MZR 2.3 DISI Turbo | Silicone Boost Tubes

CODE	Silicone Color	Availability	Price
CODE:Axl-6-210-red	Red	Availability:In stock	$69.99
CODE:Axl-6-210-blue	Blue	Availability:In stock	$69.99
CODE:Axl-6-210-black	Black	Availability:In stock	$69.99

Silicone Boost Tubes for the DISI MZR

Specifically designed and tested for the Mazda MZR DISI 2.3L turbo engine*, the CorkSport DISI Silicone Boost Tubes are made from six layer silicone coupler that contains five layers of reinforcement for a strong yet flexible connection that will allow for ideal flow into and out of the intercooler.

Custom Formed for Perfect Fitment

The CorkSport DISI Silicone Boost Tubes have been designed to be a clamp-in replacement for the stock non-reinforced rubber hose

Six Layer Silicone Part

Contains five layers of reinforcement for a strong yet flexible connection that will not deteriorate over time and crack like the conventional stock rubber hose

T-Bolt Clamps Included

The Mazdaspeed boost tubes include 4 correct sized t-bolt clamps to make the installation look great and match your other CorkSport brand intake components.

Available in four color options

Complete the look of your engine bay by matching the hose color to your CorkSport SRI silicone connectors and boost tubes

Vehicle Fitment:2007-2009 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, and 2007-2012 CX7
*Does not fit the early model Mazdaspeed 6 with the early cold pipe design.
Developed in America: Designed, tested, and validated in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support:Receive a 2-year warranty, full-color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support.

Check Out Boost Tube Breakdown Blog!

Note: Blog is for a related product.

How To Install Your CorkSport Silicone Boost Tube

It will take you one hour to install the CorkSport Silicone Boost Tube with our easy-to-use instructions.

4 Hour Install Time

3/5 Difficulty

2-Year Warranty

No CEL

Black ones look nice. Fits perfectly, Will ensure no boost leak for years to come.

Barry White06/04/2013, 09:27 AM

Super easy to install, and gives the motor a good look. Way better than stock. Would recommend to anyone with a few extra bucks!

Cameron05/18/2013, 08:42 PM

Extremely good product. Unfortunately the larger tube didn't work for my engine but I used a Dremmel and cut it down to the right size. Much better support and a superb product! :)

Andrew Berhorst04/28/2013, 01:57 PM

Although my stock boost tubes were fine, I wanted to upgrade them to these fine silicone tubes for two reasons: a) I could see how the stock tubes could collapse or expand under heavy boost, and these thick and nice looking silicone tubes were my number one choice, b) the recirculation boost tube was rubing against the CS SRI, and I wanted to strengthen it by replacing it as well with the CS boost tube.

Installation was a breeze, the tubes are better than any other brand I've seen, the clamps are way more secure and air-tight than the stock ones, and I can feel the more steady boost levels. The recirculation boost tube, although slightly different in shape than the stock one, has a curve that prevents any rubbing with the CS SRI.

Definitely two-thumbs up!

Antonis Marinos06/02/2012, 01:08 AM

Easy install, looks way better than stock. Perfect fit

Kua Vang05/08/2012, 08:09 PM

Quality was great, very thick/strong construction. Looks good under the hood. Fit perfect.

CoryT09/26/2011, 02:33 PM

Very easy install! These hoses are 10 times better than OE hoses! Plus the t-bolt clamps make for a great upgrade!

Casey Lusk08/13/2011, 10:13 PM

Good looking hoses with great install instructions (as always).

Perfect fit.

Wolly697310/31/2010, 07:13 AM

← Prev

12

Next →

Write a review

I have a speed 6 neck and but I also have a spare speed 3 down neck. Is there a significant issue if I switch the necks out to make the coupling work? Horsepower or performance issues?

Asked by David Hernandez | 09/10/2023, 08:02 AM | 0 answer(s)

Will these fit a 2012 gen 2 speed 3 ?

Asked by Paul | 06/07/2023, 03:09 AM | 1 answer(s)

What size is the ID on these?

Asked by Ryan | 01/22/2021, 06:49 AM | 1 answer(s)

What are the actual dimensions/measurements for these tubes? i.e. inside and outside diameter, length, angle, etc.

Asked by Noel Underwood | 08/26/2019, 01:06 PM | 1 answer(s)

Any noticeable HP gains?

Asked by Mike | 08/05/2018, 08:12 AM | 1 answer(s)

i have a pu with a SU tmic (yea yea i know, got a good deal, i would have preferred to have a cs tmic to keep the engine bay looking stock). the SU tmic doesnt line up correctly with the stock boost tube that goes to the turbo, thus causing a cut from the clamp to happen in the stock boost tube and due to the improper fitment is causing my synapse sb bpv to have those vacuum/boost lines rub on the hood.... my question... are these exactly the same size as stock or are they a tad bit longer than stock? or is there a way i could order the boost tube to the turbo slightly longer to compensate for the poor fitment of the SU tmic?

Asked by Michael Grimm | 01/01/2017, 05:38 PM | 1 answer(s)

so i had a boot gauge installed and they had to cut into my boost tube to install the t-clamp. anyway i think i might have a boost leak. Will this replace the stock boost house ans fix my problem?

Asked by Gabe | 02/07/2016, 09:54 AM | 1 answer(s)

Will these fit a gen 1?

Asked by Enrique Razo | 11/20/2015, 08:38 PM | 1 answer(s)

Can I put these on my car if it's stock

Asked by Caezar Tarango | 11/04/2015, 08:32 AM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

2007-2013 Mazdaspeed 3
2007-2013 Mazda MPS3
2007-2012 Mazdaspeed Axela
2006-2007 Mazdaspeed 6
2005-2007 Mazda MPS6
2005-2007 Mazdaspeed Atenza
2007-2012 Cx7 Turbo