M-TH 9A-5P | F 9A-12P | SA-SU CLOSED
LOCATED: Vancouver, WA, USA
Shipping Estimator Shipping Estimator
- Menu
- New Products
- CorkSport Merch
- Mazda Performance Air Intake Systems
-
Mazdaspeed 3
- Mazda 3 Turbo
-
Mazda 3 Peformance Parts
- Mazdaspeed 6
- Mazda 6
- Mazda Miata/MX5
- Mazda CX3
- Mazda CX-30
- Mazda CX5
- Mazda CX-50
- Mazda CX7
- 2016+ Mazda CX9
- 2011-2013 Mazda 2
- Mazdaspeed Miata
- Mazdaspeed Protege
- Mazda Protege
- Mazda RX7
- Mazda RX8
- General Application
Mazdaspeed Aluminum Oil Catch Can (includes Drain Valve)
Enhance the reliability of your engine and improve performance and fuel economy with the CorkSport Oil Catch Can. By adding an oil catch can, you will increase the longevity of your engine by helping keep unclean crankcase vapors and oil out of the engines intake. Made of billet aluminum for strength, the CorkSport Oil Catch Can includes everything you need for a complete install. Don’t let your Mazda get contaminated by sediment, crankcase vapors, or unclean oil. With the CorkSport Oil Catch Can you will remove unwanted debris that would normally contaminate the intake tract. This allows for cleaner air entering the engine, lower detonation rates and increases longevity.
The CorkSport Advantage:
- Fitment:2007-2013 Mazdaspeed 3, Mazdaspeed 6, CX-7.
- Superior Construction: Made from high grade billet machined aluminum for strength and low weight.
- Unique Cyclonic Design: Uses vacuum force to separate the oil and contaminants from the air and includes an internal disk to prevent backflow.
- Easy to Check: Twist the dipstick to check how full it is.
- Complete Mounting Kit: Catch can comes complete with a black powder coated steel mounting bracket and 11 ft. of reinforced silicone hose for multiple mounting locations.*
- Drain Valve Kit: Emptying the can is as simple as a flick of the wrist.
- CorkSport Service and Support: Receive a two year limited warranty, full color installation instructions, all of the needed installation hardware, and knowledgeable telephone support.
- This kit includes instructions and supplies for fitment to a Mazdaspeed 3, all other applications may require additional materials or custom modifications.
- If you have the Cold Air Intake, you will need to find an alternate installation location for the catch can.
- Installation note: If you live in an area which gets below zero you need to empty the catch can before the temperatures drop to maintain the functionality.
- Replacing the OEM PCV system with an aftermarket Oil Catch Can System may allow smells of gasoline and oil to ventilate into the engine bay and thus the cabin depending on HVAC settings; this is normal of an Oil Catch Can System especially during idling situations and after shutting off the engine. If excessive smell is noticed, inspect hose connections and drain the catch can.
- Recommended to inspect & verify the PCV is working correctly when installing the OCC Kit. Replace if needed.
How To Install the CorkSport Mazdaspeed Oil Catch Can
It will take you Approx. 2 hour to install.
2 hour Install Time
2/5 Difficulty
2-Year Warranty
No CEL
CorkSport Reply: If it is a MPS3 then yes it will work.
CorkSport Reply:Check out our blog https://www.corksport.com/blog/keep-your-engine-running-cleaner-and-better-with-the-corksport-aluminum-oil-catch-can-and-drain-valve-kit/ and https://www.corksport.com/blog/the-inner-workings-of-the-corksport-oil-catch-can/
CorkSport Reply: This will work on many vehicles, however, installation may be easier or more difficult on other models. The SkyActiv in particular is a very difficult installation due to the location of the PCV and many times requires removal of the entire intake manifold.
Do these oil catch cans make your car smoke at idle? Because ever since I installed the corksport OCC it's been smoking at idle
You may have a routing issue or a blockage. Please send details to sales@corksport.com so our team can assist.
Do I need to clean out the filters in this Catch Can or will draining the oil out when needed simply be enough?
You can pull it out and clean it with brake cleaner as necessary if you wish.
Is there a recommended oil and weight? Would that change when running the catch can? For a 2011 MS3. Thank you.
Installing a catch can set up will not change the oil specs that are recommended for your motor.
Would you do everything the same from routing and placement of the catch can for a 09 mazda cx7. I was a bit confused on how it was routed but I think I understand it from the previous questions that were answered.
As long as you have the top port going to the intake vacuum port and the bottom one teed off with the cam case breather and PCV valve, you are good.
Will the standard location work with a SRI?
That will depend on the SRI design. We have not test fit it with any. However, it should be pretty simple to find alternate mounting points.
Why is this routing chosen for the OCC as opposed to a more simpler one such as the damond ms unit. Seems like itwill more pressure on the crankcase doing it the CS way. Please explain the benefits and the cons.
Because it will always be pulling vacuum. Even in boost when it needs it the most. If you go off the manifold it requires a check valve to prevent pressurization of the OCC and PCV system. This means your only ventilation at WOT is the valve cover breather and that means oil can get consumed or introduced into the induction system. So it actually helps reduce crankcase pressure more if you have it routed this way.
What size is the ID of the vent hose? I am interested in using this in a non-Mazda application. I had one on my MS6 but sold it with the car!
The Vent hoses are 14mm
If installed with the CorkSport Aluminum Skid Plate will the skid plate need to be removed in order to drain the catch can? Are there any tips/tricks for avoiding removal of the skid try in order to drain?
A few people have taken a hole saw to the tray so the draining of the OCC is simplified.
Is this OCC kit include a check valve?
No it does not. Its routed from the PCV/Valve cover and the turbo inlet pipe. The bung on the manifold gets plugged. When its routed this way, a check valve is not required.
Hi, What would it be the Placement of hose after having intalled the Mazda venting kit for smoking at Idle TBS? Thanks
You would want to set it up exactly like you would if you did not have the vent kit.
Are there concerns of aluminum can causing the hot engine air to condense in the winter and then freeze? I've hear of this in many applications during the winter, but don't like the idea of uninstalling for winter since it's such a pain to work with the pcv valve on my speed 3. Would an insulated jacket with a coolant line spiraling around the can help with any condensation and freezing?
In colder climates you can get the water vapor to freeze. A setup which the can was warmed would eliminate any freezing that could occur.
Hello, is this oil catch tank is suitable for diesel engines - e.g. Mazda 6 CD 143 p.s. with DPF? Please send the answer to my e-mail. Thanks! BR Orlin Necov
Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.
Fits
, CX-7.2007-2013 Mazdaspeed 3
- 2007 Mazdaspeed 3
- 2008 Mazdaspeed 3
- 2009 Mazdaspeed 3
- 2010 Mazdaspeed 3
- 2011 Mazdaspeed 3
- 2012 Mazdaspeed 3
- 2013 Mazdaspeed 3
2006-2007 Mazdaspeed 6
- 2006 Mazdaspeed 6
- 2007 Mazdaspeed 6
2006-2012 Mazda CX-7
- 2006 Mazda CX-7
- 2007 Mazda CX-7
- 2008 Mazda CX-7
- 2009 Mazda CX-7
- 2010 Mazda CX-7
- 2011 Mazda CX-7
- 2012 Mazda CX-7
Recommended Products Recommended Products
About CorkSport
ABOUT CORKSPORT
Connect
SPONSORSHIP
Install our webapp on your device
Tap on the
in the top right corner of the screen and "Add to homescreen"