Save An Additional $15
Part Orders Over $399!
Use Code: CSBonus15
Save $10 on Part Orders Over $449.99!
360-260-2675
Vancouver, WA

HRS

M-TH 9A-5P | F 9A-12P | SA-SU CLOSED

Shipping Estimator Shipping Estimator

2004-2013 Mazda 3 Rear Adjustable Sway Bar

Old price: $249.99 Ā 
Price: $229.99
You save: $20.00Ā (8%)
Price in points: What are Points?230 points
Save $20.00
Axl-3-071-12
Add to wish list
Remove the tendency to overpower the front tires under hard cornering and minimize traction robbing body lean with the CorkSport Mazda 3 Rear Adjustable Sway Bar. Compressing inside suspension, the CorkSport Mazda3 Rear Sway Bar effectively increases the spring rate on side of the suspension which is compressed most and its adjustability allows you to fine tune the handling. Each Mazda 3 sway bar includes machined 6061-T6 aluminum sway bar brackets which are more durable than the stamped steel design common with other sway bars and look sharp with an anodized black finish.

The CorkSport Advantage



Mazda 3 rear sway bar adjustable end points






Adjustable: Two end link attachment points to change the stiffness between 94% and 175% stiffer than stock.







Single Piece CorkSport Sway bar







Single Piece: A single piece is used to create the Mazda3 rear swaybar which adds strength by removing weak points such as welds.





Bushings are included with CorkSport's Mazda sway bar brackets.





Billet Sway Bar Brackets: Superior bracket design with grease fittings for easy servicing with 90a durometer polyurethane, CorkSport brackets and bushings are the last you will need. Once installed, the reduced bar movement gives you extra confidence when taking corners.







The CorkSport Advantage:

  • Extra Value: Includes Billet Sway bar brackets, at $79.99 value.
  • One piece design: CNC bent for precise fit and made from 25mm 4130 Steel.
  • Adjustable: Two adjustable locations for the end links to install allowing you to change how much the bar uses the other side of the suspension. 94%/175% stiffer than stock on the Mazda 3.
  • Made in the USA: Engineered and manufactured by CorkSport in Vancouver, Washington.
  • Durable blue or black powder coated finish: can survive the winter driving in areas where roads are salted for snow and ice.
  • CorkSport Service and Support: Receive a two year limited warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone support.



  • Install time Ā Ā  Ā Ā  Ā Ā Ā  Ā Ā  Ā Ā Ā  2/5 Difficulty Ā Ā  Ā Ā Ā Ā Ā Ā  Ā Ā Ā  2 year warranty Ā Ā  Ā Ā  No CEL





Three years of driving with the swaybar. Then bracket decided to shear off. hmmm, you guys should provide a thicker bracket next time.



CorkSport Reply:Give us a call, we would like to hear what happened, 360-260-2675
The mechanic said it was easy to install. I still haven't driven hard enough to test things out completely. That will come over time.
Edit to my earlier review. it was not my stock end links that were noisy but the bushings that came with the bar. the grease that came with it wore off after only a few weeks and squirting more in through the nipples till it came out the sides did nothing to quite it down so I replaced the grease with a few rounds of teflon tape and its been quite for months since. Next time I install a bar I am skipping the grease altogether and going straight for the tape.
I just put this in today and WOW. Love the turn it gives make such a HUGE difference over the stock one. Really good instructions as always and would recommend to everyone to get.



Only took about 40 min to install.
I love the turn in this bar gives me. The car is much more responsive now, great improvement at auto X. Only down side is that it makes my stock end links creak and groan like an old man's knees on every low speed turn on the stiffer setting. hoping new end links will fix this. Could not use the stock end links on the softer setting because they were hitting the control arm and making at thunk over every bump.
Noticed the difference right away and only on the softer setting. Didn't like the "Corksport" decal right where I needed to put the mounting hardware, it didn't survive the install. Maybe a painted on one would work better, not that I care, you'd have to be a mouse to be low enough to see it, haha.
Easy install. Took me less than 45 mins with one car jack and a couple of jack-stands.

The handling increase is amazing and on the stiffest setting compliments the CS Front Strut Bar superbly. I handle corners like nothing, anymore.



However I have one question I need to ask of CorkSport.

I'm looking to trade up from my current 2010 Mazda 3 to a 2010+ Mazdaspeed 3. Will this rear swaybar be compatible on the Speed 3?



CorkSport Reply:You can install the swaybar on a MS3 but it will not be much of an improvement over the stock bar. We recommend getting the Mazdaspeed 3 specific bar which offers a bigger upgrade.
Took about 30 minutes to install. Works great. Car feels more solid and very stable around corners.
I got this installed today on my 13 Mazda3 SkyActiv. Great product! The black bar looks like stock, but thicker (and adjustable). Easy install. I am running on the lowest setting, and it has great balance around corners. If you want to swing the rear around, you'll probably need to go for the firmer setting. I can't wait to wear out the stock tires (or run over something sharp) so I can put on some stickier rubber and really take advantage of this bar. Great product, and great support from the CorkSport team.
Got it.

Love it.

GET IT!
Write a review

Will this bolt up to a 2012 MAZDA 3 6speed SkyActiv with no modifications to the parts?

Asked by ben | 11/29/2023, 03:01 PM | 1 answer(s)
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.


Recommended Products Recommended Products