2010-2013 Mazdaspeed 3 Carbon Hood Scoop

Step up the look of your 2010-2013 Mazdaspeed 3, while increasing the cold airflow through your top mount intercooler (TMIC) with the latest version of CorkSport"s Carbon Fiber Hood Scoop. #ZoomZoom!

The sweet lines of the CorkSport Hood Scoop is sure to set your Speed3 apart from the crowd and turn heads. We engineered it for an exact fit, so it integrates nicely with your MS3. We also went to the extreme to ensure our re-issue of the hood scoop surpassed our quality standards at no extra cost to you. We have to say, we really outdid ourselves on this one.

Looking for an alternative if you plan on painting or vinyl wrapping the hood scoop? Check out this listing for more details.

Check out the video and installation instructions below. Share your performance review with the CorkSport community once installed!

2010-2013 Mazdaspeed 3 Carbon Fiber Hood Scoop Video

The CorkSport Advantage

Material: Made from fiberglass and overlayed with real carbon fiber cloth. Sealed with UV-resistant, epoxy resin.

CorkSport's Mazdaspeed3 carbon fiber hood scoop has a superb finish.

CorkSport's Mazdaspeed3 carbon fiber hood scoop has a superb finish.

Finish: Polished carbon fiber to a mirror-like finish.

CorkSport's Mazdaspeed3 carbon hood scoop installed.

Performance: The CorkSport Carbon Fiber Hood Scoop has a 52% larger opening compared to the factory hood scoop, providing an extra dose of fresh cool air to the TMIC.

Additional Features

Strength and quality: The CorkSport Mazdaspeed Carbon Fiber Hood Scoop is handcrafted using the finest materials.
Larger scoop: More than 1 inch larger than the factory hood scoop.
Improved airflow: Allow your engine to open up and breathe the cool, outside air.
Upgraded Top Mount Intercooler: Designed to work well with the upgraded Mazdaspeed TMIC.
CorkSport service and support: full color installation instructions, all necessary components, and knowledgeable telephone support at 360-260-2675.
Note: We take pride in our work and products. Your CorkSport Carbon Fiber Hood Scoop is unique to you. Slight imperfections are normal, such as tiny bubbles or wavy weaves. They are not a reflection on the quality of the product or functionality.

How To Install Your Mazdaspeed 3 Hood Scoop

It will take you about 30 minutes to install the carbon fiber hood scoop with our easy-to-use instructions.

Install time 1/5 Difficulty No CEL

Although this thing does not come with the neoprene washers as it should, this hood scoop is amazing. It gives a nice mean look to the front end and gives my intercooler more air to breathe. I love the hood scoop and how clean it fits onto the hood. I have not driven it in the winter/spring yet, so there is no review on how the studs and nuts will be due to salt and water getting on them.

Sam Livingston08/17/2024, 10:49 PM

Loving the hood scoop. Looks like it should have out of the factory. Perfect amount of height, not to tall or too short. Carbon fiber looks super clean, love the addition to my speed3. I do think that there is more air hitting it cause the temps are about 10 degrees cooler than before. Couldn’t be happier and get a rice crispy treat to boot! Love yalls products and customer support. You can tell the CS team love their products and the people they sell their stuff to!

Tim H03/31/2023, 12:09 PM

Purchased a blemished unit Corksport was selling and had it reclearcoated as advertised by Corksport. After a harsh winter, the hood scoop is still looking brand new. The screws seem good as new even with the salted roads they faced. Hardest part was sourcing rubber washers to keep the part insulated from the hood. Still 5/5!

Zach Nieman07/15/2021, 07:43 PM

Absolutely awesome finish and really stands out. Really good quality carbon that I won’t have to worry about considering the heat from the engine and intercooler... perfect direct fit. Minutes of work and it’s in...

Shane Mouton06/22/2019, 11:10 PM

Scoop went on easy and looks great, plus I got a hand written message with it which was a nice touch :)

Patrick04/16/2019, 05:55 AM

Easy to Install, install mine on my 2010 Speed3. your factory washers will be useless, install new hood scoop without washers after talking to tech support. Also you will probably have to get new push clips, 2 of mine crumbled on removal. Looks awesome.

Tom Neighbors09/25/2018, 01:49 PM

LOVE the look. Easy install. But please beware- winter/snow drivers - the bolts WILL RUST. i have had 4 screws completely fall out. Not too happy about this. Best i got was 5% off a new one. Wish they would have done something since i see this as a design flaw. I am giving it a 3 because i love the look, -2 stars for Customer Service with CS. Boo.

Kyle05/16/2018, 08:26 AM

Great quality, very simple installation, MAKE SURE TO HAVE SOME BACKUP NEOPRENE WASHERS, because the factory ones stick and rip, or crumble, and are just sh** all together. Other then that everything was great, and looks good!

Scott Lubell11/30/2017, 07:19 AM

I have a VIS Racing carbon fiber hood and didn't know if the CorkSport hood scoop would fit. Since I have just about every part that CorkSport makes and have never once had a fitment or quality issue, I decided to take the risk and place the order for the scoop. The VIS hood took about 10 minutes to modify in order to fit the CS scoop. Just had to widen the holes for the CS scoop screws. I also tested the scoop in my factory hood and didn't have any fitment issues. The CS scoop looks incredible and the quality far surpasses the original VIS scoop that came with my hood. Thanks CorkSport for another incredibly high quality product!

Ben Nicholson10/28/2017, 02:56 PM

Great looking scoop, very sturdy, it has lasted through a couple runs over 145 mph unlike some of the other parts of the body. you can see the scoop from the inside of the vehicle and I am very pleased with this product.

Ian Adams10/05/2016, 10:27 AM

← Prev

12 3

Next →

Write a review

Can I also fit this on my speed 6?

Asked by Stijn Janssen | 08/02/2022, 04:32 AM | 1 answer(s)

Do you guys know where to get replacement hardware for the hood scoop? My OEM scoop currently has none and need to get the hardware before getting the CS scoop. Thanks a ton!

Asked by Mike | 11/24/2021, 02:11 PM | 1 answer(s)

Can you tell me the area of the opening?

Asked by Robert Clarizio | 03/26/2019, 12:57 PM | 1 answer(s)

What are the measurements of the opening?

Asked by Tyler Sopo | 08/06/2019, 04:54 AM | 1 answer(s)

how much does this hood scoop weigh??

Asked by joshpena | 11/25/2017, 06:46 PM | 1 answer(s)

Does this come with a "grill"? With a larger opening, is it more likely to catch more debris into the engine bay and TMIC?

Asked by Vincent Tenaglia | 07/06/2016, 03:38 PM | 1 answer(s)

Do you guys provide a mesh insert in the opening of the scoop so that debris cannot enter the engine bay through it?

Asked by Donald Sheridan | 09/13/2016, 07:56 AM | 1 answer(s)

Will these be available without the carbon fiber? Want mine to get paint matched cuz cf doesn't go it's my gold theme

Asked by Derrick | 03/24/2016, 12:57 AM | 1 answer(s)

Can I preorder this scoop?

Asked by Dave | 03/07/2016, 07:15 AM | 1 answer(s)

Do I have to get it clear coated when I get it. I just bought it and would like to know before it arrives.

Asked by Jared Grunes | 07/11/2015, 05:48 PM | 1 answer(s)

How smooth is the transition from the back of the scoop (opposite the opening) to the hood? If there is a gap or abrupt edge, how big is the gap or edge?

Asked by Mike | 04/13/2015, 10:28 AM | 2 answer(s)