Mazdaspeed 3 Lower Tie Bar

Track tested and racer approved, the CorkSport Lower Tie Bar is designed to add rigidity to the front suspension sub-frame. By connecting the inboard pivot points for the front lower control arms, the lower tie bar adds opposing strength to the sub-frame that helps reduce wheel hop and torque steer. In the opposite manner, the lower tie bar also helps improve braking performance. #ZoomZoom!

Check out the installation instructions below. Share your performance review with the CorkSport community once installed!

The CorkSport Advantage

High Strength Design

Manufactured from 1”x0.120” wall tubing and 0.190” plate bracket ends, the design is non-adjustable for simplistic strength.

Track Tested

Drag race testing showed improvements in both 60 foot and ¼ mile consistency. Improved predictability under hard launches.

Additional Features

Compatible with:2007-2013 Mazdaspeed 3
CorkSport Skid Tray Compliance: The lower tie bar was also designed to work flawlessly with the CorkSport Skid Trays for both Gen1 and Gen2 Mazdaspeed 3.
Designed & Developed in America: CorkSport Mazda Performance resides in Vancouver, Washington, and is located in the beautiful Pacific Northwest.
CorkSport Service & Support: 2-year limited warranty, full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

***This only applies to 2010-2013 Mazdaspeed 3. Please view this picture to see if your Speed3 has the bracket shown with the red arrows. If it does have the bracket you will need the spacers for installation. If you do not have the bracket shown, the bar will install without the spacers.

How To Install Your CorkSport Lower Tie Bar

It will take you 30 minutes to install the CorkSport Lower Tie Bar with our easy-to-use instructions.

30 Minute Install Time

2/5 Difficulty

2-Year Warranty

No CEL

I have the v1 (original design) lower tie bar. Love it. It does all the things listed above. If this one is truly stronger, it's a huge win for you.

This thing was one of my first upgrades and is a must have.

Christopher DeCaro10/13/2016, 03:26 PM

← Prev

1 23

Next →

Write a review

will it fit on a 2010 2.5 6 speed manual (BL)?

Asked by Aidan M | 03/30/2023, 01:28 AM | 1 answer(s)

Will this fit in a 2008 Mazda5?

Asked by Joshua Davian | 04/29/2022, 11:08 AM | 1 answer(s)

Can I add this on top of a CS front sway bar?

Asked by MANSUR Y MOOSA | 03/18/2022, 11:37 AM | 1 answer(s)

Will this fit a 2008 MZ3 Hatch (BK) AT?

Asked by charles | 06/24/2021, 11:45 PM | 1 answer(s)

Will this work OK with new coilovers on the front? Do you recommend with front coilovers?

Asked by Andrew | 05/17/2021, 05:41 PM | 1 answer(s)

I love the video and explanation. I wish it was still for $124.99 as stated in the video. :P

Asked by Cody Hausler | 08/28/2019, 08:13 PM | 0 answer(s)

Will this fit my Mazda 3 2006 2.3L sedan? (Not Mazdaspeed 3, regular 3, i am having a lot of wheel hop in 1st and 2nd gear launches

Asked by Harry | 02/09/2019, 11:57 PM | 1 answer(s)

Would this cause a “too stiff” factor if installed along with a rear sway bar? Or is it recommend to have both, to keep wheels planted on turns and wot??

Asked by Wesley | 04/02/2018, 04:52 PM | 1 answer(s)