2014-2018 Mazda 3/Mazda 6 Cold Air Box

	CODE	Car Model	Availability	Price
	CODE:AXM-6-120-10	2013+ Mazda 6	Availability:In stock	$149.99
	CODE:AXM-6-120-10	2014+ Mazda 3	Availability:In stock	$149.99

Put your intake air temperatures in check with the CorkSport Cold Air Box designed for the 2014+ Mazda 3 and 2014-2017 Mazda 6 CorkSport Short Ram Intake. The Cold Air Box sources cool air from the OEM location without the restriction of the OEM air box. #ZoomZoom!

Check out the installation instructions below. Share your performance review with the CorkSport community once installed!

The CorkSport Advantage

Performance Advantage

Cold air is denser air, and denser air makes more power. Upgrade your current CorkSport Short Ram Intake or pair the two together for OEM intake air temperatures without the OEM restriction.

Premium Materials

Manufacturer from ABS, the Cold Air Box is durable and heat resistant while nicely blending into the engine bay.

OEM Fit

Utilizing the OEM rubber isolators provides an easy installation and flexible mounting to allow for engine movement.

Additional Features

Compatible with: 2014+ Mazda 3 and Mazda 6
2.0L & 2.5L: Designed for the CorkSport Short Ram Intake and fits the Mazda 3 & 6 2.0L/2.5L.
Designed & Developed in America: CorkSport Mazda Performance is resides in Vancouver, Washington and is located in the beautiful Pacific Northwest.
CorkSport Service & Support: 2 year limited warranty, full color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

How To Install Your CorkSport Cold Air Box

It will take you one hour to install the CorkSport Cold Air Box with our easy-to-use instructions.

1 Hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Super nice and quality made box to look factory!

Brandon04/18/2018, 08:30 PM

I am disappointed.

The plastic does not match other products under the hood. Im from Europe,and here the police is very strict about aftermarket parts that dont have TÜF certificate. So it would be better if the plastics matched with original mazda plastics. Also CS logo on the lid, i would rather have a removable sticker.If you are not from Europe you dont have to worry about that.

Another disappointing thing is the lid. It doesnt have a seal.I had to buy sillicone to seal it. Why screws for the lid? It would be easyer if it just snaps in place,like oem box.Would look better too.

At low rpm and full throttle, box vibrates very loudly. Not a nice sound. Fixed it by sealing the lid and reinforcing the inside of the box.

The biggest problem is water. When is raining, alot of water is pulled in, rain and muddy water. Still figuring out how to fix this.

I hope this comment will serve to improve products in the future.

MP04/15/2017, 02:39 PM

I got a cold air box to go with my short ram intake to try to get fresh cold air to my engine and protect the filter from the sand/salt/freezing rain/snow that my car gets bombarded with over Canadian winters.

I'm really happy with the air box! The fit and finish is great, the box feels well made and robust, and it offers great protection for the filter.

A few things I would recommend is that it would be nice is Corksport included stainless steel fasteners for the air box, and if there was some sort of weather stripping to seal the lid. I bought my own stainless steel bolts to combat corrosion, and have been looking for a rubber edge seal to put around the top of the air box. Lastly, it would be nice of there was some way to ensure the silicone intake didn't rub against the air box to prevent chaffing.

JMJR02/25/2017, 07:44 AM

Great product nearly matches stock plastics, looks good under the hood. The biggest downfall is the rattling and added vibrations. Since this will not be something you open up and check daily I would recommend that you use red locktite on the lid screws in order to keep the lid tightly sealed maybe even silicone the lid shut it will dampen the vibrations significantly I did this after a few days do to vibrations car feels almost stock. Before I used lock tight the vibrations got worse and effected the drive greatly and I nearly lost a screw do to harsh vibrations ( this is why I recommend red locktite) Still needs to be tuned though the intake does add a little more pull up top but definitely needs a tune to maximize efficiency. Last but not least it does make the cars induction note much more pronounced so if you're not a fan of that I'd suggest going with a dry panel filter and calling it a day. The OEM intake has a strange design that runs a very long length in order to quiet induction sound. I enjoy the sound but it may not be for others.

Quintin Drayton10/21/2016, 01:10 AM

Hey, I installed this on my 2015 Mazda 6 iTouring. I have had a huge amount of shaking in the bay and when i recently checked it out... all of the previous screws that they came with in the package had all fallen loose inside the box. My brother also has a 2015 Mazda 6 with an intake like me. But he didnt buy the coldbox and im loosing to him everytime..... What Gives? PLEASE HELP

Arden Manuel10/12/2016, 03:30 PM

My tuner recommended another brand of SRI, but the part throttle pumping noise was just too much for my older ears. CorkSport's FAQ said their Cold Air Box would accommodate my SRI, order was placed immediately. Install was a breeze, noise is now reduced to a less obtrusive level of NVH.

Fit and finish are good, looks really good there in the engine bay. Money well spent, I didn't have to cobble something together and hope it was effective.

Mason Leach08/03/2016, 09:20 PM

Ive had this installed for some months now and i like it, i like that it fits in the OEM mounts. I just hate that it vibrates and one corner rubs on the hood and makes a very anoying rattle noise.

Jasiel Malpica07/10/2016, 10:33 PM

I have had the Cool Air Box installed for just over a week. I am very happy with how they incorporated the Mazda designed airflow source. I can feel that there is less bog down and heat swap when driving.

The engineering is good. My only complaint is that there is significant amount of vibration at times. Definitely a plus though performance wise.

Fat Ralphy04/26/2016, 10:11 AM

← Prev

Write a review

Will this fit on a 2016 CX-5, 2.5L?

Asked by Chris | 01/27/2024, 03:13 PM | 1 answer(s)

I am curious to know if this has any type of drain hole for water pulled in from hood intake area? Design looks like it would fill up with water.

Asked by Off2Geo | 04/12/2024, 07:37 PM | 1 answer(s)

Will this fit a 2021 Mazda6 NA?

Asked by Mason | 09/10/2024, 06:26 PM | 1 answer(s)

Dear Team Will this cold air box fit a 2019 mazda 3? Because I really want to buy and install for my mazda 3, looking forward to your reply, thank you

Asked by BAIQUAN LIN | 02/12/2023, 05:38 PM | 1 answer(s)

Is there color options for the box?

Asked by Hector P | 09/07/2022, 08:40 AM | 1 answer(s)

Will this box restrict airflow opposed to no box?

Asked by Carson | 03/28/2022, 03:50 PM | 1 answer(s)

Hey there, i have the 1.5 l engine on my mazda 3, so i need to take the short ram intake from the Mazda 2 for the 1.5 l. Does the intake https://corksport.com/mazda-2-short-ram-intake.html fit with this box on my mazda 3?

Asked by René | 01/26/2022, 09:06 AM | 1 answer(s)

Cuál es la medida del embalaje en el que se envía.

Asked by Jaime Rodríguez | 12/14/2021, 05:30 PM | 1 answer(s)

Will this fit the 2018 Mazda 6 sport ?

Asked by Christopher J Mallery | 11/27/2021, 06:16 AM | 1 answer(s)

Will this cold air box dampen the added noise from the SRI? I want the noise so if this dampens it I might not buy it.

Asked by Isaac | 11/08/2021, 05:21 PM | 1 answer(s)

Curious on the odds this fits the CX3. same exact engine but im sure the mounting points would be the only difference.

Asked by Joe Libraro | 06/25/2021, 07:07 PM | 1 answer(s)

What size are the thumbscrews? Mine feel off due to vibrations I'm assuming.

Asked by Christopher Arguelles | 03/30/2021, 03:36 PM | 1 answer(s)

Does this fit the 4th Gen Mazda3 2.5 l?

Asked by Bruce Fortier | 03/10/2021, 05:22 PM | 1 answer(s)

I have a 2012 Mazda 3 skyactiv and was wondering if you offer a cold air box for my car or if I would be able to retrofit this one to fit my car

Asked by Nicholas Kendrick | 12/01/2019, 09:20 PM | 1 answer(s)

I am planning to get a Corksport Mazda 2 1.5l short ram intake for my 1.5l Mazda 3 2017 hatch, will this cold air box fit with the 1.5l short ram intake in my car?

Asked by Dominic | 03/15/2019, 07:53 AM | 1 answer(s)

Would this fit around the mazda 6 turbo intake? Im surprised that it doesnt come with one.

Asked by Tobias | 03/14/2019, 04:20 AM | 1 answer(s)

What is the power gain over stock when combined with the Corksport SRI? Has the lack of a lid seal been corrected?

Asked by Alan | 02/12/2019, 07:08 PM | 1 answer(s)

I see two different boxes in the photos above. How can I make sure I get the box for my 2.5 2014 mazda 6?

Asked by Alex | 01/30/2019, 10:03 AM | 1 answer(s)

Hello i have this INJEN SHORT RAM AIR INTAKE POLISH FOR 2014-2015 Mazda 3 2.0L +13hp. Will the injen fit in this airbox? Thank you.

Asked by Mike | 01/20/2017, 10:14 PM | 3 answer(s)

I have a 2014 mazda6 sport. Will it fit my stock intake?

Asked by Alex Anderson | 09/26/2018, 08:21 AM | 1 answer(s)

I've had the cold air box for about a year, I noticed one of the thumb screws with washer is missing. Do you offer replacements for this?

Asked by Kevin | 09/03/2017, 04:27 AM | 1 answer(s)

Does the small intake port pose any flow restrictions for the 2.5L? Any plan on increasing the size of the intake port or adding an additional one for increased flow?

Asked by Chris S. | 07/29/2017, 09:21 AM | 1 answer(s)

Will this accent the sound of the SRI even further? In other words, will it make my JBR intake louder? Thanks!

Asked by David | 12/11/2016, 05:54 PM | 0 answer(s)

I bought from you CX-3 Power Series Short Ram Intake 2.0L and I want to ask if I buy this airbox, if will fit into my CX-3? Thanks

Asked by TomT | 10/02/2016, 02:00 PM | 0 answer(s)

I bought from you CX-3 Power Series Short Ram Intake 2.0L. I want to ask. When i buy this Cold Air Box, will be fit for my car (mazda cx-3)?

Asked by Tomas Trlica | 10/02/2016, 11:44 AM | 0 answer(s)

Does it work for the 2015 Mazda 3 2.0L

Asked by Juan | 10/01/2016, 10:28 AM | 0 answer(s)

Do you plan to make a cold air box for the CX-5? or is this compatible?

Asked by JR | 08/08/2016, 09:41 PM | 1 answer(s)

Any thoughts of offering this in carbon fiber? At least the top part perhaps? Could such a thing be special ordered?

Asked by John Rubenstein | 08/15/2016, 03:16 PM | 1 answer(s)

Will this work with the Corksport SRI on a CX-5? Has anyone tried fitting this onto a CX-5?

Asked by Dino | 06/24/2016, 01:08 PM | 1 answer(s)

Is it compatible with the K&N 69-6032TS intake? (2015 mazda 3 gt 2015 2015 2.5l)

Asked by Cody | 04/25/2016, 01:20 PM | 1 answer(s)

I have a 2010 mazda 6 with the 2.5l. I currently have the cork sport intake on it. Would this box with the second gen mazda 6?

Asked by John. | 04/04/2016, 05:44 PM | 1 answer(s)

Anyone hearing a high pitched vibration post installation? 2015 Mazda6 iSport. Instructions followed to a T. Checked and double checked. Just curios before I redo it.

Asked by Scott Kozik | 04/01/2016, 02:55 PM | 1 answer(s)

Is there a comprable item to for the CX3 RAI?

Asked by Lukasz | 03/19/2016, 07:20 AM | 1 answer(s)

This is exactly what I need... for my 2012 Skyactiv. Any chance you'd be able to adapt this design for that?

Asked by Corey | 03/14/2016, 01:48 PM | 1 answer(s)

would your cold air box fit on a injen short ram intake?

Asked by Francisco R. Ada | 03/12/2016, 03:55 PM | 1 answer(s)

Does this decrease the throttle noise any?

Asked by john | 02/28/2016, 07:46 PM | 1 answer(s)

Does this product work with K&N 69-6033TTK Air Intake?

Asked by Martin Occor | 02/28/2016, 07:45 PM | 1 answer(s)

Will the JBR SRI fit in this?

Asked by Andrew Royappa | 02/27/2016, 09:37 AM | 1 answer(s)

I currently have K&N cold air intake installed. Will this enclosure be compatible with that, or is this specific to CS cold air intakes? Thank you

Asked by Dan | 02/27/2016, 12:01 AM | 1 answer(s)

I have a 2015 Mazda 6, do you think this will fit on with the K&N Typhoon intake? If you guys don't mind sending me a sample I can Test it out hehe.

Asked by Minh Tran | 02/25/2016, 07:04 PM | 1 answer(s)