2010+ Mazdaspeed 3 Axle Back Exhaust

2010-2013 Mazdaspeed 3 Axleback Exhaust system

Get added power and upgrade the look of your 2010+ Mazdaspeed 3 with the CorkSport Power Series Axle Back Exhaust. The CorkSport axle back exhaust has been designed to replace your muffler with a straight through pipe to minimize exhaust restrictions and provide a deeper tone. It features mandrel bent, TIG welded 80mm piping for a smooth flow and clean solid connections. The corrosion-resistant T304 polished Stainless Steel construction and 100mm Stainless Steel tips ensure long life and provide a polished aftermarket look to your exhaust system.

The CorkSport Advantage:

Stainless Steel T304 construction with 100mm stainless tips for corrosion resistance and a clean stylish look.
Mandrel bent, true 80mm piping for increased flow and more power from your engine
Muffler Delete Perfect option for customers running an otherwise stock exhaust. Replaces your muffler with a straight through pipe to create a deeper tone and remove exhaust restrictions
CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support

Disclaimer: NVH (noise, vibration and harshness) in the cabin of your vehicle may be slightly heightened by the removal of your mufflers.

Special thanks to jrc89 on Mazdaspeedforums for the video clip!

How To Install Mazdaspeed 3 Axle Back Exhaust.

It will take you 2 hours to install the Mazdaspeed 3 Axle Back Exhaust.

2-hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

will it fit my corksport catback exhaust?

Jamal01/31/2013, 04:18 PM

Will this Axel back exhaust bolt up to my factory piping ?

>>>>CorkSport Reply: Yes it will.

Joey01/24/2013, 11:19 PM

← Prev

1 2 3 4 5 67

Write a review

im trying to replace the gaskets for the axle back where the 2 pieces connect and the other gasket atthe end. what size gasket does it take?

Asked by steve | 12/14/2023, 02:41 PM | 1 answer(s)

Will this axle back exhaust fit my Mazda 3 S 2.5L Sedan?

Asked by Daniel | 02/12/2024, 06:26 AM | 1 answer(s)

>100mm Stainless Steel tips What is the inside diameter?

Asked by Donpei | 11/22/2021, 02:19 PM | 1 answer(s)

I have a resonator delete currently, will that effect the fitment of the exhaust?

Asked by Nick Harris | 09/14/2021, 03:15 PM | 1 answer(s)

Will this axle back fit my 2011 2.5L Mazda3 HB?

Asked by Marc | 02/14/2015, 11:23 AM | 2 answer(s)

Can you get this axle back resonated? Like the one on your cat back system.

Asked by michael hall | 09/15/2018, 03:58 PM | 1 answer(s)

can i purchase the muffler delete pipe portion? (i have the corksport cat back exhaust already)

Asked by Willie Lee Stepney | 08/20/2018, 07:54 PM | 0 answer(s)

I already have this axle-back and looking to upgrade to a full turbo-back. Will I get true 80mm piping throughout with a downpipe and midpipe upgrade, or does this axle-back fit to 65mm?

Asked by Alex | 12/19/2017, 09:11 AM | 1 answer(s)

Do I need to have the HPFP internals installed for this exhaust if I am running the CS SRI now?

Asked by Tim | 01/05/2018, 08:38 PM | 1 answer(s)

Will there be development on a similar axle-back, but single instead of dual outlet?

Asked by Michael | 08/10/2016, 01:40 PM | 1 answer(s)

I already ordered the axle-back and have it, but due to rust I now have to go full catback. If I order the mid-pipe only, does it come with the required hardware to connect the mid-pipe to the downpipe (where the spring bolts are located)?

Asked by Reese Mularz | 06/11/2016, 02:15 AM | 1 answer(s)

Any idea if the axle-back exhaust will fit if using the Curt 11383 class I trailer hitch? Looks like potentially the hanger for the driver's side might interfere.

Asked by Keith | 04/05/2016, 07:16 PM | 1 answer(s)

If i didnt get the mid pipe im i going to hear any sound difference?

Asked by Speed | 02/02/2016, 08:52 PM | 1 answer(s)

When installing cs axleback to stock midpipe, do i need to remove the donut gasket in the midpipe and replace with the flat gasket provided with cs axleback? I have a slight leak but im not sure if its from the flat gasket being misaligned or the stock donut gasket from the stock midpipe. Overall the axleback is great in every aspect other than the slight leak.

Asked by Al M. | 01/29/2016, 06:23 AM | 1 answer(s)