Shipping Estimator Shipping Estimator

2007-2013 Mazdaspeed 3 Downpipe

 
Price: $349.99
Price in points:  What are Points? 350 points
Axl-6-113-10
+

Get maximum turbo performance and dramatically increase torque with the Mazdaspeed 3 Power Series Downpipe. The CorkSport Mazdaspeed3 downpipe was expertly designed to replace the restrictive element in the Mazdaspeed 3 stock downpipe

The CorkSport Advantage



CorkSport 80mm or 65mm Flange ChoicesFitment Choices: Pick the 65mm flange for stock fitment (it will also work with all aftermarket exhausts), or 80mm flange for the CorkSport Cat Back exhaust and true 3" piping. Either way, mandrel bent piping is used to create smooth exhaust flow for dramatic increases in power.











CorkSport Downpipe and Intake Dyno ChartImproved Power: With just an intake installed you can gain up to 50 HP more by adding the long catted downpipe, or short downpipe and racepipe.











CorkSport Short Catless DownpipeCorkSport Short Downpipe: Replaces just the downpipe section but not the racepipe for a cost effective solution that works with the stock racepipe, or aftermarket. For lasting corrosion resistance and reduced heat transfer to the engine bay, the CorkSport MS3 downpipe uses polished 3ƒ? 304 stainless steel and features TIG welds that offer superior arc and weld puddle control for a cleaner appearance and precise weld bead control











CorkSport Long Catted Downpipe Replaces the Downpipe and Racepipe SectionsThe CorkSport Long Catted Downpipe: Replaces both the stock Downpipe and Racepipe sections. With two O2 bungs and an included high-flow metallic flexible catalytic converter the CorkSport Long Catted Downpipe can be run withouth risk of an unwanted check engine light, or overspool on the turbo due to lack of backpressure.









The CorkSport Advantage

  • Remove exhaust flow restriction: by replacing the single most restrictive element of the exhaust, the downpipe
  • Polished 3" 304 stainless steel piping: for corrosion resistance and reduced heat transfer
  • Unique Divorced Waste-gate Design: Reduces exhaust flow disturbances related to waste-gate operation and boost spikes
  • Mandrel bent: for a smooth exhaust flow and solid power increases
  • TIG welds: for a stronger more seamless connection
  • Genuine CorkSport Look: Stylish etched stainless steel CorkSport logo plate
  • Gains in power up to 21 WHP: when installed on otherwise stock Mazdaspeed
  • CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

  • WARNINGS:
    *Installation of the CorkSport Downpipe with High-Flow Cat replaces the downpipe and racepipe.

    *Installation of the downpipe without the high-flow catalyst option will activate CEL on 2010+ models and is not legal for street use.

    *Catted Downpipe Option is not legal for California residents and some other locations.

    *Installation of a downpipe requires a High Pressure Fuel Pump upgrade to maintain your engines safety.

    How To Install:



    Install time                   4/5 Difficulty               2 year warranty       No CEL for Catted Option

    More Video Clips



    Does buying just the downpipe replace your cat? Or does the race pipe replace the cat?
    If i have a stock exhaust and a 65mm race pipe from Corksport, will the catless downpipe fit my setup? It's indicated that it only comes in 3"...
    Hey I have the corksport cutback 80mm will the high flow car bolt on directly to the exhaust?
    so this is not legal in california??!
    So for people in Cali you can't purchase the catted down pipe? Any way to get rid of the CEL for those without the cat?
    Which size connector for future OBX ehaust after first using stock exhaust?
    Will this match up with my HKS 75mm catback?
    I want to purchase the downpipe with the high flow cat however, what is the OEM fitment size for the second gen mazdaspeed3? 65mm or 80mm?
    I currently have stock exhaust and will eventually get CSCB. If I order the 65mm now, will I be able to switch it to the 80mm? I hear quite a few comment on speeders just getting the DP and loving the sound and performance. Any suggestions?
    I have an '09 MS3 with your SRI... Warranty is up so time for the toys...Is there a specific fuel pump upgrade you recommend running with the downpipe? Also as long as I get the catted model will I be ok running this in NY?



    CorkSport Reply:We will have our pump internals available on Feb 7th. We are not sure on the local laws for emissions, I would talk to your local emissions tester.
    Write a review

    I have a 2009 'Speed3-Will the short pipe (downpipe only) trigger a CEL? Will I require a tune after installing it? Plan on using stock racepipe (has stock cat). Will I be required to use aftermarket hpfp? Thanks for the help.

    Asked by Thomas | 02/05/2022, 02:49 PM | 1 answer(s)

    Is it a good idea to heatwrap the downpipe before installing?

    Asked by Bradley Kistler | 12/29/2021, 09:20 AM | 1 answer(s)

    I'm having a hard time visualizing the size and shape of 5-bolt flanges. Would this fit on a GT2860RS?

    Asked by Raymond Harper | 11/11/2021, 02:01 PM | 1 answer(s)

    What'll it take to fit one of these on a gen 2 mazdaslow 3 i?

    Asked by Caiou | 02/20/2021, 02:16 PM | 1 answer(s)

    Does the long pipe have 2 cats on it? You mention it comes with your race pipe but I see the flexible mesh which isn't on the race pipe I found on your website. I only really want a catted downpipe and a cattless race pipe. Thanks!

    Asked by Dylan Nightingale | 03/18/2021, 10:03 AM | 1 answer(s)

    Will the Divorced catted downpipe fit a cst4?

    Asked by Alexander Arencibia | 01/29/2021, 10:32 PM | 1 answer(s)

    I need a new downpipe for my 2008 Mazdaspeed 3 the one currently in my car is beginning to fail. Which should I get if all I need is the downpipe it self?

    Asked by Caleb | 06/08/2020, 01:41 PM | 1 answer(s)

    Will the 60mm catted downpipe work with cobb catback exhaust for gen 2 mazdaspeed or I need to get the 80mm.

    Asked by Pa Yang | 03/15/2020, 06:44 AM | 1 answer(s)

    Will the 80mm long down pipe fit onto the oem exhaust?

    Asked by Cory Hill | 11/24/2018, 12:19 AM | 2 answer(s)

    Does this Downpipe fit both the BL and BK models?

    Asked by Adem S | 04/30/2019, 05:46 AM | 1 answer(s)

    I have a corksport catback exhaust and now i want a long catted downpipe I was wondering what size flange should I get 65mm or 80mm?

    Asked by Randy Lopez | 03/01/2019, 09:58 PM | 1 answer(s)

    Hello. I have a cp-e triton catback exhaust system and was wondering what size flange I would need to mate the corksport long catted downpipe to it. The 65mm or the 80mm?

    Asked by Josh | 02/27/2019, 04:57 PM | 1 answer(s)

    If I run the BNR S4 V3 with this downpipe, is it possible that I see any issues with the wastegate flapper making contact with any part of the downpipe? I've seen very mixed things online and can't find consensus anywhere.

    Asked by Brett | 09/28/2018, 02:05 PM | 1 answer(s)

    I want to get the long down pipe with the high flow cat, but I fant afford the CBE right now. What do I need to hook it up to the stock exhaust on the gen 2?

    Asked by Chris | 05/24/2018, 09:08 PM | 1 answer(s)

    Would it be safe to run the catted downpipe, fuel pump internals, and FMIC that I purchase from you guys without a tune? Or do I need a tune if I am only looking to upgrade these components?

    Asked by Fabian | 04/08/2018, 03:32 PM | 0 answer(s)

    Hello! I currently have the COBB Catback Exhaust but once i found you guys I have pretty much been a Corksport only fan, my question is will your downpipe work okay with the COBB catback?

    Asked by Dillon Rice | 12/02/2017, 05:24 AM | 1 answer(s)

    Will the long catted downpipe bolt up to a CNT cat back exhaust?

    Asked by Nick | 01/23/2018, 12:36 PM | 1 answer(s)

    I recently purchased the hatless downpipes and racepipe that bolts onto the stock exhaust my question is how many exhaust donuts do I need to order. I know I need one donut for my racepipe but on your instructions for the downpipes it says I need to purchase 2 but don't see were the second one goes only were the first one goes witch is attache to the end of the downpipe.

    Asked by Raul | 10/14/2017, 08:33 PM | 1 answer(s)

    Since I am using the stock catback exhaust and am getting the 65mm downpipe if I were to purchase the corksport catback at a later date would I have to repurchase the downpipe or will the 65mm one still bolt up to the corksport catback exhaust?

    Asked by Evan | 07/21/2017, 05:32 AM | 1 answer(s)

    Is there a significance in power between the 65mm long catted and 80mm long catted? Will the 80mm bolt fine with the stock cbe?

    Asked by Jason | 10/24/2016, 10:49 PM | 1 answer(s)

    Hi, i have a full stock exaust can i juste change the SHORT downpipe only ? Does The SHORT downpipe can be fixed with à STOCK ricepipe ? Thx for your answer

    Asked by Antoine | 11/26/2016, 12:09 AM | 1 answer(s)

    I plan on purchasing this high flow catted downpipe for my car but im worried about the exhaust smells might be annoying. When I bought the racepipe, didn't notice no exhaust smell but I mean none but since this dp replaces a high cell cat with a low cell cat, that's why my concern.

    Asked by Eliezer Perez | 12/03/2016, 07:54 PM | 0 answer(s)

    Hi, On your short Downpipe for mazdaspeed 3 2007, how many 02 sensors has got your short downpipe ??

    Asked by Antoine | 11/16/2016, 06:12 AM | 2 answer(s)

    Which would i need with the Ultimate Racing Catback exhaust, the 65mm or 80mm?

    Asked by Paul Shaver | 08/05/2016, 07:36 AM | 1 answer(s)

    Does it require a tune if I run your high-flow cat? I have your stage II full intake and fuel pump internals.

    Asked by AZG | 06/11/2016, 01:32 PM | 1 answer(s)

    I'm looking to go stage 2. How much power will I lose by mounting this to stock exhaust instead of a full exhaust. I would be using the catted option

    Asked by Kyle Croutch | 06/02/2016, 06:56 PM | 1 answer(s)

    Good morning CS. I have 2 questions. I currently have a Cobb SS 3" Catback installed on my Gen 2 MS3. Which DP do I need. The 65mm or the 80mm fitment. And second, do you currently have the one that I would need in stock? The last time I ordered a Catback and it was on back order for 3 months. Thanks guys.

    Asked by Brendan | 05/13/2016, 01:00 PM | 1 answer(s)

    I currently livehave the long catted downpipe on my 2008 gen. I just bought a 2010 gen2 can i use my old downpipe on my new car? Thanks again great part.

    Asked by Sherwin | 03/30/2016, 08:25 PM | 1 answer(s)

    Where do you get your ots maps for the accessport?

    Asked by Keith | 03/11/2016, 10:23 AM | 1 answer(s)

    im interested in the down pipe for my ms3 but my only thing that is holding me back is if will it pass maryland emissions? i have looked around if anyone around had passed but never got a straight answer.

    Asked by Manuel Angel | 02/21/2016, 10:21 PM | 1 answer(s)

    Would the non catted downpipe fit the 80mm if I soon bought the race pipe and mid pipe

    Asked by Tarango | 02/03/2016, 11:57 AM | 1 answer(s)

    I'm getting the hpfp and I'm fully stock besides the ap and fuel pump. Well would I have to run a certain stage 1 map or do I go straight to the stage 2. Any map recommendations

    Asked by Caezar | 02/03/2016, 11:53 AM | 1 answer(s)

    Would my engine be okay with the dp of I didn't get the upgraded fuel pump

    Asked by Caezar Tarango | 11/02/2015, 08:32 PM | 1 answer(s)

    How loud is the car/do you get drone on the highway when you have an intake, fuel pump, and the long down pipe installed? It is my understanding that the CBE would mostly change the loudness Thanks, Eric

    Asked by Eric Burbank | 09/14/2015, 12:22 PM | 3 answer(s)

    Will this downpipe fit a GTX3582r?

    Asked by Chase | 07/02/2015, 06:39 PM | 1 answer(s)

    I'm interested in buying a log catted down pipe and I was wondering, will the 85mm one fit the 3" CPE cat back exhaust system?

    Asked by David | 05/14/2015, 01:01 PM | 1 answer(s)

    Hey guys. On my accessport I am running a stage 1 93 tune. The map I chose from Cobb was from the corksport intake, TIP, and internals. Is there any map that would also support the down pipe to get the most out of it?

    Asked by Allen | 04/01/2015, 02:14 PM | 1 answer(s)

    I have a 2006 Mazda 3 will it still fit? Because I saw you guys had the full exhaust system but nothing separately for the 2006.

    Asked by Mason | 03/10/2015, 07:52 PM | 1 answer(s)

    Does this downpipe line up to a gtx2867R turbo?

    Asked by Brandon | 03/05/2015, 03:55 PM | 1 answer(s)

    i getting the p0421 warm up catalyst efficiency below threshold any could be a bad cat?

    Asked by Vlad | 02/11/2015, 09:54 AM | 1 answer(s)

    What size would I need to attach this to a Cobb exhaust?

    Asked by Braxton | 01/07/2015, 07:53 AM | 1 answer(s)

    Does the short dp bolt to the first cat on the stock exhaust ?

    Asked by Robert | 12/24/2014, 07:44 AM | 1 answer(s)

    I have a 2013 speed3 and I have a ark dts catback exhaust and I was going to buy the catted down pipe and was wondering which flange size would fit. Thanks

    Asked by Tyler | 12/14/2014, 05:29 PM | 1 answer(s)

    I bought the catted DP and hooked it up to the stock exhaust and used the factory donut... if i was to go to a 3 in cat back, do i just remove that donut gasket or do i need to buy an adapter?

    Asked by James Mueller | 11/10/2014, 03:38 PM | 1 answer(s)

    Will this dp bolt to a gt3076 turbo? Says it needs a 3 "dp

    Asked by Harry bender | 11/06/2014, 02:59 AM | 1 answer(s)

    Corksport, I have just finished my full Corksport turboback exhaust. Is there any danger to my car being that I do not yet have a Cobb accessport to monitor my engine? I already installed the Corksport fuel pump upgrade and my other mod is the Corksport SRI. I plan on getting the AP as soon as possible. Thanks!

    Asked by Evan | 10/31/2014, 06:52 AM | 1 answer(s)
    Mazda performance parts financing is available with CorkSport

    Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.