Mazda 3 Performance Short Ram Air Intake

One of the easiest and most beneficial power performance enhancements you can do for your vehicle, the Mazda 3 Performance Short Ram Intake replaces your factory airbox with an open intake system allowing more air into the intake chamber. Engineered with exacting tolerances, the CorkSport Mazda 3 Short Ram Intake includes our precision machined MAF housing made from billet aluminum, a durable dry flow air filter and custom reinforced silicone connector. The CorkSport 2010-2013 Mazda 3 Short Ram Intake has been designed for the 2.0L standard and now SkyActiv engines. In initial testing with the 2.0 Liter SkyActiv engine, the CorkSport Mazda 3 Short Ram Intake netted peak gains of +5 HP and +6 lb torque at the wheels.

The CorkSport Advantage:

Available for 2.0 Liter Standard and SkyActiv* Gasoline Engines: In addition to the standard 2.0L engine, CorkSport has developed a new power series intake that will perform with the all new SkyActiv engines
Improve Gas Mileage and Power: In initial testing on the SkyActiv engine, the CorkSport SRI showed peak gains of +5 HP and +6 lb torque at the wheels.
Avoid Unwanted Check-Engine Lights: The MAF housing is precision machined from billet aluminum to prevent air leaks and inaccurate readings.
Durable Dry Flow Air Filter: Reusable and water resistant, this unique non-woven filter media does not require oil to filter and trap dirt and actually sheds dirt under engine vibration unlike cotton-gauze which holds contaminates until you clean the filter
Custom Reinforced Silicone Connector: Constructed from multi-layer nylon braid to provide more strength and power and a smooth internal transition for less turbulence and optimal flow
Replacement Air Filter is: Available Here
CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

*Can be used with the gasoline engine only. Does not work on diesel engines. With the CorkSport Intake installed on the SkyActiv engine, at higher RPM's you may hear a slight ticking from the opening and closing of the injectors. This is completely normal and is what helps increase torque and fuel economy.

Please make sure of the model of 2.0 engine you have in your Mazda 3. The 2.0 Standard and 2.0 Skyactiv intakes are not interchangable.

Note: This intake is not CARB approved for the state of California.

Install time 1/5 Difficulty 2 year warranty No CEL

Better throttle response and a little more hp when passing on the highway. Its not going to make your mazda3 skyactiv a track car but it will make your car unique and sounds great. Happy with my purchase and better than expected.

Chris05/17/2018, 01:27 PM

Sounds Great. Feels a bit more aggressive. Revs up faster.

Joe Minichiello03/23/2018, 11:42 AM

Super easy to instal and sounds amazing at open throttle. I plan on doing the exhaust over the summer so can't wait to hear how it sounds when that's done

Stephen03/21/2018, 08:24 PM

Awesome intake, very easy to install, and has an awesome sound to it!

Jorge Solis08/02/2017, 10:39 PM

Sounds beautiful, gives it a more aggressive tone to it, especially in the higher rpm. I love it. Cant wait to combo this with the corksport exhaust.

Ivan Alvarez06/02/2017, 05:04 PM

Ordered and installed my intake about two years ago and I've been loving it ever since. The engine noise changes drastically for the better, doesn't sound ricey at all! Highly recommend this intake to someone looking to make a first purchase for their Mazda 3.

Riley Smith05/15/2017, 09:45 AM

Product was extremely easy to install. Also looks great (especially with a painted battery cover). Recommended+

Carlos Velasquez04/30/2017, 10:09 AM

← Prev

12

Next →

Write a review

Does it fit on a non skyactiv 2.0 litre 2011 mazda BL

Asked by Dominic Martin | 05/22/2023, 11:58 PM | 1 answer(s)

What are the exact dimensions of the filter thay comes with this system?

Asked by Ethan | 04/13/2021, 08:10 AM | 1 answer(s)

I just recently added the SRI to my Mazda 3 Skyactiv. On the OEM air intake, there was a tube going from the radiator into the tubing to the throttle. With the new unit, that has now left an opening coming from the radiator. Do I need to do anything about this?

Asked by Josh B | 04/01/2021, 03:41 PM | 1 answer(s)

Does this intake work with Mazda 3 Skyactiv models that were sold new in California? I read that 3's sold new in California are slightly different in their emissions systems and thus aren't compatible with most of these intakes, specifically one I was looking at from K&N. My 3 is part of test group DTKXV02.0NC1.

Asked by Jordan | 03/23/2021, 06:46 PM | 1 answer(s)

Does this come with air straightener?

Asked by Thomas Clark | 12/30/2020, 07:38 AM | 1 answer(s)

But WHY isn't the airbox available? I see that you have them for other models? Can it be specially ordered? Not as though it's a complicated thing to make since y'all have the equipment and design.

Asked by Jeff | 07/30/2020, 10:29 AM | 1 answer(s)

Are the components made in North America or overseas?

Asked by Scott | 04/14/2020, 08:08 PM | 1 answer(s)

If the air box isn’t available anymore then what could be the best alternative method for upgrading our air intake? Not having an air box for this makes keeping that hot air out complicated.

Asked by Chris | 04/14/2019, 09:31 AM | 1 answer(s)