LED DRL Lighting Kit | Mazda & Mazdaspeed Fog Lights

H11 Fog Light Bulbs

Add a functional modern style to your Mazda or Mazdaspeed with the CorkSport LED Fog Lighting Kit. The H11 Fog light bulbs are a direct fit for most Mazda models with standard fog lights. With an output similar to that of most HID light kits in the 6000k color range, the CorkSport LED Fog Light kit replaces the incandescent fog lights with the modern sleek look of white LED lights with a hint of blue.

What's In The Kit?

The CorkSport LED Fog Light Kit for Mazdas includes two bulbs, each with 38 LEDs. The bulbs are a direct plug-in fit for factory fog lights. Your kit will also include instructions on how to access your Mazdas fog lights.

CorkSport Fog Light Kit Installed on Mazdaspeed3

Color Range

Each bulb in the fog light kit is in the 6000k range, which creates a white light with a hint of CorkSport blue. If you're looking for a true daylight color from your fog lights, the 6000k color will be a perfect addition to your setup.

Easy Installation

All CorkSport products come complete with easy-to-follow installation instructions. Our H11 Fog Light Bulbs plug directly into the factory mount, for one of the simplest installations that you will find. You will NOT need to cut wires, add adapters, etc.

Lower Heat Generation

LED’s have a lower power draw than halogen bulbs, and ultimately generate less heat. In the process they are able to last up to 15x longer than a standard halogen bulb, making them an incredible bang for your buck.

Compatible with:: 2004 - 2016 Mazda 3; 2007 - 2013 Mazdaspeed 3; 2006 - 2007 Mazdaspeed 6; 2004 - 2018 Mazda 6; 2011 - 2014 Mazda 2; 2006 - 2010 Mazda 5; 2004 - 2011 Mazda RX-8; 2012 - 2016 Mazda CX-5; 2007 - 2011 Mazda CX-7
Designed in America: Designed in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support:full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

These lights are not reccomended for use as headlights.

How To Install Your CorkSport Fog Light Upgrade

It will take you 1 hour to install the CorkSport Fog Light Upgrade with our easy-to-use instructions.

1 Hour Install Time

1/5 Difficulty

No CEL

Will they fit the 2010/11, Mazda3 gt foglights?

** Yes they will fit **

Dominick05/17/2012, 12:13 AM

I had such a hard time finding HID's or LED's for my 2011 MS3's fog lights because they needed to be so short. Thank you again Corksport for having the right part for the job. They match my 8000k 55 watt HID's in my low beams perfectly. Super fast shipping as usual.

Jeremy Lyczewski05/13/2012, 07:37 PM

I just put a set of these in my Fog's..alittle to much on the Blue side, but they still look good. I have noticed that they tend to build up alittle fog on the inside of the lense when using them in the cold weather...Im thinking its because they run cooler than the stocks and don't build up enough heat to disipate the moisture.

Roy Medley02/25/2012, 01:35 PM

These fog lights are awesome! Easy install 10 min through the wheel well. Fastest shipping i have ever seen. I ordered these on a Wednesday and they were here Friday considering i am on the other side of the country. Keep it up Corksport

Jason Pantano02/05/2012, 05:53 AM

I bought these to replace the halogen bulbs in my MS6's fog lights. The output is slightly more blue than the HID low beams and not quite as bright as the old halogens.

They do look great though! Next I need to upgrade the rest of the lights to LEDs!

Nelson09/24/2011, 08:20 AM

These are awesome, my only gripe is that with my stock HIDs on the 2011 Speed3, the Fogs have a slightly higher light output 6-7K vs 4.5-5k leaving the fogs looking slightly more blue the HIDs... but i love em regardless, now i wanna upgrade the front lights next to the projectors :D

Cezary Koral05/21/2011, 04:59 PM

Great product. looks 10x better than stock. took me 15min to install them even though getting to them is a little tricky, but def doable. Very easy to do. Looks awesome.

Thom05/20/2011, 12:45 PM

These are great and more efficient way than HIDs for your fog lights. I would recommend this product to any Mazda owner.

*TIP*

To install: Go through the wheel well. Turn your wheels and undo the 3 phillips screws connecting the plastic to your fender. Bend it back just enough to get your arm in, and you'll be able to see the driver side fog lamp.

For the passenger side, you'll do the same except you won't be able to see the fog lamp. You'll have to reach in there and feel it out. Reach in and look and look from the front to insert the DRL bulb in the socket.

Mark05/16/2011, 11:34 AM

I just bought a pair of these for my 2010 MS3 fog lights. They are a nice match to my 6000K HID low beams and CS LED interior and LP light kit. Though the light output isn't as high as HIDs, they put out more light than I expected. They are listed as DRLs, so I was mainly buying them to match my HIDs. I am completely satisfied with them, and would recommend them to anyone.

Nathan10/25/2010, 08:18 PM

← Prev

1 2 3 4 5 6 78

Next →

Write a review

My 2008 Mazda3 did not have fog lights and I added them aftermarket. The port did not match the wires in the car, I'm guessing it has to do with the round vs square. How do I know which one I need so I don't order the wrong type?

Asked by Isaac | 03/17/2022, 06:47 AM | 1 answer(s)

Any recommendations for color matched headlights? I hate how much warmer my headlights are. I have a 2010 mazda3 GT with HID.

Asked by eepagan | 09/25/2020, 11:37 AM | 1 answer(s)

Does it come with two fog light bulbs for the price of 60 dollars?

Asked by Allen | 07/07/2020, 07:30 AM | 1 answer(s)

I OWN 2014 MAZDA 5 SKYACTIV. WILL IT THE FOG LIGHT WORK GIVEN THAT IN THE DESCRIPTION IT SAYS UP TO 2010 YEARS ?

Asked by ORAL DALEY | 04/19/2020, 12:08 PM | 1 answer(s)

Will these fit in a 2018 sp25 sedan?

Asked by Dean | 01/20/2019, 08:40 PM | 1 answer(s)

I have a 2011 Mazda3 hatch with fog lights. Which model should I get? Thank you in advance.

Asked by David Burnette | 08/06/2017, 11:41 AM | 1 answer(s)

Do you have an option for the 2007-2009 Mazdaspeed 3?

Asked by Scott | 01/01/2017, 07:41 PM | 1 answer(s)

If I select the fog lights for a 2004-2008 Mazda 6, would I be able to use them in a 2006 Mazdaspeed6?

Asked by Joshua | 11/30/2016, 08:14 PM | 1 answer(s)

Hi ! Could you tell me what model do I buy for A 1st gen mazdaspeed 3 (french) ? Thanks !

Asked by Juju71130 | 09/17/2016, 04:36 AM | 0 answer(s)

Whats up corksport?, Does this fit 2015 mazda3 sgt? I just wanna make sure coz a couple of weeks ago i went on amazon and bought these led fog light bulbs and they look exactly the same as these ones. Anyway, those didnt fit on my car. Bulbs were too thick and didnt fit inside the silver thing inside my foglight house. Thanks!!

Asked by Jerome | 05/05/2016, 03:48 PM | 2 answer(s)

Please add a lumen output. Color temperature means nothing without lumen output. This is coming from someone that works with lighting on a daily basis at work. Thank you.

Asked by Gary Zirk | 02/25/2016, 09:10 AM | 1 answer(s)

I'm wondering how many watts on this fog light?

Asked by Alex Chiu | 02/18/2016, 10:30 PM | 1 answer(s)

Was just curious as to the Lumen output?

Asked by Coulter McGraw | 11/09/2015, 02:03 AM | 1 answer(s)

Since they are H11 bulbs could i use them in my DRL lights ? I already have a pair for my fog lights and wanted to have the same color match for the DRLs. I have the 2015 iTouring 3 so if these would not work do you have any recommendations ?

Asked by Damian Kopec | 03/15/2015, 10:29 AM | 1 answer(s)

Since I don't have HIDs, I don't care about 'matching' the color, but I do want brighter fog lights. Are these brighter than stock bulbs (lumens)? Also do you have any pictures of how much light these throw compared to stock bulbs?

Asked by Steve | 01/15/2015, 09:13 AM | 1 answer(s)