PRE-ORDER ONLY - Expected to ship in ~July

Get added power and upgrade the look of your 2013+ Mazda CX5 with the CorkSport Power Series Axle Back Exhaust. With the release of the 2013 Mazda CX-5, Mazda pushed the Kodo design language into new territories. Suddenly the market had a crossover vehicle with the handling and style of a Mazda. As a completely new vehicle, the engineers at CorkSport were given free rein to design an axle back exhaust in the best way fitting to the graceful design of the CX-5. As always, the CorkSport Mazda CX5 exhaust is constructed from T-304 stainless steel and is TIG welded with precision laser cut flanges, and features full mandrel bending to eliminate any possible flow restrictions.

The CorkSport Advantage:

Stainless Steel T304 construction with 90mm stainless tips for corrosion resistance and a clean stylish look.
Mandrel bent, true 60.5mm piping for increased flow and more power from your engine
Save 8lbs over the stock exhaust.
7+ horsepower gain over the stock exhaust.
CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support

The CX5 Axle Back Exhaust will only work with gas/petrol models. It will not work on diesel models.

Disclaimer: NVH (noise, vibration, and harshness) in the cabin of your vehicle will be slightly increased by the installation of this exhaust, especially on vehicles equipped with an automatic transmission.

What is the size of the exhaust piping diameter? Is it 2.5?

Asked by Eric M | 01/27/2023, 11:56 PM | 1 answer(s)

Is there a video of what it sounds like?

Asked by Ryan | 08/06/2022, 05:57 PM | 1 answer(s)

I'm just curious what difference is between this year range and the 2017 - current is, because there are other manufactures that are offering 1 axle back from 13-current, now if this will fit a 2021, what's the difference between the model that's specifically for the 17 and up and this?

Asked by Mike | 05/19/2022, 12:28 PM | 1 answer(s)

This system fits both 2.0 and 2.5 engine correct?

Asked by James | 04/23/2020, 06:00 PM | 1 answer(s)

this looks so similar to my 2016 CX3 will it fit please tell me it will fit!!?

Asked by Chipolte Negron | 04/12/2019, 10:27 AM | 1 answer(s)

Is there plans on producing the exhaust for the 2018-2019 model year ???

Asked by Craig Damaschi | 02/26/2019, 11:32 AM | 1 answer(s)

Will this fit 2018 cx5?

Asked by Dan | 08/16/2018, 03:51 AM | 1 answer(s)

will this fit the 2017 models

Asked by Rodger | 10/04/2017, 04:48 PM | 1 answer(s)

Will it pass smog inspection in California?

Asked by Jesse | 07/30/2017, 03:21 AM | 1 answer(s)

Will this fit when there is a Class 3 hitch installed?

Asked by Andrew | 01/11/2017, 01:48 PM | 2 answer(s)

1) Your description claims a 7+ hp gain but there is no dyno chart posted- could you please post the dyno chart vs. stock exhaust to back up this claim? 2) As another posted mentioned, could you please post a video/sound clip, from inside the cabin, in a 2.5L CX-5 at highway cruising speed and also a WOT throttle run going through the gears? thanks

Asked by Dan | 09/14/2016, 12:38 PM | 0 answer(s)

this looks so similar to my 2016 CX3 will it fit please tell me it will fit!!?

Asked by Chipolte Negron | 05/16/2016, 09:01 AM | 3 answer(s)

Do you have a video clip to hear the sound on a 2016 cx-5 grand touring?

Asked by Elvis | 05/07/2016, 08:11 AM | 0 answer(s)

Any suggestions for a high flow cat that can bolt onto a 2015 cx5 w/ the CS axle-back exhaust?

Asked by Dean Entwistle | 01/04/2016, 09:48 AM | 1 answer(s)

Will this fit the 2.2L Diesel.

Asked by Jared | 10/22/2015, 06:24 PM | 1 answer(s)

Will this exhaust pass emissions testing?

Asked by Taylor W | 10/10/2015, 08:09 PM | 1 answer(s)

Will the exhaust fit a 2016 CX-5 Grand Touring AWD?

Asked by JTS | 09/28/2015, 07:30 PM | 1 answer(s)

Will it bolt up to a 2016 CX-5 VT / 2.5L/AT /FWD?

Asked by Mark Mitchell | 03/16/2015, 05:03 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

2013-2016 Cx5 2wd and AWD

Thong Nguyen

10/15/2022, 12:51 PM

Comment
Always wanted this since 2017 when I bought my CX-5 new. I’ve received this on 13OCT22 and installed it myself alone. Had a few issues but I managed to get it done. My honest opinion on this his axle back muffler. When I removed the muffler, I tested it to see the sound, it was loud and aggressive, which was cool, but when I installed muffler, it sounded nice but not loud which is good because I live in a nice area. Cold start is suitable, no muffler sounded stronger at cold start, if I wanted to keep the no muffler sound, I would have just custom a Y-pipe on. Driving highway speeds, it’s not loud, which is good but wish it would be louder when I stomp on the pedal. To me, this is probably the sound that Mazda should have given all CX-5 from the factory. The tips are much larger and fill in the bumper better and side view, I can see the tips a lot better then stock. Muffler is shiny but wished corksport would have done a different design and make it like those 350z, G35-37 etc when the pipes are at an angle so people can see the shiny muffler more and see the aggressive look but this design is cool to but wished it would have had a V design with the canisters. Would I recommend this, yeah, but disappointed that I got this at $599.00 ????

Derek

04/11/2022, 02:06 AM

Comment
Hi guys have just installed my new cork sports cat back on my Mazda 2013 cx5 no very loud was hopping for a bit more of a note but over all very happy with it only took 15 minutes to install thanks again guys for getting it to Nth Queensland’s for me

Rick Harris

11/24/2020, 07:39 AM

Comment
Sad day today. I moved into a deeded community and the next door neighbor told me that it's too loud in the morning (cold startup). Fortunately, I kept the stock exhaust, so I put it back on. I'll be trying to see it on Facebook Marketplace. My CX-5 sounds so wimpy again.. LOL

Payton

08/31/2019, 07:47 AM

Comment
Overall I was quite surprised when it arrived, the wields are really nice. I was a bit skeptical since I havent heard clips of the exhaust online for a 13' CX-5 but I've come to realize that the exhaust has a really deep tone (kind of like a bass) It's amazing and It cannot be picked up on a phone microphone when recording (It's that deep) It's a little noisy inside the cabin when you have that deep growl, but I like it that way. I'd say it's well worth the money and if its not loud enough for you, you can always take off the resonator. It also backfires when you shift from 1st to 2nd. 10/10 would recommend if you're looking for a nice deep tone to add to your CX5. It's not rice btw :)

Mike

05/13/2017, 10:11 PM

Comment
Took 15 minutes to install if that (have some muffler strap pliers to make it easy). Sounds great, not like some cracked out weed-whacker. I was told, and accepted, an exhaust that supposedly had a blemish. I gave up looking for the blem as this is all nice and shiny and looks great on the car. Was worried that it would be too loud for the wife during acceleration or downshifting but she likes it. Very happy.

Larry CX-5

01/29/2017, 07:44 AM

Comment
It arrived quickly and packaged well. Installation was easy took maybe 15 minutes Sounds great nice deep tone, Now I can hear what the car is doing like when it shifts etc... I really like it.

Rick Harris

10/04/2016, 06:04 PM

Comment
I put this exhaust on my 2014 CX-5 in about 20 minutes by myself. I sprayed WD40 on the bolts and rubbers about 1/2 hour prior. You will need a 14 mm deep wall socket to take the old muffler off. The CorkSport muffler goes on with a 17 mm and a pair of pliers with no problem. I didn't have a torque wrench so I just didn't over tighten the 17 mm bolts. I'll check it in a couple of days again. The new system is not really loud at all when idling or when the car goes into 6th gear, but it sounds great when you get on it. I assume it'll be loud at cold startup, and then quiet down at idle. All in all, I'm very happy with it so far. Looking forward to the cold air intake later on.