2004-2009 Mazda 3 and 2007-2009 Mazdaspeed 3 LED Light Bulb Upgrade Kit

2007-2009 Mazda 3 and Mazdaspeed 3 LED light Kit Video

Enhance the look of your interior by adding custom LED interior lights. CorkSport's LED light kit replaces the incandescent bulbs for the dome light, map lights, rear hatch light (or trunk if you have a sedan), glove box light, and license plate lights. The lights simply plug in with no custom adapters or wiring required.

The CorkSport Advantage:

Fitment:2007-2009 Mazdaspeed 3, 2004-2009 Mazda 3.
Blue-White Color: 7000k color temperature that enhances interior colors compared with the yellowish light emitted by incandescent bulbs.
Retains the interior dimming light feature in the Mazda 3 and Mazdaspeed 3.
Longer lifespan than the standard bulbs used in the 2004-2009Mazda 3/Mazdaspeed 3
LED lights generate less heat
Resists shock and vibration better
Lower power draw
CorkSport Support and Service: The kit includes 8 LED bulbs and includes vehicle specific installation instructions. Installation of the LED lights takes 30 minutes and requires only two small screw drivers

These came very well packed with great instructions. Very easy install. Looks so much more clean and classier than the yellow stock bulbs. Corksport delivers once again!!!

Tyler Kuenstler05/20/2014, 12:45 PM

This mod is turning head while I get out of my car at night/car meets. The bright 7000k temperature REALLY illuminates the inside front and back of the car, as well as the trunk and license plate! Easy install once again, VERY satisfied.

Quick question, while I drive around and have my light switch on "Door Only" setting, the LED light is still on but EXTREMELY dim. Is it possibly the charge left inside the light bulb or I have a connection problem?

Brandon Legault-Johnson04/27/2014, 10:54 AM

Do these come with lights to go over the rear license plate even if the stock 2007 mazda 3 hatchback doesnt have the license plate lights?

CorkSport Reply:Something is wrong with your Mazda 3 is you are missing the lights. All vehicles in the US are required to have them by law when they are sold. We include the lights which fit for the license plate in our LED kit.

Chase11/17/2013, 08:26 PM

This is a very good and inexpensive modification to make to your Mazda. The installation process was easy and I am very happy with the white light they put out! I have received many compliments from people about the "cool lights" in my car when I unlock it and get in at night. Highly recommend these!

Aaron Baker07/07/2013, 05:52 PM

Is there any blue led lights for some stylish looks available?

CorkSport Reply: We just have the one color option available.

Twilling06/12/2013, 10:47 PM

LOVE these lights! Not only does it improve visibility 100% inside the car in the dark, but also gives the interior a very different, and more "clean" look. I get compliments on my interior lights all the time!

All the bulbs were packaged up very well, and the instructions were easy to follow. Definitely worth the money!!!

Nicole Perryman02/07/2013, 07:20 AM

Bought these babies a while back & all I can say is... Holy Crap!!! The difference is truly Amazing!!! The mod was not only a huge improvement from the OEM parts, it was "DRAMATIC," Nicely done CorkSport!!! I recommend this mod to everyone. It looks great on the license plate display too. Don't forget to complete your new look with the purchase of the LED fog lights. They also look amazing!

Dennis Lamb01/05/2013, 10:33 AM

Bought these babies a while back & all I can say is... Holy Crap!!! The difference is truly Amazing!!! The mod was not only a huge improvement from the OEM parts, it was "DRAMATIC," Nicely done CorkSport!!! I recommend this mod to everyone. It looks great on the license plate display too. Don't forget to complete your new look with the purchase of the LED fog lights. They also look amazing!

Dennis Lamb01/05/2013, 10:32 AM

the white of the LED lights make it look better than the ugly stock bulbs. kit was pretty easy to install into my 05 sedan. tricky areas were map light (i broke part of the base it twists into, and trunk light as it kept popping through so had to try and hold and push at same time) cant wait for the night time!

Andrew Mullard11/16/2012, 08:33 AM

By far the easiest install for anyone. These are a inexpensive yet, easily see a difference from the stock look. I highly recommend doing this. It's a no brainer!

Chad Geiger11/02/2012, 10:58 AM

← Prev

123 4

Next →

Write a review

I have my light switch on "Door Only" setting, the LED light is still on but EXTREMELY dim, but you can tell it's on. Is there a reason its doing that and will it kill my battery?

Asked by James S Adams Jr | 05/06/2023, 08:23 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Tyler Kuenstler

05/20/2014, 12:45 PM

Comment
These came very well packed with great instructions. Very easy install. Looks so much more clean and classier than the yellow stock bulbs. Corksport delivers once again!!!

Brandon Legault-Johnson

04/27/2014, 10:54 AM

Comment
This mod is turning head while I get out of my car at night/car meets. The bright 7000k temperature REALLY illuminates the inside front and back of the car, as well as the trunk and license plate! Easy install once again, VERY satisfied.

Quick question, while I drive around and have my light switch on "Door Only" setting, the LED light is still on but EXTREMELY dim. Is it possibly the charge left inside the light bulb or I have a connection problem?

Chase

11/17/2013, 08:26 PM

Comment
Do these come with lights to go over the rear license plate even if the stock 2007 mazda 3 hatchback doesnt have the license plate lights?

CorkSport Reply:Something is wrong with your Mazda 3 is you are missing the lights. All vehicles in the US are required to have them by law when they are sold. We include the lights which fit for the license plate in our LED kit.

Aaron Baker

07/07/2013, 05:52 PM

Comment
This is a very good and inexpensive modification to make to your Mazda. The installation process was easy and I am very happy with the white light they put out! I have received many compliments from people about the "cool lights" in my car when I unlock it and get in at night. Highly recommend these!

Twilling

06/12/2013, 10:47 PM

Comment
Is there any blue led lights for some stylish looks available?

CorkSport Reply: We just have the one color option available.

Nicole Perryman

02/07/2013, 07:20 AM

Comment
LOVE these lights! Not only does it improve visibility 100% inside the car in the dark, but also gives the interior a very different, and more "clean" look. I get compliments on my interior lights all the time!

All the bulbs were packaged up very well, and the instructions were easy to follow. Definitely worth the money!!!

Dennis Lamb

01/05/2013, 10:33 AM

Comment
Bought these babies a while back & all I can say is... Holy Crap!!! The difference is truly Amazing!!! The mod was not only a huge improvement from the OEM parts, it was "DRAMATIC," Nicely done CorkSport!!! I recommend this mod to everyone. It looks great on the license plate display too. Don't forget to complete your new look with the purchase of the LED fog lights. They also look amazing!

Dennis Lamb

01/05/2013, 10:32 AM

Comment
Bought these babies a while back & all I can say is... Holy Crap!!! The difference is truly Amazing!!! The mod was not only a huge improvement from the OEM parts, it was "DRAMATIC," Nicely done CorkSport!!! I recommend this mod to everyone. It looks great on the license plate display too. Don't forget to complete your new look with the purchase of the LED fog lights. They also look amazing!

Andrew Mullard

11/16/2012, 08:33 AM

Comment
the white of the LED lights make it look better than the ugly stock bulbs. kit was pretty easy to install into my 05 sedan. tricky areas were map light (i broke part of the base it twists into, and trunk light as it kept popping through so had to try and hold and push at same time) cant wait for the night time!

Chad Geiger

11/02/2012, 10:58 AM

Comment
By far the easiest install for anyone. These are a inexpensive yet, easily see a difference from the stock look. I highly recommend doing this. It's a no brainer!

← Prev

123 4

Next →