Reduce wheel hop and driveline slack to get a direct feel from your drivetrain with the CorkSport Mazdaspeed 3 Motor Mount Inserts for the 2010-2013Mazdaspeed 3. Unlike complete replacement motor mounts on the market which can transmit excessive vibration, the CorkSport Motor Mount Inserts fill in the gaps in the factory mount allowing it to retain its vibration isolation while providing a simple and cost effective upgrade to your Mazda for a more enjoyable driving experience.

The CorkSport Advantage:

Constructed from high durometer polyurethane: Designed to fill in the gaps in the factory rubber motor mounts to limit the movement of the engine and transmission
Patterned after the OEM Mazda mounts for accurate fitment
CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support

how to install a transmission mount insert

bummed out till I get an impact gun or something.

well I finally had time to attempt putting this part in it was 4th try no bs, just a lot of life in the way, none the less time came and its easy to get to butttt the damn last center bolt just will not come out I have since lost 1 extension 3/8, 3/8 wrench x2 and 1 of those little squessy stress balls that the face pops out yeah I bit it, now I miss it, but im gonna try again soon. I really want to get this piece in!

Matthew Newton09/28/2013, 12:57 AM

Received my Hood Strut kit, Transmission Mount, and Rear Motor mount. Fits Perfectly. The Trans mount took about 45 minutes to install and went smooth. Definite difference it feeling (Car feels way more solid). I would recommend this with the rear mount. The two really go hand in hand and a must for any MS3 owner.

Got all 3 items installed in 2 hours. so if anyone decides to go that route and get all 3 the install is pretty easy and strait forward and as always the Instructions from CS are very details and dead on.

Thanks CS for a great product and Directions. Can wait to mod some more :)

Tom08/25/2013, 06:30 AM

Does this fit 2007 mazdaspeed 3

CorkSport Reply: No it does not. We are working on the 2007-2009 version.

Stuart Hancock07/19/2013, 06:11 AM

I just installed this piece and went for a drive. This thing really makes a big difference. I already have a rear motor mount. So im not sure how much that helps this part. But before installing this piece i would get pretty bad torque steer. It is pretty much gone now. For $35 this thing is a no brainer. Im very impressed.

Jason06/01/2013, 04:23 PM

A cost-effective upgrade that is a must have for STX-class SCCA Solo competitors where a full mount replacement isn't legal. It greatly helps shift feel while taking a noticeable amount of movement/lash out of the drivetrain.

Chris M.05/13/2013, 01:42 PM

← Prev

1 23

Next →

Write a review

will it fit mazda 3 2013 skyactiv 6speed?

Asked by frank | 05/06/2020, 08:10 AM | 1 answer(s)

Will this work for the 2011 Mazda 3i 2.0? Auto trans

Asked by Tyler | 04/03/2016, 08:25 PM | 1 answer(s)

Is this compatible with the 2010 Mazda3 2.5L with the 6 speed manual?

Asked by Adrian Keels | 12/13/2015, 11:13 AM | 1 answer(s)

Does this transmission mount insert fit Gen 1 MS3?

Asked by Adam | 05/31/2015, 06:26 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits Models

2010-2013 Mazdaspeed 3

2010 Mazdaspeed 3
2011 Mazdaspeed 3
2012 Mazdaspeed 3
2013 Mazdaspeed 3

matthew newton

09/28/2013, 12:57 AM

Comment
bummed out till I get an impact gun or something.

well I finally had time to attempt putting this part in it was 4th try no bs, just a lot of life in the way, none the less time came and its easy to get to butttt the damn last center bolt just will not come out I have since lost 1 extension 3/8, 3/8 wrench x2 and 1 of those little squessy stress balls that the face pops out yeah I bit it, now I miss it, but im gonna try again soon. I really want to get this piece in!

Tom

08/25/2013, 06:30 AM

Comment
Received my Hood Strut kit, Transmission Mount, and Rear Motor mount. Fits Perfectly. The Trans mount took about 45 minutes to install and went smooth. Definite difference it feeling (Car feels way more solid). I would recommend this with the rear mount. The two really go hand in hand and a must for any MS3 owner.

Got all 3 items installed in 2 hours. so if anyone decides to go that route and get all 3 the install is pretty easy and strait forward and as always the Instructions from CS are very details and dead on.

Thanks CS for a great product and Directions. Can wait to mod some more :)

stuart hancock

07/19/2013, 06:11 AM

Comment
Does this fit 2007 mazdaspeed 3

CorkSport Reply: No it does not. We are working on the 2007-2009 version.

Jason

06/01/2013, 04:23 PM

Comment
I just installed this piece and went for a drive. This thing really makes a big difference. I already have a rear motor mount. So im not sure how much that helps this part. But before installing this piece i would get pretty bad torque steer. It is pretty much gone now. For $35 this thing is a no brainer. Im very impressed.

Chris M.

05/13/2013, 01:42 PM

Comment
A cost-effective upgrade that is a must have for STX-class SCCA Solo competitors where a full mount replacement isn't legal. It greatly helps shift feel while taking a noticeable amount of movement/lash out of the drivetrain.

← Prev

1 23

Next →