Mazdaspeed 3 and Mazda 3 Front License Plate Relocation Offset Kit

2nd Gen Mazda 3 Lic Plate relocation kit

Give your 2010-2013 Mazdaspeed 3/Mazda 3 a visual boost and improve airflow with the CorkSport License Plate Relocation Kit. By offsetting your factory license plate and moving it to the drivers side, the CorkSport license plate relocation kit will allow for better airflow and improve the overall look of your 2010+ Mazdaspeed 3.

The CorkSport Advantage:

Impact and temperature resistant: The CorkSport License Plate Relocation kit brackets are made from machined smoked lexan
Improved airflow: Allow for better cooling performance for the cooling system and aftermarket front mounted intercooler kits by moving the factory plate from obstructing airflow
Precision cut bracket for added strength
Upgraded hardware and mounting brackets: The hardware is made from stainless steel and the mounting bracket and base are anodized black to resist the elements and corrosion
CorkSport Service and Support: Receive full color installation instructions, all of the needed hardware and two bumper plugs for the stock location holes.

Install time 1/5 Difficulty 2 year warranty No CEL

Had it for about 5 years now. Still works and looks great!

Charles Solberg06/13/2020, 05:31 PM

Did some one know if this bracket is legal on the state of California

Angel01/25/2020, 12:56 AM

I bought this about a week ago and the threads on the bolt supplied in the kit are flat, while the female threads on the bumper of my 2010 Mazda 3 Sport are tapered, so it goes in a few centimetres and stops. Not very impressed at all.

Nick04/23/2016, 11:03 AM

This product worked very well for me, since I knew I was going to be moving to a state with only a rear license plate, and I did not want holes in my bumper. The only improvement I would make to the product, CORKSPORT PLEASE READ THIS, would be to drill a hole right in the center of the plastic plate mount, so that the main bolt through the bracket can be accessed without taking the whole thing apart. This is exactly what I did on mine, and it makes the mount much easier to install, adjust, and make level. Aside from the 5 minutes it took me to drill that hole, excellent product!

Andrew Theodotou01/12/2016, 05:58 AM

The only thing that would keep this from being a 5 Star rating, is that I had to go to home Depot to buy washers to stop the provided license plate screws from going right through the license plate bolt openings (Horrible wording, but I think it gets the point across). Canadian plates seem to have a gaping opening for those bolts. Maybe include those for future puchases? Otherwise, thanks for the great product!

Alan M01/02/2015, 06:14 AM

the directions suck on there. All I ended up with was a stripped bolt. Never lined up the way it should have. Now I got a bolt sticking out of my grill with no way to get it out.

CorkSport Reply:Matt we would like to help you out, give us a call 360-260-2675

Matt05/21/2014, 11:04 AM

does it work on 2013 Mazda 3?

Blue04/11/2014, 03:35 PM

Why has this price gone up soo high? Last I saw it was around 60$...

Rick03/29/2014, 08:58 AM

Any chance of this fitting a '10 RX-8 R3?

CorkSport Reply:Not this kit but this one will. http://www.corksport.com/corksport-license-plate-kit.html Look at the description in the main listing 09+ Rx8s is a fitment.

JohnnyTsunami01/26/2014, 10:57 AM

Looks great. Easy to install. It takes a couple tries to get it straight but only takes a few minutes at most.

Botas Boke01/19/2014, 01:20 PM

← Prev

12 3

Next →

Write a review

Will this fit the second gen sedan?

Asked by Carmine | 11/18/2024, 09:08 AM | 1 answer(s)

Will this product fit the gen 1 mps ?

Asked by Jarrod | 11/02/2018, 01:01 AM | 1 answer(s)

I been using this for over a year now, it looks great. I will be instaling a Treadstone FMIC kit soon. Will this still work with their crash bar?

Asked by Eric | 05/12/2018, 02:54 PM | 1 answer(s)

The car plate size in USA is 6in x 12in (152.40mm x 304.80mm). The car plate size in Australia is measured in mm and this is 107mm x 372mm (14.65in x 4.22in), given this... I acknowledge that Corksport is an American company focused in Mazda cars in America but.... Do you guys are aware that there is a considerable amount of Mazda's owners that are interested in purchase this upgrade for their car... if you do, is something that you can do about it??. Regards... J.P. (Sydney, Australia)

Asked by J. Palomino | 01/06/2017, 12:52 AM | 2 answer(s)

What are the Lexan Plate dimensions itself?

Asked by Juan | 01/03/2017, 03:59 PM | 1 answer(s)

Is this a universal sided tow plate? (Ie; will it work correctly in australia or will the plate not fit properly due to the different side of figment)

Asked by Korey | 01/18/2015, 11:14 PM | 1 answer(s)

Would I be able to use a license plate cover in conjunction with this mod?

Asked by Truong Nguyen | 11/12/2014, 07:11 PM | 1 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits Models

2010-2013 Mazda 3

2010 Mazda 3
2011 Mazda 3
2012 Mazda 3
2013 Mazda 3

Charles Solberg

06/13/2020, 05:31 PM

Comment
Had it for about 5 years now. Still works and looks great!

Angel

01/25/2020, 12:56 AM

Comment
Did some one know if this bracket is legal on the state of California

Nick

04/23/2016, 11:03 AM

Comment
I bought this about a week ago and the threads on the bolt supplied in the kit are flat, while the female threads on the bumper of my 2010 Mazda 3 Sport are tapered, so it goes in a few centimetres and stops. Not very impressed at all.

Andrew Theodotou

01/12/2016, 05:58 AM

Comment
This product worked very well for me, since I knew I was going to be moving to a state with only a rear license plate, and I did not want holes in my bumper. The only improvement I would make to the product, CORKSPORT PLEASE READ THIS, would be to drill a hole right in the center of the plastic plate mount, so that the main bolt through the bracket can be accessed without taking the whole thing apart. This is exactly what I did on mine, and it makes the mount much easier to install, adjust, and make level. Aside from the 5 minutes it took me to drill that hole, excellent product!

Alan M

01/02/2015, 06:14 AM

Comment
The only thing that would keep this from being a 5 Star rating, is that I had to go to home Depot to buy washers to stop the provided license plate screws from going right through the license plate bolt openings (Horrible wording, but I think it gets the point across). Canadian plates seem to have a gaping opening for those bolts. Maybe include those for future puchases? Otherwise, thanks for the great product!

Matt

05/21/2014, 11:04 AM

Comment
the directions suck on there. All I ended up with was a stripped bolt. Never lined up the way it should have. Now I got a bolt sticking out of my grill with no way to get it out.

CorkSport Reply:Matt we would like to help you out, give us a call 360-260-2675

Blue

04/11/2014, 03:35 PM

Comment
does it work on 2013 Mazda 3?

Rick

03/29/2014, 08:58 AM

Comment
Why has this price gone up soo high? Last I saw it was around 60$...

JohnnyTsunami

01/26/2014, 10:57 AM

Comment
Any chance of this fitting a '10 RX-8 R3?

CorkSport Reply:Not this kit but this one will. http://www.corksport.com/corksport-license-plate-kit.html Look at the description in the main listing 09+ Rx8s is a fitment.

Botas Boke

01/19/2014, 01:20 PM