Mazda 3 Strut Tower Bar | Mazda 3 Front Strut Brace

	CODE	Color	Availability	Price
	CODE:Axe-3-020-10	Polished	Availability:In stock	$179.99

Increase cornering ability and get more feedback from your Mazda3's suspension with the CorkSport Mazda 3 Front Tower Bar. Made from polished aircraft grade 6061 aluminum, the CorkSport Mazda3 Front Tower Bar will strengthen your Mazda by reducing flex, making the chassis more rigid.

The CorkSport Advantage:

Utilizes factory mounting points: Easily installs to factory mounting points with six bolts making installation a breeze
Precise Fit: Optimized using an extruded and CNC bent cross member with laser cut mounting plates
Extruded chambered bar design: For a light weight yet strong design for your Mazda3
One piece design: Maximizes stiffness and ensures easy installation
6061 aluminum: Finished in a nice Polished Aluminum with CorkSport logo
CorkSport Service and Support: Receive a two year limited warrantly, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone support

Install time 1/5 Difficulty 2 year warranty No CEL

HUGE improvement! Wow! Must have!

Chase12/11/2020, 02:12 AM

only 3 stars.
the quality is good, but for the people who have bought camber plate, the strut bar is close, so you always have to take off the strut bar to tune camber

Thomas Nguyen11/23/2018, 08:48 PM

Meh. It's ok. From Canada with shipping fees the quality of the bar is never worth the price.

The finish is bad and the.0.49$ sticker on it was not even applied straight. The Polish was scratched all the way from bad storage at corksport and badly uneven. A dent was already on it. And who ever says that it makes a huge difference on a skyactiv is only a placebo effect. Rear sway bar (that's a real upgrade & then front sway bar should be done first.

Only reason I give 2 star is because I like corksport and the staff are real awesome people.

Jonathan07/24/2016, 12:40 AM

I installed the strut bar on my 2013 mazda3 sedan, easy install. I noticed a big difference right away. Big improvement on sharp curves and ramps. And it looks great on my skyactiv.this is a great buy and worth every penny.

Terry Wright06/13/2016, 11:37 PM

Just installed today -- makes a huge difference in handling, was easy to install, and worth every penny.

Matt K03/10/2016, 07:15 PM

Easy to install, took less then hour. Absolutely makes a difference. Worth the investment for sure.

Steven Cerreta07/18/2015, 09:40 AM

Just installed this on my 07 GT Sedan, few good things and a few bad. First the good: Makes the engine bay look nicer, and I definitely noticed a change when going over bumps in the pavement, front end feels more solid and well put together, havn't tried excessive cornering yet as it's raining hard here so I can't speak to that, the welds look very well done also.

The bad: Mine came with a few dents in the strut bar, and the polish job was deplorable, one of the worst I've seen in awhile on aluminium, parts of it were shinier than others, and many scratches some pretty deep were left behind. Also the installation makes no mention of removing the factory strut tower plates, and makes it seem like you just drop the bar on, so that's what I did, checked clearance and it seemed okay, upon closing the hood, it bent my hood about an 1/8th of an inch upward on the passenger side toward the rear of the hood where it meets the fender, I was pissed to say the least, so I went back in and removed the factory plates, reattached the bar and spent a few mins readjusting the hood so it would once again fit flush on the passenger side. After doing all this the hood closes properly again.

(After doing some searching it appears that this has happened to others with the sedan, as it seems the bar was designed for the hatch and the hood has slight clearance differences with the sedan, Corksport should change the install documentation to include removal of the factory strut tower plates for sedan applications.)

Tyrel Lendzion06/13/2015, 03:29 PM

Well-built, looks fantastic, worth every penny, does it's job perfectly.

Bryan Anderson04/04/2015, 09:32 PM

Honestly I felt very little difference after the install of this bar. I believe that this has more to do with how well the car is built than the build quality of this bar.(2010 2.5 hatch with only 16K miles) The last car I had a strut bar on was a mid 90s 240sx and that was a night and day difference in terms of steering feel and mid corner kick back. The strut bar is just gorgeous to look at and the welds are very clean. Those with higher mileage cars where the subframe bushings has loosened up a bit may feel more of a difference. More under hood jewelery for me but would purchase again!

Andrew G.01/10/2015, 05:57 PM

This bar works as advertised and is simple to install. You notice a huge difference in ride quality, making the ride a lot less "crashy" and much more predictable. Cornering performance is also greatly improved. Worth the price, and a great simple upgrade.

I've written a more in-depth review of this part here: http://www.onefootonthegas.com/?p=73

Dylan Bolf02/27/2014, 03:07 PM

← Prev

12 3 4

Write a review

Will this fit a 2008 Mazda5?

Asked by Joshua Davian | 04/29/2022, 11:25 AM | 1 answer(s)

Will this strut tower bar fit with 2012 mazdaspeed 3 and has Corksport large core front mount innercooler

Asked by Charlie | 02/23/2022, 10:41 AM | 1 answer(s)

Will this fit a mazda 6 2009 GH?

Asked by Ray | 04/16/2021, 01:43 AM | 1 answer(s)

I no longer see the Mazdaspeed 3 variant of this. I have a front mount intercooler with undersided piping. Can I use this for my MS3? I'm impatient and don't want to wait for a revision for the MS3 version if one ever does come out. Also, if I upgrade to coilovers, will that affect the answer at all?

Asked by Cody Hausler | 08/28/2019, 08:28 PM | 1 answer(s)

I have adjustable coilovers on my 2013 Mazda 3 i and was wondering if this bar will fit over the adjustment knob

Asked by Nick sylvester | 11/05/2018, 06:47 AM | 1 answer(s)

Where is the 2013 mazdaspeed 3 front sway bar or is it no longer available?

Asked by Eden Cerna | 04/25/2018, 08:08 PM | 1 answer(s)

Will this fit a 2008 Mazda 3 Hatch (BK)?

Asked by Charles | 02/12/2018, 09:10 PM | 1 answer(s)

hi will this fit the 2011 mazda 3 2.5l

Asked by Nick Dean | 12/26/2017, 02:50 PM | 1 answer(s)

Will this fit on a mazda 3 mps 2007 first gen, as i see yes its fits, bud i've big top mount intercooler would that be a problem?

Asked by William de visser | 10/14/2017, 09:13 AM | 1 answer(s)

will this brace fit with a large top mount intercooler en will it fit with the batary box?

Asked by william | 10/06/2017, 07:00 AM | 1 answer(s)

Will this fit a 2005 mazda 3 SP23 2.3L

Asked by Kyle Wong | 07/22/2017, 04:16 PM | 1 answer(s)

Will this fit a 2005 mazda 3 SP23?

Asked by Kyle Wong | 07/22/2017, 02:59 AM | 1 answer(s)

I Currently Own this and have had it for a few years now and i can honestly say that i LOVE it, hate working on the engine with it on but that cant be helped, time to upgrade my OEM suspension that has 135k miles on it. Main question is will this Fit on the OEM Studs with the Corksport strut/spring combo with the Camber plate as well? My concern is that there is not enough thread sticking out to be able to get a grab on it with the nut as it is now, and adding the camber plate will make it impossible to get the nut on the stud.

Asked by Jonathan S | 07/21/2017, 06:40 AM | 1 answer(s)

Hi! Is there any hidden marks or sg else to help identify the genuineness of the strut bar? Thanks :)

Asked by rixxon | 01/20/2017, 02:12 PM | 1 answer(s)

Will this fit Mazda Protege 2000 BJ?

Asked by Sze Cheung Chung | 08/28/2016, 07:12 AM | 1 answer(s)

Installed a few days ago. Ever since some 'cloking " type of noise come out from front. I have hand tighted it about 1/4 turn pass snug. It is so basic that I have no idea what could have created this cloking. Any ideas?

Asked by Jonathan Marcil | 07/24/2016, 12:44 AM | 0 answer(s)

Some reviews stated that the Polish was poorly done. And that the bar came in contact with their hood passenger side. Were the problem solved?

Asked by Jonathan Marcil | 06/26/2016, 02:41 AM | 0 answer(s)

Will this go on my 2008 i sedan

Asked by Mike K | 06/21/2016, 12:39 AM | 1 answer(s)

Does this require removing the battery box lid on a permanent basis? I would like to see pics of it installed as well.

Asked by Brent | 04/04/2016, 07:24 AM | 1 answer(s)

I know this is for the mazda3 but could it by any chance fit my mazda protege? (1999 ES)

Asked by Fares | 03/29/2016, 06:18 AM | 1 answer(s)

So this will fit a 2008 Mazdaspeed 3 with a fmic.

Asked by Gino | 03/11/2016, 07:35 PM | 1 answer(s)

Will this strut bar fit on a 2006 sedan? (will there be adequate hood clearance?)

Asked by Marcus A. | 02/24/2016, 08:09 PM | 1 answer(s)

Is this compatible with 07 mazda3 2.0 i trim?

Asked by Jared M | 12/01/2015, 07:04 PM | 1 answer(s)

I am curious if this will fit on my 07 Mazdaspeed3 with a FMIC (no top mount obstruction)?

Asked by Christopher | 04/13/2015, 06:51 AM | 1 answer(s)

I also have BC BR coilovers installed, the bolts thread just enough through the nut but I feel as if its still unsafe. can you disconnect the two black braces the are directly underneath the strut bar so that you get more bolt clearance? Or is there any other way to make it work with BC BR coilovers...

Asked by Michael Fulmer | 03/31/2015, 10:14 AM | 1 answer(s)

Is this strut bar only available on polished now? Will the color black be available in the near future?

Asked by David | 03/20/2015, 11:59 AM | 1 answer(s)

I have bc coil overs the bolts are to short to tighten the strut bar what should i do to make it fit ?

Asked by Marcos | 02/19/2015, 09:55 AM | 1 answer(s)

will this fit 2012 mazda 3 1.6L 4dr japan made?

Asked by edge_ae510 | 02/05/2015, 07:51 AM | 1 answer(s)

I purchased a third party strut bar for my 2.0L skyactiv. Unfortunately there is a vacuum hose above the engine cover that rubs with the strut bar and as a result, causes a lot of rattling/weird noises. Does this bar have the same problem? How can I over come it?

Asked by Anthony | 11/02/2014, 08:30 AM | 1 answer(s)

New post