Shipping Estimator Shipping Estimator

Mazdaspeed 3 TMIC Top Mount Intercooler

Price: $399.99
Price in points:  What are Points? 400 points
Add to wish list

The CorkSport Top Mount Intercooler (TMIC) provides solid power gains and a great value to the Mazdaspeed 3, MS6 and CX7 turbo. Made from CorkSport’s own custom cast end tanks which are TIG welded to a 3.0” thick bar and plate core, the TMIC provides added performance by removing the bottleneck restriction of the stock intercooler and increasing resistance to heat soak by using thicker materials. The cold pipe connection is CNC milled and drilled for a leak proof connection and all bolt holes have been capped off.

The CorkSport Advantage

16 Rows of Cooling Fins help drastically lower post turbo air temperatures for your Mazdaspeed 3.Better Cooling:16 Rows of Cooling Fins help drastically lower post turbo air temperatures. Proven on a SuperFlow test bench to provide 46% more airflow over the stock intercooler.

With 3.25More Capacity: With 3.0" of thickness, the extra capacity allows significant cooling capabilities. During testing, the Mazdaspeed 3 TMIC showed an average decrease in pressure across the core by 53% and an increase in overall efficiency of 25% over the stock intercooler.

Speed3 TMIC increases flow
Cast Aluminum: End tanks made of cast aluminum are durable and long lasting. Plus with a bar and plate intercooler core, you remove bottlenecking for more power with less boost.

The CorkSport Advantage

  • Optional Aluminum Shroud For maximum performance and airflow, or maintain your factory engine shroud to keep a stealth look.
  • Reduces pre-detonation (knock) of the fuel air charge
  • Increased resistance to heat soak thanks to larger capacity and better airflow
  • Fits the 2007-2009 Mazdaspeed 3, 2006-2007 Mazdaspeed 6, 2010+ Mazdaspeed 3, and Cx7
  • Choose from custom finishing options Rolled Finish for a Gloss look, or Sand Blasted for a Rough Matte finish.
  • Corksport Service and Support Receive full color installation instructions, all of the needed installation hardware, and knowledgeable telephone installation support

  • *Stock shroud molding may cause some fins to bend slightly. This will NOT affect performance or efficiency of your TMIC. The easiest and recommended way of removing the offending culprit is to trim the TMIC shroud. See Shroud Fitment Document for more details.

    Mazdaspeed 3 TMIC    &nbspMazdaspeed 3 TMIC

    how to install a Mazdaspeed 3 TMIC

    Perfect fit and looks great! Turbo spools much faster and power is consistent. BATs dropped much lower than the stock TMIC and all this while maintaining a stealth look! Thanks for another great product!
    By far the most intriguing upgrade from Corksports. Simply stunning how well this one part makes your MS3 perform more efficient with the power delivery. The turbo spools way faster and boost continues into the higher RPM ranges much better now while putting down a bit more HP/TQ too. Running an AP safe tune now until I install the CS FP internals and currently have the Stage II Intake/TIP and MZR bypass valve installed. Still safe with FP readings! Beginning to get pretty fast now...

    Ohh and thanks for the postcard CS! The wait wasn't bad with the IC so no worries! Hit me up if you guys ever swing through SC for god know what reason...streets are getting packed with more crazy shit every day!
    Sorry Novice Here...When you say tune what do you mean? I plan on buying the TMIC For my speed 6. Thanks
    do i need to upgrade some parts b4 i buy this?
    hi corksport...i have an SRI stage1 which is already upgraded i still have 2 upgrade anything b4 i buy this top mount intercooler ?
    I Had these awesome TMIC since april 2013! first of, the best finish ever ! and compare to our stock TMIC, this piece is a beast !! definitely worth every penny !
    I have 2012 MS3 & already have catback & short ram intake & I'm planning on purchasing the TMI, down pipe + 80 mm cat & a BOV. Will the engine hold up fine with all these mods or does maintenance need be applied?
    Got this for a great price on a holiday sale, and it's definitely a worthy investment. I'm consistently hitting boost targets even at higher ambient temperatures, and the core is shedding heat at highway speeds much faster than I anticipated for a heavy bar and plate design.
    this tmic looks amazing with the optional powder coated shroud. the power you get from replacing the stock restricting tmic is ridiculous and very noticeable. amazing product and im super happy. thanks again corksport
    Love this product looks great and comparing OEM to this intercooler you can tell the difference the craftsmanship is excellent. I had done a bunch of other upgrades at the time so install was simple and easy. I haven't even put the stock cover on it cause I love the fact you can look inside the scoop form the front of the car and see a big burly intercooler. 2 thumbs up corksport
    Write a review

    This is my daily driver, I was wondering if you would recommend going front mount intercooler or would the top mount be enough for a daily driver for some weekend fun?

    Asked by Angel | 11/24/2019, 06:33 PM | 1 answer(s)

    Is this supposed to come with hardware because mine only came with two screws i have a 2011 mazdaspeed3

    Asked by Randy | 03/29/2019, 04:12 PM | 3 answer(s)

    Will the mazdaspeed6 front mount lot come back? And is this tmic the same used in the front mount lot?

    Asked by Angel | 09/07/2019, 09:39 AM | 1 answer(s)

    I dont see the optional shroud that everyone is talking about do you still offer it? Also I have a 06 speed 6 do they make a FMIC or is this the only option to upgrade?

    Asked by Kevin | 06/13/2019, 07:38 AM | 1 answer(s)

    Good morning, Will the factory hose and connector work with this upgraded TMIC

    Asked by Samuel Fersobe | 05/29/2018, 07:01 AM | 1 answer(s)

    Will the stock Mazda CX7 Shroud fit on it?

    Asked by mathu | 04/28/2018, 03:35 AM | 1 answer(s)

    Two questions actually; 1. How much does the piece weigh vs stock? 2. An earlier question asked about CARB certification for this part -- I am in California and I am interested to find out if this would cause my car to the visibility aspect of the test (where the person conducting the test visually inspects the engine to see if modifications have been made.)

    Asked by T.Marc Jones | 07/22/2016, 02:11 PM | 1 answer(s)

    I installed this the other day and wow, what a difference I'm seeing. My only concern is I'm getting a high pitched hum (not whistle, more like letting the air out of a balloon and pinching the end but not quite as high pitched as that) coming into the cockpit at high loads from somewhere in or under the dash (hard to pinpoint). Could it be from not running the stock shroud? I'm pretty sure I got all my hoses tightened enough, but before I start troubleshooting I was wondering if anyone else has had this happen? Thanks

    Asked by Kevin | 11/14/2017, 04:18 PM | 1 answer(s)

    Will this work with an '06 speed6? The TMIC piping changed between '06 and '07, and this TMIC doesn't look like it has the fittings that will work on an '06.

    Asked by Archie Sokolik | 09/02/2017, 01:37 PM | 1 answer(s)

    I just installed Stage II SRI and the Dual VTA Bypass Valve )OMG, love it!). I want to install this TMIC next before getting an AP. I see you recommend the fuel pump internals prior to installing the TMIC to someone running stock. Should I consider getting the fuel pump internals first? My plan is to do, TMIC then AP, then Cat-Back exhaust. Suggestions?

    Asked by Kevin | 01/15/2017, 06:40 PM | 2 answer(s)

    Are there any differences between the speed 3 and speed 6 intercooler? Are they interchangeable?

    Asked by Zac | 11/22/2016, 07:11 AM | 1 answer(s)

    Do I need to upgrade my BCS to run this properly?

    Asked by Matt Olson | 09/19/2016, 02:28 PM | 0 answer(s)

    Does this meet CARB laws?

    Asked by Sergio | 03/27/2016, 10:34 PM | 1 answer(s)

    Is there any cooling advantage in purchasing the optional aluminum shroud vs. using the OEM plastic shroud?

    Asked by Richard A. | 06/17/2015, 09:06 AM | 3 answer(s)

    Do you need the Max Flow Fuel Pump Internals for this Intercooler?

    Asked by Kaleb Dailey | 02/28/2016, 11:23 PM | 1 answer(s)

    Can I run this on the stock tune safely?

    Asked by Nate | 01/15/2016, 05:57 AM | 1 answer(s)

    Hi wanted to know if I can install this TMIC with the mods I have now. Cobb AP, Cobb sf, turbo inlet hose, fuel pump internals, Cobb bpv. I don't have the downpipe and I don't have the CBE.

    Asked by Jose | 11/02/2015, 08:25 PM | 1 answer(s)

    I have a Cobb AP running stage 2, Cobb intake and turbo inlet hose and fuel pump internals. Can I install this tmic with does mods without giving a cell or needing a custome tune?? Thx.

    Asked by Jose | 10/30/2015, 06:55 PM | 1 answer(s)

    Do I need to reflash using my access port after installing this item?

    Asked by Kyle | 10/14/2015, 09:45 AM | 1 answer(s)

    Should I re flash my corksport safe mode map from acessport or will it be ok after installing inter-cooler.Corksport Power Series SRI + TIP (Stg 1) Accessport (safe mode map) Corksport DISI silicone boost tubes Corksport DISI silicone BOV hose Corksport shifter bushing set Sure short cut shift plate Rear Motor Mount Inserts No fuel pump internals no down pipe or cat back.

    Asked by Kirk | 10/12/2015, 06:55 AM | 1 answer(s)

    Should I re flash my corksport safe mode map from acessport or will it be ok after installing inter-cooler.

    Asked by Kirk | 10/12/2015, 05:50 AM | 1 answer(s)

    About how much horsepower can this tmic handle?

    Asked by Daniel Lopez | 06/20/2015, 02:33 PM | 1 answer(s)

    anyone have an idea how much whp gain over stock ?

    Asked by freak | 04/28/2015, 01:39 PM | 1 answer(s)

    I have an 07 Mazda3. Would this work For my car?

    Asked by D'Amonte Bess | 04/22/2015, 05:13 PM | 1 answer(s)

    Is it safe to run this IC without the shroud? Like if rain came in the hood scoop? And what kind of hp gains??? Debating between this and a DP

    Asked by Allen | 04/09/2015, 05:08 PM | 1 answer(s)

    With this installed in a stock cx-7 will it need to be tuned at all?

    Asked by Matthew | 03/31/2015, 07:34 PM | 1 answer(s)

    Am I able to use the standard rubber and plastic shroud that comes stock on the Gen II's with this or is it better getting the optional shroud?

    Asked by Korey Robinson | 11/04/2014, 02:38 PM | 1 answer(s)
    Mazda performance parts financing is available with CorkSport

    Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.