Mazdaspeed 3 Performance Upgrade Top Mount Intercooler

The Performance Top Mount Intercooler (TMIC) provides solid power gains and a great value to the Mazdaspeed 3, MS6 and CX7 turbo. Made from CorkSport’s own custom cast end tanks which are TIG welded to a 3.0” thick bar and plate core, the Mazdaspeed TMIC provides added performance by removing the bottleneck restriction of the stock intercooler and increasing resistance to heat soak by using thicker materials. The cold pipe connection is CNC milled and drilled for a leak proof connection and all bolt holes have been capped off.

The Performance Mazda Advantage

16 Rows of Cooling Fins help drastically lower post turbo air temperatures for your Mazdaspeed 3.

Better Cooling:

16 Rows of Cooling Fins help drastically lower post turbo air temperatures. Proven on a SuperFlow test bench to provide 46% more airflow over the stock intercooler.

The TMIC, With 3.25 inches of thickness, the extra capacity allows significant cooling capabilities for your Mazdaspeed 3.

More Capacity:

With 3.0" of thickness, the extra capacity allows significant cooling capabilities. During testing, the Mazdaspeed 3 TMIC showed an average decrease in pressure across the core by 53% and an increase in overall efficiency of 25% over the stock intercooler.

Cast Aluminum:

End tanks made of cast aluminum are durable and long lasting. Plus with a bar and plate intercooler core, you remove bottlenecking for more power with less boost.

The CorkSport Advantage

Optional Aluminum Shroud For maximum performance and airflow, or maintain your factory engine shroud to keep a stealth look.
Reduces pre-detonation (knock) of the fuel air charge
Increased resistance to heat soak thanks to larger capacity and better airflow
Fits the 2007-2009 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, 2010+ Mazdaspeed 3, and Cx7
Choose from custom finishing options Rolled Finish for a Gloss look, or Sand Blasted for a Rough Matte finish.
Corksport Service and Support Receive full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

*Stock shroud molding may cause some fins to bend slightly. This will NOT affect performance or efficiency of your TMIC. The easiest and recommended way of removing the offending culprit is to trim the TMIC shroud. See Shroud Fitment Document for more details.

How To Install The Mazdaspeed 3 TMIC Top Mount Intercooler

It will take you 1 hour to install the Mazdaspeed 3 Top Mount Intercooler

1 Hour Install

2/5 Difficulty

2-Year Warranty

No CEL

Amazing product with a great finish. Easy installation along with the CorkSport Boost Tubes helped to really improve both the performance and aesthetics of the engine bay. Couldn't ask for a better product!

Andrew Berhorst04/28/2013, 02:04 PM

Absolutely love the CS TMIC, fit and finish is exactly as described by the CS team. The airflow improvements are noticeable immediately without tune and with a tune the whole engine feels lighter with the turbo not having to work as hard(I'm running SRI+TIH+TMIC). Digging the superior cooling as well! Thanks again to the whole team at CS!

Chuck04/12/2013, 08:21 PM

would it show the same performance gains from 07-09 vs 10'-13' since Gen2 has a hood scoop and Gen 1 does not have a hood scoop.

I am planning on ordering it this afternoon and I currently own an 07' MS3.

thanks ! more power to CS !!!

>>CorkSport Reply: There is more of a gain with the 2010+ Mazdaspeed 3 with the better airflow to the intercooler.

Michael Velasco03/27/2013, 11:56 PM

Great product, make a difference you can feel!!!

Turbojoe12/04/2012, 06:04 AM

Awesome bang for the buck and super simple install. Noticed faster boost on a stock tune, with a tune and supported mods I really noticed the gains.

Jeremy10/09/2012, 05:57 PM

Great product. Excellent build quality and finish. Noticeable improvement in spool time and more top-end.

Nigel09/25/2012, 12:41 PM

Super easy install which increases throttle response and spool of the turbo. Can really feel the difference in higher gears. Go get it!

Kevin08/14/2012, 11:56 AM

Excellent product!

Reed Bamer10/27/2011, 11:05 PM

Great upgrade. Adds a good amount of power in higher gears. Install was 30 minutes at most and I took my time.

Shaun09/10/2011, 06:15 AM

Cant beat the performance for the money! Quality is second to none, and the customer service is always 5 stars!

Alex Z08/02/2011, 09:51 PM

← Prev

1 2 3 456

Write a review

Is there a hp gain on mostly stock gen 1 MS3s with this specific TMIC? I just have the carb legal intake and inlet pipe, hpfp internals, ngk 1step colder sparkplugs.

Asked by Mansur Moosa | 03/14/2022, 08:10 PM | 1 answer(s)

Is this TMIC compatible with CST4 turbo, or I will need FMIC for running the CST4?

Asked by Paul Romero | 03/07/2022, 05:18 PM | 1 answer(s)

This is my daily driver, I was wondering if you would recommend going front mount intercooler or would the top mount be enough for a daily driver for some weekend fun?

Asked by Angel | 11/24/2019, 06:33 PM | 1 answer(s)

Is this supposed to come with hardware because mine only came with two screws i have a 2011 mazdaspeed3

Asked by Randy | 03/29/2019, 04:12 PM | 3 answer(s)

Will the mazdaspeed6 front mount lot come back? And is this tmic the same used in the front mount lot?

Asked by Angel | 09/07/2019, 09:39 AM | 1 answer(s)

I dont see the optional shroud that everyone is talking about do you still offer it? Also I have a 06 speed 6 do they make a FMIC or is this the only option to upgrade?

Asked by Kevin | 06/13/2019, 07:38 AM | 1 answer(s)

Good morning, Will the factory hose and connector work with this upgraded TMIC

Asked by Samuel Fersobe | 05/29/2018, 07:01 AM | 1 answer(s)

Will the stock Mazda CX7 Shroud fit on it?

Asked by mathu | 04/28/2018, 03:35 AM | 1 answer(s)

Two questions actually; 1. How much does the piece weigh vs stock? 2. An earlier question asked about CARB certification for this part -- I am in California and I am interested to find out if this would cause my car to the visibility aspect of the test (where the person conducting the test visually inspects the engine to see if modifications have been made.)

Asked by T.Marc Jones | 07/22/2016, 02:11 PM | 1 answer(s)

I installed this the other day and wow, what a difference I'm seeing. My only concern is I'm getting a high pitched hum (not whistle, more like letting the air out of a balloon and pinching the end but not quite as high pitched as that) coming into the cockpit at high loads from somewhere in or under the dash (hard to pinpoint). Could it be from not running the stock shroud? I'm pretty sure I got all my hoses tightened enough, but before I start troubleshooting I was wondering if anyone else has had this happen? Thanks

Asked by Kevin | 11/14/2017, 04:18 PM | 1 answer(s)

Will this work with an '06 speed6? The TMIC piping changed between '06 and '07, and this TMIC doesn't look like it has the fittings that will work on an '06.

Asked by Archie Sokolik | 09/02/2017, 01:37 PM | 1 answer(s)

I just installed Stage II SRI and the Dual VTA Bypass Valve )OMG, love it!). I want to install this TMIC next before getting an AP. I see you recommend the fuel pump internals prior to installing the TMIC to someone running stock. Should I consider getting the fuel pump internals first? My plan is to do, TMIC then AP, then Cat-Back exhaust. Suggestions?

Asked by Kevin | 01/15/2017, 06:40 PM | 2 answer(s)

Are there any differences between the speed 3 and speed 6 intercooler? Are they interchangeable?

Asked by Zac | 11/22/2016, 07:11 AM | 1 answer(s)

Do I need to upgrade my BCS to run this properly?

Asked by Matt Olson | 09/19/2016, 02:28 PM | 0 answer(s)

Does this meet CARB laws?

Asked by Sergio | 03/27/2016, 10:34 PM | 1 answer(s)

Is there any cooling advantage in purchasing the optional aluminum shroud vs. using the OEM plastic shroud?

Asked by Richard A. | 06/17/2015, 09:06 AM | 3 answer(s)

Do you need the Max Flow Fuel Pump Internals for this Intercooler?

Asked by Kaleb Dailey | 02/28/2016, 11:23 PM | 1 answer(s)

Can I run this on the stock tune safely?

Asked by Nate | 01/15/2016, 05:57 AM | 1 answer(s)

Hi wanted to know if I can install this TMIC with the mods I have now. Cobb AP, Cobb sf, turbo inlet hose, fuel pump internals, Cobb bpv. I don't have the downpipe and I don't have the CBE.

Asked by Jose | 11/02/2015, 08:25 PM | 1 answer(s)

I have a Cobb AP running stage 2, Cobb intake and turbo inlet hose and fuel pump internals. Can I install this tmic with does mods without giving a cell or needing a custome tune?? Thx.

Asked by Jose | 10/30/2015, 06:55 PM | 1 answer(s)

Do I need to reflash using my access port after installing this item?

Asked by Kyle | 10/14/2015, 09:45 AM | 1 answer(s)

Should I re flash my corksport safe mode map from acessport or will it be ok after installing inter-cooler.Corksport Power Series SRI + TIP (Stg 1) Accessport (safe mode map) Corksport DISI silicone boost tubes Corksport DISI silicone BOV hose Corksport shifter bushing set Sure short cut shift plate Rear Motor Mount Inserts No fuel pump internals no down pipe or cat back.

Asked by Kirk | 10/12/2015, 06:55 AM | 1 answer(s)