Shipping Estimator Shipping Estimator

CORKSPORT Mazda Fog Light Kit

 
Price: $59.99
Price in points:  What are Points? 60 points
Gen-8-H11
+
Add to wish list

H11 Fog Light Bulbs

Add a functional modern style to your Mazda or Mazdaspeed with the CorkSport LED Fog Lighting Kit. The H11 Fog light bulbs are a direct fit for most Mazda models with standard fog lights. With an output similar to that of most HID light kits in the 6000k color range, the CorkSport LED Fog Light kit replaces the incandescent fog lights with the modern sleek look of white LED lights with a hint of blue.



 

The CorkSport Advantage
CorkSport Fog Light Kit

What's In The Kit?

The CorkSport LED Fog Light Kit for Mazdas includes two bulbs, each with 38 LEDs. The bulbs are a direct plug-in fit for factory fog lights. Your kit will also include instructions on how to access your Mazdas fog lights.

 

CorkSport Fog Light Kit Installed on Mazdaspeed3

Color Range

Each bulb in the fog light kit is in the 6000k range, which creates a white light with a hint of CorkSport blue. If you're looking for a true daylight color from your fog lights, the 6000k color will be a perfect addition to your setup.

 

Fog Light Kit for Mazdaspeed6

Easy Installation

All CorkSport products come complete with easy to follow installation instructions. Our H11 Fog Light Bulbs plug directly into the factory mount, for one of the simplest installations that you will find. You will NOT need to cut wires, add adapters, etc.

 

Mazdaspeed3 Fog Lights

Lower Heat Generation

LED’s have a lower power draw than halogen bulbs, and ultimately generate less heat. In the process they are able to last up to 15x longer than a standard halogen bulb, making them an incredible bang for your buck.

 

Additional Features
Compatible with:
2004 - 2016 Mazda 3
2007 - 2013 Mazdaspeed 3
2006 - 2007 Mazdaspeed 6
2004 - 2018 Mazda 6
2011 - 2014 Mazda 2
2006 - 2010 Mazda 5
2004 - 2011 Mazda RX-8
2012 - 2016 Mazda CX-5
2007 - 2011 Mazda CX-7
Designed in America: Designed in Vancouver, Washington, in the Pacific Northwest.
CorkSport Service & Support:full-color installation instructions, all necessary components, and knowledgeable telephone support at (360) 260-2675.

Advisory
  • These lights are not reccomended for use as headlights.


How To Install Your CorkSport Fog Light Upgrade

It will take you 1 hour to install the CorkSport Fog Light Upgrade with our easy-to-use instructions.



Fog Light installation instructions

1 Hour Install Time

1 Hour Install Time

Difficulty: 1/5

1/5 Difficulty

No CEL

No CEL

Got these installed on my 2011 Mazda 3 GT, there are way better then the OEM fog light bulbs for sure, install took no longer then 5min on each side, match my headlights thank you.
Got these for my Mazda2 Touring, I have PIAA H4 extrem white bulbs for my headlamps. The PIAA don't match the LED HID color but they are bright. Lights up sings and road lines perfectly.



These look great! I don't have the stock HID's, so I have Silver Stars for my head lights and high beams. These have the whitish blue LED coloring I've come to expect, and they're brighter than my head lights now! It made me laugh, but they're great! Super fast shipping and an easy install!
Gives a matching look to the headlights and that I love. They dont add much light near as I can tell so far; Finsihed the install today and went for a quick putt. The directions said no tools which is not true. Had to remove wheel well cover and front splash guards to access the bulbs. Also my car has a retaining ring (which is the lock mechanism where you "twist clockwise" to lock the bulb ) had to be loosened becuase the bulbs would not twist and lock in otherwise. What should have been plug and play came with a lot more hassle to install. But I'm still pleased with the end result. Would have rateed it higher except the directions mention no tools needed (-1/2) and no mention of the locking ring (-1/2).

Now...if Corksport would just make that CARB certified air intake for our Mazda3's I would be a happy camper.
Absolutely amazing addition to my Mazda3! The LED's match the HID headlights perfectly. Worth ever penny!

For installation on 2010-2012 Mazda3, turn the wheel all the way to the left (for passenger side) or all the way to the right (for drivers side), use a phillips screwdriver to take out the 3 plastic screws that secure the plastic wheel well. Use the screwdriver tip to pop out the 3 plastic washers, then just pull back the wheel well enough to put your arm into the space. Make sure to push the tab on the blue wire housing to unplug the current bulb, and then twist counterclockwise to remove the bulb. Then just put the new bulb in and reconnect the wires. Super easy install! Only took an extra 10 minutes to figure how to open up the wheel well (due to the plastic washers/tabs).

Thanks corksport!
Great replacement to the stock yellow bulbs, they are much more efficient and look significantly better! They are slightly more blue than the stock HIDs on my 07 MS3 GT, but it's barely noticeable.



INSTALLATION for 1st Gen MS3: (I'm merely adding to & correcting Mark's review/install instructions because the CorkSport supplied instructions are utterly useless)

Turn your wheel all the way and undo the 2 phillips screws connecting the black plastic to the fender infront of the wheel. Bend it back just enough to get your arm in (I recommend wrapping a towel around your arm because i cut my arm up pretty bad reaching in there), and you'll be able to see the passenger side fog lamp with a flashlight. Unclip the bulb, turn it to the right and pull out, do not force it, just jiggle. Then place the new bulb in, slightly turned to the right (same position you removed the stock bulb in). This requires patience because it can be hard to line it up correctly. Plug it back in and test it before returning the 2 screws.



For the drivers side, you'll do the same except you won't be able to see the fog lamp due to a piece of plastic. You'll have to reach under the blocking piece of plastic there and feel where the bulb is and repeat above steps.



Took me 10 mins to figure out!

Again, another easy install to differentiate your Speed 3 from the others out there. I cannot say enough about how good these look. I am thrilled about how my car is coming along. Thanks again for the continued quality in your product and services.
Will they fit the 2010/11, Mazda3 gt foglights?



** Yes they will fit **
I had such a hard time finding HID's or LED's for my 2011 MS3's fog lights because they needed to be so short. Thank you again Corksport for having the right part for the job. They match my 8000k 55 watt HID's in my low beams perfectly. Super fast shipping as usual.
I just put a set of these in my Fog's..alittle to much on the Blue side, but they still look good. I have noticed that they tend to build up alittle fog on the inside of the lense when using them in the cold weather...Im thinking its because they run cooler than the stocks and don't build up enough heat to disipate the moisture.
Write a review

Any recommendations for color matched headlights? I hate how much warmer my headlights are. I have a 2010 mazda3 GT with HID.

Asked by eepagan | 09/25/2020, 11:37 AM | 1 answer(s)

Does it come with two fog light bulbs for the price of 60 dollars?

Asked by Allen | 07/07/2020, 07:30 AM | 1 answer(s)

I OWN 2014 MAZDA 5 SKYACTIV. WILL IT THE FOG LIGHT WORK GIVEN THAT IN THE DESCRIPTION IT SAYS UP TO 2010 YEARS ?

Asked by ORAL DALEY | 04/19/2020, 12:08 PM | 1 answer(s)

Will these fit in a 2018 sp25 sedan?

Asked by Dean | 01/20/2019, 08:40 PM | 1 answer(s)

I have a 2011 Mazda3 hatch with fog lights. Which model should I get? Thank you in advance.

Asked by David Burnette | 08/06/2017, 11:41 AM | 1 answer(s)

Do you have an option for the 2007-2009 Mazdaspeed 3?

Asked by Scott | 01/01/2017, 07:41 PM | 1 answer(s)

If I select the fog lights for a 2004-2008 Mazda 6, would I be able to use them in a 2006 Mazdaspeed6?

Asked by Joshua | 11/30/2016, 08:14 PM | 1 answer(s)

Hi ! Could you tell me what model do I buy for A 1st gen mazdaspeed 3 (french) ? Thanks !

Asked by Juju71130 | 09/17/2016, 04:36 AM | 0 answer(s)

Whats up corksport?, Does this fit 2015 mazda3 sgt? I just wanna make sure coz a couple of weeks ago i went on amazon and bought these led fog light bulbs and they look exactly the same as these ones. Anyway, those didnt fit on my car. Bulbs were too thick and didnt fit inside the silver thing inside my foglight house. Thanks!!

Asked by Jerome | 05/05/2016, 03:48 PM | 2 answer(s)

Please add a lumen output. Color temperature means nothing without lumen output. This is coming from someone that works with lighting on a daily basis at work. Thank you.

Asked by Gary Zirk | 02/25/2016, 09:10 AM | 1 answer(s)

I'm wondering how many watts on this fog light?

Asked by Alex Chiu | 02/18/2016, 10:30 PM | 1 answer(s)

Was just curious as to the Lumen output?

Asked by Coulter McGraw | 11/09/2015, 02:03 AM | 1 answer(s)

Since they are H11 bulbs could i use them in my DRL lights ? I already have a pair for my fog lights and wanted to have the same color match for the DRLs. I have the 2015 iTouring 3 so if these would not work do you have any recommendations ?

Asked by Damian Kopec | 03/15/2015, 10:29 AM | 1 answer(s)

Since I don't have HIDs, I don't care about 'matching' the color, but I do want brighter fog lights. Are these brighter than stock bulbs (lumens)? Also do you have any pictures of how much light these throw compared to stock bulbs?

Asked by Steve | 01/15/2015, 09:13 AM | 1 answer(s)
Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.