Reduce the throw of your shifter and improve precision and performance with the Mazdaspeed 3 Short Shift Plate. Providing a 20% to 32% throw reduction, the Mazda3 Speed Short Shift Plate is designed for spirited driving and will reduce throw while keeping the height of the OEM shifter unchanged. The installation takes a mere 15-20 minutes with some simple hand tools and will provide a serious improvement to the quality of your shifting experience.

The CorkSport Advantage:

Counterweight Included: The best value on the market, the CorkSport kit comes complete with counterweight for added responsiveness
Made from CNC Machined Steel Plate with powder coated finish for a long lasting durability
Adjustable: Reduce the throw by 20% to 32% to customize your shifting experience
Self Locking Bolts: Pre-applied locking patch bolts included with shifter plate
CorkSport Support and Service: Receive full 2 year warranty all of the needed installation hardware, and knowledgeable telephone support. Takes 15-20 minutes to install
Fitment: 2007-2013 Mazdaspeed 3

How To Install the Mazdaspeed 3 Short Shift Plate

It will take you Approx. 1 hour to install.

1 hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

Great

José Rivera santos04/06/2025, 01:22 PM

Even with the CorkSport short shifter installed. , it shortens the throws considerably. Awesome improvement abd very easy installation.

SSgt B03/04/2025, 10:55 AM

If you want a notchy short throw do this plate plus the tougher bushings and a weighted shift knob. Best bang for your buck by far and have zero complaints with my shifter assembly. Feels almost clunky in a good way. Never slip gears and faster shift times are always good.

Kaden Zhang03/27/2017, 12:54 PM

The short throw shift plate was the best transmission mod of my life! It doesn't take me a year to shift into gear anymore. I did the full 32% or 40% on the shift plate and isn't difficult to shift into gear at all. Pretty good mod to start out with! Install could be done by 5 month old babies. Corksport you never disappoint!

Jason Womble03/04/2017, 05:57 PM

Forget remapping and intakes buy this first as it the best improvement to my car so far. Easy to fit and makes everything feel tighter and lighter. Very happy.

Scott05/07/2016, 10:24 AM

Install was easy. If you're running a short ram, removing it will give you better access. I set mine just right of center. Throws are ALOT shorter. 2nd to 3rd at 6k puts you right into full boost in 4th. I used the provided weight instead of retaining the OEM weight. Might swap back though. The lighter shifts just don't feel like they are landing like the heavier ones did. Going to run it for a few weeks and see if it feels more natural.

All in all, quality product. Does exactly as it says.

MooseKnuckler08/03/2015, 06:19 PM

Does exactly what it says it would do. Love the short shifts. Shift are more crisp. Easy install.I highly recommend this if you want to reduce your shift throws.

J. M. Savoie07/15/2015, 07:21 PM

Took me about 30min to install, hardest part was removing the linkage off the ball joint. Other than that! a Great Product! I have it just below the full 40% decrease which is perfect for me! Combine with the shifter bushings, and the feel is 100% better! Thanks again Corksport!

Alex Garabedian05/12/2015, 11:46 AM

I installed this while at work still on the clock and no one noticed I even left. Very simple install thanks to the directions that came with it (even easier if you already have a SRI). Reduced my shifts to the lowest % (40% decrease I believe). First couple miles of driving took a little getting used to but after that throws feel great! Awesome product highly recommend.

Alexander Ratsimbazafy04/22/2015, 04:36 PM

This is an amazing mod!! It feels great when shifting with the corksport weight. The shifts are much more shorter and quicker. I recommend this to anyone who has a mazdaspeed.

Abraham Ortega03/18/2015, 04:52 PM

← Prev

12 3 4 5 6 7

Next →

Write a review

Does this fit on the 6 speed 2010 2.5L Mazda3

Asked by Jeremy | 09/25/2021, 06:14 PM | 1 answer(s)

Would this fit on a 6-speed Mazda 3 2012 Skyactiv Hatchback?

Asked by William | 06/05/2019, 01:35 PM | 1 answer(s)

In one response you say it will fit both and another that it's Gen specific. Is it a universal plate for both Gen 1 and 2 Speed 3's?

Asked by Travis | 10/05/2018, 11:17 AM | 1 answer(s)

Is there a difference between the short shift plates for a gen 1 speed3 vs a gen 2 speed3. Or are they universal for the speed3 platiform?

Asked by Pete T. | 10/10/2017, 05:03 PM | 1 answer(s)

Will this work for a speed6?

Asked by Austin | 08/22/2016, 09:56 PM | 1 answer(s)

If I have a \factory air box will this unit fit? I read instructions on the JBR product and it requires rubber risers on the factory box after installation.

Asked by William | 08/18/2016, 06:48 AM | 1 answer(s)

Does this fit a 2006 speed 6?

Asked by Seth | 08/01/2016, 05:14 PM | 1 answer(s)

Can this be used in conjunction with the short shifter you also sell?

Asked by Sean | 06/30/2016, 05:07 PM | 1 answer(s)

I have a 2013 six speed mazda 3 hathback, will this work for that model??

Asked by Fernando Anselmi | 06/10/2016, 09:39 PM | 1 answer(s)

I installed this about a week ago. 1st, 3rd, and 5th seem very short... But 2nd 4th and 6th still feel the same... I set it just barely over from full left. Using the OEM counter weight. Any suggestions/advice on how to make all the shifts feel the same? Or is it supposed to be this way?

Asked by Luis Camacho | 06/04/2016, 04:50 PM | 1 answer(s)

Does this work in a regular 2011 Mazda 3 I sedan??

Asked by Jonathan | 01/31/2016, 05:00 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits

2007-2013 Mazdaspeed 3

2007 Mazdaspeed 3
2008 Mazdaspeed 3
2009 Mazdaspeed 3
2010 Mazdaspeed 3
2011 Mazdaspeed 3
2012 Mazdaspeed 3
2013 Mazdaspeed 3

José Rivera santos

04/06/2025, 01:22 PM

Comment
Great

SSgt B

03/04/2025, 10:55 AM

Comment
Even with the CorkSport short shifter installed. , it shortens the throws considerably. Awesome improvement abd very easy installation.

Kaden Zhang

03/27/2017, 12:54 PM

Comment
If you want a notchy short throw do this plate plus the tougher bushings and a weighted shift knob. Best bang for your buck by far and have zero complaints with my shifter assembly. Feels almost clunky in a good way. Never slip gears and faster shift times are always good.

Jason Womble

03/04/2017, 05:57 PM

Comment
The short throw shift plate was the best transmission mod of my life! It doesn't take me a year to shift into gear anymore. I did the full 32% or 40% on the shift plate and isn't difficult to shift into gear at all. Pretty good mod to start out with! Install could be done by 5 month old babies. Corksport you never disappoint!

Scott

05/07/2016, 10:24 AM

Comment
Forget remapping and intakes buy this first as it the best improvement to my car so far. Easy to fit and makes everything feel tighter and lighter. Very happy.

MooseKnuckler

08/03/2015, 06:19 PM

Comment
Install was easy. If you're running a short ram, removing it will give you better access. I set mine just right of center. Throws are ALOT shorter. 2nd to 3rd at 6k puts you right into full boost in 4th. I used the provided weight instead of retaining the OEM weight. Might swap back though. The lighter shifts just don't feel like they are landing like the heavier ones did. Going to run it for a few weeks and see if it feels more natural.

All in all, quality product. Does exactly as it says.

J. M. Savoie

07/15/2015, 07:21 PM

Comment
Does exactly what it says it would do. Love the short shifts. Shift are more crisp. Easy install.I highly recommend this if you want to reduce your shift throws.

Alex Garabedian

05/12/2015, 11:46 AM

Comment
Took me about 30min to install, hardest part was removing the linkage off the ball joint. Other than that! a Great Product! I have it just below the full 40% decrease which is perfect for me! Combine with the shifter bushings, and the feel is 100% better! Thanks again Corksport!

Alexander Ratsimbazafy

04/22/2015, 04:36 PM

Comment
I installed this while at work still on the clock and no one noticed I even left. Very simple install thanks to the directions that came with it (even easier if you already have a SRI). Reduced my shifts to the lowest % (40% decrease I believe). First couple miles of driving took a little getting used to but after that throws feel great! Awesome product highly recommend.

Abraham Ortega

03/18/2015, 04:52 PM

Comment
This is an amazing mod!! It feels great when shifting with the corksport weight. The shifts are much more shorter and quicker. I recommend this to anyone who has a mazdaspeed.

← Prev

12 3 4 5 6 7

Next →