Race Pipe | Mazdaspeed3 Exhaust

	CODE	Fitment	Availability	Price
	CODE:Axe-6-114-10	80mm Exhaust Flange - Dec 2024	Availability:In stock	$199.99
	CODE:Axe-6-114-12	Stock Exhaust Flange	Availability:In stock	$183.99

Get 10-12 added WHP from your 2007-2013 Mazdaspeed 3 with the CorkSport Power Series Racepipe. By replacing the second catalyst on your Mazdaspeed 3 with this direct bolt on replacement, the severe air flow restriction is removed, providing significant improvements in performance and power.

The CorkSport Advantage

80mm flange for the CorkSport aftermarket cat-back, or a 65mm fitment for stock catback exhausts.

Best Fitment: Options of an 80mm flange for true 3" aftermarket exhausts such as the CorkSport cat-back, or a 65mm fitment for stock catback exhausts.

The CorkSport Advantage

Fitment:2007-2013 Mazdaspeed 3.
Gains in power up to 12 WHP: when installed on an otherwise stock Mazdaspeed
Minimal exhaust flow restriction: Removes the unmonitored stock second catalyst removing the restricted airflow without triggering an unwanted check engine light
Two available configurations: Available with a 65mm or 80mm outlet diameter for stock or aftermarket exhaust fitment.
Uses factory style flanges: The front connection features a full floating front flange and spherical gasket connections to attach seamlessly to the factory or aftermarket downpipes
Superior construction: Made from TIG welded T304 stainless steel and solid stainless exhaust hangers
CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support

Important Notes:

If your aftermarket cat back exhaust is designed to bolt to the stock catalyst you will need to order the stock fitment racepipe.
Our racepipe is not recommended to be used with Turbo XS and ATP downpipes due to the flat flange mounting that comes with their products.
Removing a stock catalyst from a road vehicle is illegal in most states. Racepipes are for race use only and are note to be used on the street
*If you plan on installing the CorkSport Downpipe with High-Flow Cat at a later date it will replace the racepipe section of your exhaust.*

2 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Nice looking piece but the hangers are too long to mount with the down pipe to. there’s a ton of rattling have to take the car to an exhaust shop to cut the hangers for correct fitment .

Dylan Meredith02/05/2024, 12:01 PM

I have the corksport cat back exhaust, should I get 80 mm flange or 65 for this race pipe

STeven Licon04/04/2018, 10:29 AM

Write a review

is a custom tune required for installing this on the mazdaspeed3? also, do i need hpfp internals for this mod? will i risk blowing the engine if i run th racepipe on a stock mazdaspeed without the hpfp internals AND a matching tune? please answer both questions.

Asked by Bryan Feranec | 10/31/2024, 08:45 AM | 1 answer(s)

What is the size of the threading for the spring bolts on the side of the racepipe that connects to the catback exhaust?

Asked by Lev Vinokur | 11/13/2023, 08:34 PM | 1 answer(s)

I have the corksport cat back. If I get a full size downpipe is this just redundant?

Asked by Daniel | 03/23/2024, 10:20 AM | 1 answer(s)

is this racepipe street legal in illinois? DOT and DMV doesn't state this product on their website.

Asked by bryan | 08/19/2023, 08:39 AM | 1 answer(s)

I have a corksport short downpipe.. which flange do I need to select if I still have stock catback but the corksport short downpipe?

Asked by Mansur | 08/05/2023, 08:43 AM | 1 answer(s)

If I bought the corksport short down pipe what size flange should I get for the racepipe?

Asked by Erubey Lopez | 11/24/2022, 05:25 PM | 1 answer(s)

If i want to put this racepipe on stock downpipe but i already got cobb catback exhaust what fitment should i chose? (i dont want to change whole downpipe with cobb)

Asked by Juraj | 11/13/2022, 09:04 AM | 1 answer(s)