2010-2013 Mazdaspeed 3 Axleback Exhaust system

Get added power and upgrade the look of your 2010+ Mazdaspeed 3 with the CorkSport Power Series Axle Back Exhaust. The CorkSport axle back exhaust has been designed to replace your muffler with a straight through pipe to minimize exhaust restrictions and provide a deeper tone. It features mandrel bent, TIG welded 80mm piping for a smooth flow and clean solid connections. The corrosion-resistant T304 polished Stainless Steel construction and 100mm Stainless Steel tips ensure long life and provide a polished aftermarket look to your exhaust system.

The CorkSport Advantage:

Stainless Steel T304 construction with 100mm stainless tips for corrosion resistance and a clean stylish look.
Mandrel bent, true 80mm piping for increased flow and more power from your engine
Muffler Delete Perfect option for customers running an otherwise stock exhaust. Replaces your muffler with a straight through pipe to create a deeper tone and remove exhaust restrictions
CorkSport Service and Support: Receive a 2 year warranty, full color installation instructions, all of the needed installation hardware and knowledgeable telephone support

Disclaimer: NVH (noise, vibration and harshness) in the cabin of your vehicle may be slightly heightened by the removal of your mufflers.

Special thanks to jrc89 on Mazdaspeedforums for the video clip!

How To Install Mazdaspeed 3 Axle Back Exhaust.

It will take you 2 hours to install the Mazdaspeed 3 Axle Back Exhaust.

2-hour Install Time

2/5 Difficulty

2-Year Warranty

No CEL

This exhaust sounds awesome. Fit great and the quality is just breath taking. Its loud but has a great sound quality.

James Brooks07/22/2013, 01:46 PM

Since the axle back portion of the MS3 fits the MZ3 2.5L, would this fit as well?

CorkSport Reply:It could fit the Mazda 3 but it would be really loud.

Dan07/14/2013, 02:02 PM

Love the look and sound of this on my 2010, I do have a little trouble with keeping the tips lined up properly though. They seem to keep shifting to the left side of the car. Has this been reported by anyone else? I do have the CS poly hangers although I doubt that would be a factor. I've been meaning to take it off again and rebolt to see if I can keep it straight.

CorkSport Reply: Check the flange where the axle back connects to the factory exhaust and make sure it is squared up.

Andy07/09/2013, 07:25 PM

Is it safe to run on an otherwise stock car? I've heard people say you need a fuel pump upgrade or something like supporting mods (intake) to run this. Can I run JUST the axle back on a stock MS3 without Access Port or anything?

CorkSport Reply:You can run the axle back exhaust with no other modifications required.

Jdm Cat06/19/2013, 11:42 AM

Just put this bad boy on yesterday and let me tell you what, it sounds like there is a hungry monster living on the back of my car at wide open throttle its one of the best exhausts ive ever heard i feel a little less lag and pick up speed got a little faster best bang for your buck right here i would expect noting less from corksport thank you guys. rating 1-10 i give it an 11 on looks sound NO Drone whatsoever which is great!!!!!!!!!!! A police officer actually pulled me over to say the exhaust sounds Great!

Daniel Andryszak05/26/2013, 07:38 AM

Which one would be more beneficial the axleback or catback?

CorkSport Reply:The Cat back is made for more power gains.

Russ05/24/2013, 10:12 AM

What a great product, the welds are perfect and everything fits exactly. I installed the exhaust in about 20 min and was off driving, It Sounds amazing and compared to having a small straight pipe out the back this gives more low end Tq. Great Product Corksport! keep us the amazing work! I have video on youtube of the car, search usr name Greyskyy151

Jonathan05/20/2013, 07:08 AM

this comes with all the gaskets and everything correct?

CorkSport Reply: The exhaust includes everything needed for installation.

Daniel Andryszak05/19/2013, 09:23 PM

Will this cause a CEL? please get back to me

Daniel Andryszak05/15/2013, 09:44 PM

is it california legel, and whats the horsepower gain when added with the stage 2 cold air intake

CorkSport Reply: The exhaust does not have a CARB #. The Stage II intake is CARB legal.

Matt05/08/2013, 08:05 PM

← Prev

1 2 3 456 7

Next →

Write a review

im trying to replace the gaskets for the axle back where the 2 pieces connect and the other gasket atthe end. what size gasket does it take?

Asked by steve | 12/14/2023, 02:41 PM | 1 answer(s)

Will this axle back exhaust fit my Mazda 3 S 2.5L Sedan?

Asked by Daniel | 02/12/2024, 06:26 AM | 1 answer(s)

>100mm Stainless Steel tips What is the inside diameter?

Asked by Donpei | 11/22/2021, 02:19 PM | 1 answer(s)

I have a resonator delete currently, will that effect the fitment of the exhaust?

Asked by Nick Harris | 09/14/2021, 03:15 PM | 1 answer(s)

Can you get this axle back resonated? Like the one on your cat back system.

Asked by michael hall | 09/15/2018, 03:58 PM | 1 answer(s)

can i purchase the muffler delete pipe portion? (i have the corksport cat back exhaust already)

Asked by Willie Lee Stepney | 08/20/2018, 07:54 PM | 0 answer(s)

Do I need to have the HPFP internals installed for this exhaust if I am running the CS SRI now?

Asked by Tim | 01/05/2018, 08:38 PM | 1 answer(s)

I already have this axle-back and looking to upgrade to a full turbo-back. Will I get true 80mm piping throughout with a downpipe and midpipe upgrade, or does this axle-back fit to 65mm?

Asked by Alex | 12/19/2017, 09:11 AM | 1 answer(s)

Will there be development on a similar axle-back, but single instead of dual outlet?

Asked by Michael | 08/10/2016, 01:40 PM | 1 answer(s)

I already ordered the axle-back and have it, but due to rust I now have to go full catback. If I order the mid-pipe only, does it come with the required hardware to connect the mid-pipe to the downpipe (where the spring bolts are located)?

Asked by Reese Mularz | 06/11/2016, 02:15 AM | 1 answer(s)

Any idea if the axle-back exhaust will fit if using the Curt 11383 class I trailer hitch? Looks like potentially the hanger for the driver's side might interfere.

Asked by Keith | 04/05/2016, 07:16 PM | 1 answer(s)

If i didnt get the mid pipe im i going to hear any sound difference?

Asked by Speed | 02/02/2016, 08:52 PM | 1 answer(s)

When installing cs axleback to stock midpipe, do i need to remove the donut gasket in the midpipe and replace with the flat gasket provided with cs axleback? I have a slight leak but im not sure if its from the flat gasket being misaligned or the stock donut gasket from the stock midpipe. Overall the axleback is great in every aspect other than the slight leak.

Asked by Al M. | 01/29/2016, 06:23 AM | 1 answer(s)

Would this fit my exhaust system if it's all Stock?

Asked by Tango | 01/23/2016, 11:11 PM | 1 answer(s)

I'm fully stock at the exhaust. Would I be running into exhaust leak trouble. Would it fit good with it or do I need to alter stuff

Asked by Caezar | 01/22/2016, 11:03 PM | 1 answer(s)

So this axle back system will fit the bumper tip cut outs on a mazda 3 gt?

Asked by Nmax | 04/21/2015, 07:56 AM | 1 answer(s)

Will this axle back fit my 2011 2.5L Mazda3 HB?

Asked by Marc | 02/14/2015, 11:23 AM | 2 answer(s)

New post

Mazda performance parts financing is available with CorkSport

Looking to finance your parts purchase and want to get 6 months NO interest on any purchase over $199? Click on the image above for more details.

Fits
2010-2013 Mazdaspeed 3

james brooks

07/22/2013, 01:46 PM

Comment
This exhaust sounds awesome. Fit great and the quality is just breath taking. Its loud but has a great sound quality.

Dan

07/14/2013, 02:02 PM

Comment
Since the axle back portion of the MS3 fits the MZ3 2.5L, would this fit as well?

CorkSport Reply:It could fit the Mazda 3 but it would be really loud.

Andy

07/09/2013, 07:25 PM

Comment
Love the look and sound of this on my 2010, I do have a little trouble with keeping the tips lined up properly though. They seem to keep shifting to the left side of the car. Has this been reported by anyone else? I do have the CS poly hangers although I doubt that would be a factor. I've been meaning to take it off again and rebolt to see if I can keep it straight.

CorkSport Reply: Check the flange where the axle back connects to the factory exhaust and make sure it is squared up.

jdm cat

06/19/2013, 11:42 AM

Comment
Is it safe to run on an otherwise stock car? I've heard people say you need a fuel pump upgrade or something like supporting mods (intake) to run this. Can I run JUST the axle back on a stock MS3 without Access Port or anything?

CorkSport Reply:You can run the axle back exhaust with no other modifications required.

Daniel Andryszak

05/26/2013, 07:38 AM

Comment
Just put this bad boy on yesterday and let me tell you what, it sounds like there is a hungry monster living on the back of my car at wide open throttle its one of the best exhausts ive ever heard i feel a little less lag and pick up speed got a little faster best bang for your buck right here i would expect noting less from corksport thank you guys. rating 1-10 i give it an 11 on looks sound NO Drone whatsoever which is great!!!!!!!!!!! A police officer actually pulled me over to say the exhaust sounds Great!

Russ

05/24/2013, 10:12 AM

Comment
Which one would be more beneficial the axleback or catback?

CorkSport Reply:The Cat back is made for more power gains.

Jonathan

05/20/2013, 07:08 AM

Comment
What a great product, the welds are perfect and everything fits exactly. I installed the exhaust in about 20 min and was off driving, It Sounds amazing and compared to having a small straight pipe out the back this gives more low end Tq. Great Product Corksport! keep us the amazing work! I have video on youtube of the car, search usr name Greyskyy151

Daniel Andryszak

05/19/2013, 09:23 PM

Comment
this comes with all the gaskets and everything correct?

CorkSport Reply: The exhaust includes everything needed for installation.

Daniel Andryszak

05/15/2013, 09:44 PM

Comment
Will this cause a CEL? please get back to me

matt

05/08/2013, 08:05 PM

Comment
is it california legel, and whats the horsepower gain when added with the stage 2 cold air intake

CorkSport Reply: The exhaust does not have a CARB #. The Stage II intake is CARB legal.

← Prev

1 2 3 456 7

Next →