013, 02:28 AM

Comment
Used these with a CP-E exhaust system perfect fit look good and easy to install. Hold my exhaust nice and tight.

Matt Grenauer

05/31/2013, 05:43 AM

Comment
My exhaust is not going anywhere unlike before. Great product. No more banging on my control arm.

Jeffrey

04/15/2013, 02:02 PM

Comment
First, I just wanna say, THESE ARE SUCH A HUGE IMPROVEMENT OVER THE OEM JUNK THAT MAZDA INSTALLS and they look soo much nicer too! Second, These should be recommended when ordering the Axle-Back Muffler Delete Exhaust System. Due to the increased vibration without the mufflers, the hanger on the mid pipe behind the test pipe was banging around underneath the car and it was unpleasant to say the least! And the rest of the system was soo loose, it looked terrible. These hangers are a great quality item and help alot with absorbing the vibrations and harshness and hold the exhaust with a firm grip and now the system hardly moves. If it wasn't for these hangers I was about ready to sell the Muffler Delete, but now I'm keeping it and wringing it out LOUD!! Thanks CorkSport for a great item, just recommend it with the Muffler Delete so the rest of your customers don't have to go through what I did. Keep up the great work for the Mazda(Speed) crowd!

James

03/21/2013, 07:21 PM

Comment
Awesome!! My aftermarket exhaust flopped around like a dead fish and made all sorts of noises! My car sounded like a beater! Got these installed today and no more exhaust movement! Thanks Corksport!

Sean Strout

01/27/2013, 08:26 PM

Comment
These go on very easy. Cut the old ones off. Once you put these on though, its a pain to get them off but thats the point isn't it? These work great. My exhaust stayed right where it should when i ran my car tonight after the install (DP, racepipe, CBE) and i really ran her hard tonight. Thank you CorkSport for another great product. And vibrations aren't bad from the exhaust like my friends :)

Tyler Hasenpflug

10/09/2012, 05:38 PM

Comment
Excellent product. Took away all of the exhaust movement, with my aftermarket CBE. Now my exhaust doesn't hit the under carriage of my car, when corning hard.

← Prev

12

Next →