2014-2018 Mazda 3 & 2013-2017 Mazda 6 Oil Catch Can Kit

If performance and reliability are important to you then an oil catch can is a critical component for your 2014+ Mazda3, or 2013-2017 Mazda6 SkyActiv engine. Cylinder blow by gases and oil vapor build up in the engine crank case during normal and spirited driving situations. The OE design utilizes a PCV valve to pull these gases and vapors into the intake manifold to be recycled through the combustion process. A byproduct of this process is excessive buildup of contaminants in the intake manifold and cylinder head, especially on the top of the intake valves. This causes negative effects on performance and efficiency as well as potentially causing expensive servicing or repair. The CorkSport Oil Catch Can provides an additional step in this process to help filter out contaminates and vapors before they enter the intake manifold. #ZoomZoom!

Check out the installation instructions below. Share your performance review with the CorkSport community once installed!

The CorkSport Advantage

Performance Design

The CorkSport OCC dual chamber design separates the inlet and outlet ports by a center pass through disc. This promotes the incoming gases, vapors, and contaminates to spin and condense on the outside wall before the air passes through the separation disc. The resulting fluids pool in the bottom of the OCC for drainage.

Quality Materials

The OCC body, ports and dip stick are manufactured from 6061-T6 billet aluminum with internal and external brackets manufacturer from stainless steel for long lasting durability.

Easy Installation

All required parts for installation are included with the CorkSport OCC Kit.

Stainless steel mounting bracket
14mm braiding reinforced hose that is fuel and oil resistant
Mounting hardware

Installation note: If you live in an area which gets below zero you need to empty the catch can before the temperatures drop to maintain the functionality.
Replacing the OEM PCV system with an aftermarket Oil Catch Can System may allow smells of gasoline and oil to ventilate into the engine bay and thus the cabin depending on HVAC settings; this is normal of an Oil Catch Can System especially during idling situations and after shutting off the engine. If excessive smell is noticed, inspect hose connections and drain the catch can.
Recommended to inspect & verify the PCV is working correctly when installing the OCC Kit. Replace if needed.

Additional Features

Compatible with: 2014-2018 Mazda 3 and 2013-2017 Mazda 6
Designed & Developed in America: CorkSport Mazda Performance is resides in Vancouver, Washington and is located in the beautiful Pacific Northwest.
CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

How To Install the Mazda Oil Catch Can

It will take you Approx. 2 hour to install.

2 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

A necessary upgrade especially if you do frequent short drives or are going for a forced induction setup. Emptying this every oil change is a fairly accurate instruction as you should see a half cup to a full cup of drainage. This product clearly does it's job as long as you follow the provided instructions.

Joshua Sturtevant02/29/2024, 08:45 PM

If you want to ensure that your motor stays in tip-top shape, and avoid any bad contaminants getting thrown back into your motor this OCC is perfect. Super solid construction, an ample amount of hose included for the install, and very simple yet effective mounting solution. I can drain my OCC in less than 5 minutes by just jacking up the corner of my car enough for me to get underneath where it sits, removing a couple screws on the underbody, and cracking open the drain valve while holding a cup underneath. After seeing what comes out of that thing, I am so glad I installed it!

Dimitri Giannopoulos08/24/2023, 06:49 PM

Great Quality and instructions make it easy to install. Took me about 2 hours but I also wanted to make sure that I did everything correctly. Otherwise car has been running perfect now for 3 weeks and it seems to be doing it's job at catching any of the extra crud.

William Ward08/10/2019, 04:47 PM

I am amazed at all the crap which comes out of the catch can that would have gone into the intake manifold. Best investment on my 3 so far.

Shocked!05/07/2019, 06:58 AM

Write a review

Would this fit on a CX-3?

Asked by Conrad | 06/23/2023, 10:27 AM | 1 answer(s)

Does this product include a filter or baffling?

Asked by Raul | 03/10/2023, 09:24 AM | 1 answer(s)

Hi! I live in Canada and was wondering if there will be problems with the OCC during winter if I drained it before the temperature drops below zero?

Asked by Hugo | 05/07/2022, 06:54 PM | 1 answer(s)

Will this product function on my 2019 Mazda3 base sedan? I can’t seem to find an oil catch can specifically for the 2019 and would really love one from your brand!

Asked by Dilan Morales | 05/15/2021, 05:57 AM | 1 answer(s)