For Mazda 6 aftermarket performance parts, the CorkSport Turbo Boost Tube can help your car acheive higher boost, and better reliability. The boost tube also fits on the Mazda CX-5 and CX-9. Through testing, we found that the stock 1-ply rubber boost tube expands and contracts at stock power levels, which is less than ideal. No worry, the CorkSport upgraded 5-ply reinforced silicone hose is much stronger and stops unwanted expansion from your turbo Mazda boost pressure which eliminates a potential failure down the road whether your car is stock or modified.

Performance Inspired

The CorkSport Performance Boost Tube Upgrade for the Mazda 2.5T engine is made to give you the most out of your car at an affordable price. The OEM tube expands 12% at 20psi (peak pressure we have seen at intercooler outlet) when cold, and even more when heated up by the engine due to the use of flexible rubber with 1 layer of reinforcement. This expansion robs your car of consistent boost levels and hurts throttle response. The CS boost tube expands 3x less than OEM when cold and will stay consistently strong at higher temps and elevated boost levels due to its high temp silicone and 5-layers of reinforcement.

Future Proof Your Ride

The stock Mazda boost tube for the 2.5t engine is made from very similar, if not the same material, as the OEM Mazdaspeed boost tubes which were prone to cracking & failure as they age. It’s easy to see the 2.5T having much of the same problem down the road, causing boost leaks and a poorly running car. The CorkSport boost tube eliminates this issue as silicone is longer lasting, stronger, and more resistant to the elements than regular rubber. If this is the first mod in your build, the CS boost tube is ready for elevated boost levels that could otherwise cause the OEM tube to fail prematurely.

Quality Hardware

Each CorkSport Performance Boost Tube comes with upgraded T-bolt clamps. They offer more secure clamping than the OEM worm gear style clamps and a wider clamping area to ensure a good seal. Plus, they are made from polished stainless steel for a great look and high corrosion resistance.

Compatible with: 2016+ Mazda CX-9 & 2018+ Mazda 6 equipped with the 2.5L Turbo SkyActiv-G
Designed in America: in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.
NOTICE: The boost tube does not work with our FMIC kit or Intercooler Piping Kit! If you plan on getting those parts in the future skip the boost tube.

How To Install Your CorkSport 2018+ Mazda6 2.5L Turbo Boost Tube

It will take you one hour to install the CorkSport Mazda6 Turbo Boost Tube with our easy-to-use instructions.

1 Hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Check Out the Blogs Related to this Product!

OEM Cold Side Breakdown

Full System OEM Breakdown

Boost Tube Testing

will this work with a 2023 cx50 turbo?

Asked by Ric La Mere | 02/28/2025, 06:33 AM | 1 answer(s)

Will this work with my 2017 Mazda CX-5 Sport 2.5 liter (No Turbo) ?

Asked by LT Edwards | 04/13/2024, 08:04 PM | 1 answer(s)

Does this fit the 2019 CX-5 2.2L Skyactiv-D diesel engine? It looks a bit too short in the pictures.

Asked by Scott | 11/11/2023, 07:17 PM | 0 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

2016+ Mazda CX-9 2.5L Turbo Sky-G
2018+ Mazda 6 2.5L Turbo Sky-G
2018+ Mazda CX-5 2.5L Turbo Sky-G

Eric Blumensaadt

03/29/2021, 03:09 PM

Comment
I have to say this CS boot tube really DOES give me better throttle response, both at standing start tip-in and for passing. I'm impressed!

Austin Hull

10/05/2020, 07:56 PM

Comment
Kind of a pain to install but definitely worth it, the tube is very sturdy. I had a problem with the tube popping off after install that shut my entire car down... my bad. Beware of that also.

Philip Joly

06/26/2019, 05:30 PM

Comment
I liked the heftier construction of the CS tube compared to the OEM one, and it looks great once in place. That said, I agree with other reviews here: A) the OEM clamp up by the throttle body looked like it was purposely installed to make it nearly impossible to remove, and B) you need small hands and arms to do this. By the time I was finished my forearms and knuckles looked like I'd been in a fight. I guess I was, and the car won!

Bing

04/10/2019, 10:38 PM

Comment
I installed it, the low speed throttle response is more sensitive

Tim

04/02/2019, 09:58 AM

Comment
The boost tube is definitely a lot heftier than the stock tube. I was surprised how easily you could collapse the OEM one. The install wasn't too bad, but it's very tight for anyone with medium to larger arms/hands. My knuckles, hands & forearms got beaten up during the process.

Feels like it may have a little more throttle response, but I haven't done any real hard runs with it yet. I got it for more steady boost levels, and for future proofing...with bigger mods down the road. And for only $90, not a bad mod, IMO.

James Wells

04/01/2019, 07:30 AM

Comment
Better build quality than the original. Now they need to just release a turbo inlet pipe and tubing to replace the rest of the factory intercooler piping for those of us who do not wish to buy a new IC nor need one.

Sean

02/02/2019, 08:50 AM

Comment
I could definitely feel the difference in throttle response at lower RPMs. I also have the CorkSport Cat-back Exhaust and Short Ram Intake installed. The OEM is so thin and flexible, I literally hold the end, blow into it and watch it expand. If you’re a guy with bigger arms and hands it is difficult to almost impossible access the Boost Tube location in the engine compartment following the provided instructions. Enlisting the help of a friend who can work in tight spaces could be a big help. Also, my OEM hose clamps were in the worst possible position to loosen them. When I did get a ratchet on them, I only had one click of ratchet movement. I am satisfied with the purchase and I am looking forward to the release of the Front Mount Intercooler Kit.

← Prev

12

Next →