Reduce the throw of your shifter and improve precision and performance with the Mazdaspeed 3 Short Shift Plate. Providing a 20% to 32% throw reduction, the Mazda3 Speed Short Shift Plate is designed for spirited driving and will reduce throw while keeping the height of the OEM shifter unchanged. The installation takes a mere 15-20 minutes with some simple hand tools and will provide a serious improvement to the quality of your shifting experience.

The CorkSport Advantage:

Counterweight Included: The best value on the market, the CorkSport kit comes complete with counterweight for added responsiveness
Made from CNC Machined Steel Plate with powder coated finish for a long lasting durability
Adjustable: Reduce the throw by 20% to 32% to customize your shifting experience
Self Locking Bolts: Pre-applied locking patch bolts included with shifter plate
CorkSport Support and Service: Receive full 2 year warranty all of the needed installation hardware, and knowledgeable telephone support. Takes 15-20 minutes to install
Fitment: 2007-2013 Mazdaspeed 3

How To Install the Mazdaspeed 3 Short Shift Plate

It will take you Approx. 1 hour to install.

1 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Awesome product. Easy install. Less than 15 min if that... 40% red throw is nice!

Richard Yuen04/08/2013, 07:41 PM

Love it Bottom line! I have mine set at about the 30% mark and it feels so much better. cheap great improvement!

Daniel Wagle04/07/2013, 05:58 PM

Put this on at the same time as my CAI since everything was already open and exposed. Running at 40% on my Gen2 Speed3 and I love it. No more missed shifts from second to third, everything is right where I feel like it should be. Thanks CorkSport, job well done.

Michael Gear04/05/2013, 09:20 PM

Great piece. Easy install. Have it set somewhere around 30% due to issues with cables rubbing at 40% on 07'MS3. But Corksport instruction clearly state not all vehicles run the same so fitment issue may occur depending on modifications. so Yes great piece and throw difference is noticeable and crisp.

Delgado Jeffrey04/04/2013, 09:25 AM

Flat out amazing difference! I already had the bushing kit installed and while that made a very positive change, this kit makes the tranny feel like it should. Perfect snick-snick feel every enthusiast wants.

Install was insanely easy, even with removing the factory air box. Another winner from Corksport!

Jason03/21/2013, 07:36 PM

NICE PRODUCT ... WORKS GREAT .. EVEN @ 40%. Bought this along with the shifter bushing kit an had both installed in about an hour .. quick fast an easy install even with the factory airbox in place .. no issues no problems AGAIN GREAT JOB CORKSPORT .. THANK YOU ..

ROBERT

YORK,PA

Robert Doll03/17/2013, 03:28 PM

I hate to even post this cause most all of Corksports products are great, but my experience with this short shift plate was disappointing. After I installed it, I sat in the car and started working the gears..mine was as notchy as can be..I moved the pin to see if it would smooth out some..not much difference at all. I didn't bother with trying to drive the car, I just went ahead and removed it. :(

Roy Medley03/16/2013, 06:53 PM

This combined with the bushing kit is nothing short of amazing. super easy to install too. only took about 10 minutes if that. I agree with Jose and Zachery as well. it just clicks right into gear.

Evan Jeffers03/11/2013, 12:57 PM

Shipping in time. It took me 10 minutes to install. I placed a 40% (WOW) and everything works fine. Very good product for the price. CorkSport thank you!

Alain Boucher03/06/2013, 11:22 AM

Wow fast shipping & item was packaged very very well installed it in my 2012 MS3 @ 40% throw works great and also had very good instructions that I was able to install it in just 15 minutes. It feels so much better and more of a crisp feeling.

Jason Herrera03/04/2013, 08:05 PM

← Prev

1 2 3 456 7

Next →

Write a review

Does this fit on the 6 speed 2010 2.5L Mazda3

Asked by Jeremy | 09/25/2021, 06:14 PM | 1 answer(s)

Would this fit on a 6-speed Mazda 3 2012 Skyactiv Hatchback?

Asked by William | 06/05/2019, 01:35 PM | 1 answer(s)

In one response you say it will fit both and another that it's Gen specific. Is it a universal plate for both Gen 1 and 2 Speed 3's?

Asked by Travis | 10/05/2018, 11:17 AM | 1 answer(s)

Is there a difference between the short shift plates for a gen 1 speed3 vs a gen 2 speed3. Or are they universal for the speed3 platiform?

Asked by Pete T. | 10/10/2017, 05:03 PM | 1 answer(s)

Will this work for a speed6?

Asked by Austin | 08/22/2016, 09:56 PM | 1 answer(s)

If I have a \factory air box will this unit fit? I read instructions on the JBR product and it requires rubber risers on the factory box after installation.

Asked by William | 08/18/2016, 06:48 AM | 1 answer(s)

Does this fit a 2006 speed 6?

Asked by Seth | 08/01/2016, 05:14 PM | 1 answer(s)

Can this be used in conjunction with the short shifter you also sell?

Asked by Sean | 06/30/2016, 05:07 PM | 1 answer(s)

I have a 2013 six speed mazda 3 hathback, will this work for that model??

Asked by Fernando Anselmi | 06/10/2016, 09:39 PM | 1 answer(s)

I installed this about a week ago. 1st, 3rd, and 5th seem very short... But 2nd 4th and 6th still feel the same... I set it just barely over from full left. Using the OEM counter weight. Any suggestions/advice on how to make all the shifts feel the same? Or is it supposed to be this way?

Asked by Luis Camacho | 06/04/2016, 04:50 PM | 1 answer(s)

Does this work in a regular 2011 Mazda 3 I sedan??

Asked by Jonathan | 01/31/2016, 05:00 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits

2007-2013 Mazdaspeed 3

2007 Mazdaspeed 3
2008 Mazdaspeed 3
2009 Mazdaspeed 3
2010 Mazdaspeed 3
2011 Mazdaspeed 3
2012 Mazdaspeed 3
2013 Mazdaspeed 3

Richard Yuen

04/08/2013, 07:41 PM

Comment
Awesome product. Easy install. Less than 15 min if that... 40% red throw is nice!

Daniel Wagle

04/07/2013, 05:58 PM

Comment
Love it Bottom line! I have mine set at about the 30% mark and it feels so much better. cheap great improvement!

Michael Gear

04/05/2013, 09:20 PM

Comment
Put this on at the same time as my CAI since everything was already open and exposed. Running at 40% on my Gen2 Speed3 and I love it. No more missed shifts from second to third, everything is right where I feel like it should be. Thanks CorkSport, job well done.

Delgado Jeffrey

04/04/2013, 09:25 AM

Comment
Great piece. Easy install. Have it set somewhere around 30% due to issues with cables rubbing at 40% on 07'MS3. But Corksport instruction clearly state not all vehicles run the same so fitment issue may occur depending on modifications. so Yes great piece and throw difference is noticeable and crisp.

Jason

03/21/2013, 07:36 PM

Comment
Flat out amazing difference! I already had the bushing kit installed and while that made a very positive change, this kit makes the tranny feel like it should. Perfect snick-snick feel every enthusiast wants.

Install was insanely easy, even with removing the factory air box. Another winner from Corksport!

Robert Doll

03/17/2013, 03:28 PM

Comment
NICE PRODUCT ... WORKS GREAT .. EVEN @ 40%. Bought this along with the shifter bushing kit an had both installed in about an hour .. quick fast an easy install even with the factory airbox in place .. no issues no problems AGAIN GREAT JOB CORKSPORT .. THANK YOU ..

ROBERT

YORK,PA

Roy Medley

03/16/2013, 06:53 PM

Comment
I hate to even post this cause most all of Corksports products are great, but my experience with this short shift plate was disappointing. After I installed it, I sat in the car and started working the gears..mine was as notchy as can be..I moved the pin to see if it would smooth out some..not much difference at all. I didn't bother with trying to drive the car, I just went ahead and removed it. :(

Evan Jeffers

03/11/2013, 12:57 PM

Comment
This combined with the bushing kit is nothing short of amazing. super easy to install too. only took about 10 minutes if that. I agree with Jose and Zachery as well. it just clicks right into gear.

Alain Boucher

03/06/2013, 11:22 AM

Comment
Shipping in time. It took me 10 minutes to install. I placed a 40% (WOW) and everything works fine. Very good product for the price. CorkSport thank you!

Jason Herrera

03/04/2013, 08:05 PM

Comment
Wow fast shipping & item was packaged very very well installed it in my 2012 MS3 @ 40% throw works great and also had very good instructions that I was able to install it in just 15 minutes. It feels so much better and more of a crisp feeling.

← Prev

1 2 3 456 7

Next →